Honda 08L02-SZA-100A Manuals

2 pdf manual(s) Honda 08L02-SZA-100A for free download (Document Types: Installation instructions)

Honda 08L02-SZA-100A Installation instructions [PDF] (5 pages)

  • Identifier: id-2159894
  • Brand: Honda
  • Device: 08L02-SZA-100A Automobile Accessories
  • Type: PDF
  • Key Aspects: Additional Modules and Accessories Guide, Documentation and Revision History, Glossary of Technical Terms
  • UPD Date: 07.07.2026
  • Source File: 2127741.pdf
  • Pages: 5
  • Description: Instructions for safe usage of the Honda 08L02-SZA-100A.
Pages Preview:
  • 2 of 5 AII 46396 (1108) © 2011 American Honda Motor Co., Inc. – All Rights Reserved. INSTALLATION NOTE: • The weight of the cargo must not exceed the maximum weight capacity of 75 kg (165 lbs). • Be extremely careful not to damage the roof and other finished surfaces of the body when installing the roof rails. Installing the Roof Rails 1. Open the tailgate. Using a plastic trim tool, pry up on the rear end of the left roof molding cover. Customer In
  • © 2011 American Honda Motor Co., Inc. – All Rights Reserved. AII 46396 (1108) 3 of 5 5. While wearing eye protection, use an air saw to cut the left roof molding cover along the scribe line as shown. Remove any burrs. 6. Remove the left roof molding by carefully lifting it upward from the four vehicle roof molding clips. 7D0501CX Cut off. SCRIBE LINE AIR SAW LEFT ROOF MOLDING COVER 700202AX LEFT ROOF MOLDING 4 VEHICLE ROOF MOLDING CLIPS 7. Remove and
  • 4 of 5 AII 46396 (1108) © 2011 American Honda Motor Co., Inc. – All Rights Reserved. 9. While wearing eye protection, use an air saw to cut the roof molding at the measurements shown. 10. Install one new roof molding clip to each roof molding. 700205CX AIR SAW Cut off. 85 mm (3.3 in.) FRONT 1,110 mm (43.7 in.) 130 mm (5.1 in.) 893 mm (35.2 in.) Cut off. 700206AX ROOF MOLDING ROOF MOLDING CLIP ROOF MOLDING CLIP ROOF MOLDING CLIP FRONT ROOF MOLDING 11. Re
  • © 2011 American Honda Motor Co., Inc. – All Rights Reserved. AII 46396 (1108) 5 of 5 13. Install the left roof rail with four Torx nuts. Make sure the roof rail is installed in the correct position. Torque the Torx nuts to 12 N·m (9 lbf·ft). 14. Repeat steps 1 through 13 for the right side of the vehicle. 700208CX LEFT ROOF RAIL TORX BOLT This bolt is located on the rear side. 4 TORX NUTS Torx nuts to 12 N·m (9 lbf·ft). FRONT LEFT ROOF RAIL LEFT ROO
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Publications No. Issue Date INSTALLATION INSTRUCTIONS Accessory Application © 2011 American Honda Motor Co., Inc. – All Rights Reserved. AII 46396 (1108) 1 of 5 08L02-SZA-1A00-90 AII 46396 ROOF RAILS P/N 08L02-SZA-100A 2012 PILOT AUG 2011 PARTS LIST Left roof rail Right roof rail Left front roof rail cover Right front roof rail cover Left rear roof rail cover Right rear roof rail cover 8 Torx nuts 4 Roof molding clips TOOLS AND SUPPLIES REQUIRED Phillips screwdriver Flat-tip screwdriver Shop towel Needle nose pliers T-30 Torx driver Tape measure File Drill 3 mm and 10 mm Drill bits Pushpin Eye protection (face shield, safety goggles, etc.) The following tools are available through the Honda Tool and Equipment Program. On the iN, click on: Service > Service Bay > Tool and Equipment Program, then enter the number under “Search”. Or, call 888-424-6857. • Air saw (Snap-on AT192A) • Plastic trim tool (T/N SILTRIMTL10) Illustration of the Roof Rails Installed on the Vehicle QA31001AE RIGHT ROOF RAIL LEFT ROOF RAIL www.collegehillshonda.com

Honda 08L02-SZA-100A Installation instructions [PDF] (5 pages)

  • Identifier: id-1320870
  • Brand: Honda
  • Device: 08L02-SZA-100A Automobile Accessories
  • Type: PDF
  • Key Aspects: Model Variations and Compatibility, Glossary of Technical Terms, Package Contents and Accessories List
  • UPD Date: 14.04.2026
  • Source File: 1406889.pdf
  • Pages: 5
  • Description: Professional manual for the Honda 08L02-SZA-100A.
Pages Preview:
  • 2 of 5 AII 51578 (1405) © 2014 American Honda Motor Co., Inc. – All Rights Reserved. INSTALLATION NOTE: • The weight of the cargo must not exceed the maximum weight capacity of 75 kg (165 lbs). • Be extremely careful not to damage the roof and other finished surfaces of the body when installing the roof rails. Installing the Roof Rails 1. Open the tailgate. Using a plastic trim tool, pry up on the rear end of the left roof molding cover. Customer In
  • © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 51578 (1405) 3 of 5 5. While wearing eye protection, use an air saw to cut the left roof molding cover along the scribe line as shown. Remove any burrs. 6. Remove the left roof molding by carefully lifting it upward from the four vehicle roof molding clips. 7D0501CX Cut off. SCRIBE LINE AIR SAW LEFT ROOF MOLDING COVER 700202AX LEFT ROOF MOLDING 4 VEHICLE ROOF MOLDING CLIPS 7. Remove and
  • 4 of 5 AII 51578 (1405) © 2014 American Honda Motor Co., Inc. – All Rights Reserved. 9. While wearing eye protection, use an air saw to cut the roof molding at the measurements shown. 10. Install one new roof molding clip to each roof molding. 700205CX AIR SAW Cut off. 85 mm (3.3 in.) FRONT 1,110 mm (43.7 in.) 130 mm (5.1 in.) 893 mm (35.2 in.) Cut off. 700206AX ROOF MOLDING ROOF MOLDING CLIP ROOF MOLDING CLIP ROOF MOLDING CLIP FRONT ROOF MOLDING 11. Re
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Publications No. Issue Date INSTALLATION INSTRUCTIONS Accessory Application © 2014 American Honda Motor Co., Inc. – All Rights Reserved. AII 51578 (1405) 1 of 5 08L02-SZA-1A00-90 AII 51578 ROOF RAILS P/N 08L02-SZA-110A 2015 PILOT MAY 2014 PARTS LIST Left roof rail Right roof rail Left front roof rail cover Right front roof rail cover Left rear roof rail cover Right rear roof rail cover 8 Torx nuts 4 Roof molding clips TOOLS AND SUPPLIES REQUIRED Phillips screwdriver Flat-tip screwdriver Shop towel Needle nose pliers T-30 Torx driver Tape measure File Drill 3 mm and 10 mm Drill bits Pushpin Eye protection (face shield, safety goggles, etc.) The following tools are available through the Honda Tool and Equipment Program. On the iN, click on: Service > Service Bay > Tool and Equipment Program, then enter the number under “Search.” Or, call 888-424-6857. Air saw (Snap-on AT192A) Plastic trim tool (T/N SILTRIMTL10) Illustration of the Roof Rails on the Vehicle QA31001AE RIGHT ROOF RAIL LEFT ROOF RAIL www.collegehillshonda.com

Honda 08L02-SZA-100A: Automobile Accessories Category Related Instructions

W-GRIP
ivtec W-GRIP
26.08.2026 2 pages

W-GRIP ʙ MAX ˂ x1 : 120 km/h ˂ x2 : 110 km/h ˂ x3 : 100 km/h ˂ x4 : 90 km/h MAX ƙ 20 kg A = 32 mm; B = 22 mm 32 mm x 22 mm 32 mm x 22 mm 32 mm x 22 mm 32 mm x 22 mm WG12S-1704-01 BG DE FR Operating and Safety Instructions Thank you for choosing our produ Device setup manual for the ivtec W-GRIP Automobile Accessories. It describes operating procedures and power requirements, replacement parts, device calibration.

381320-32-1
ACV 381320-32-1
15.04.2026 4 pages

All installation work must be performed by a qualified professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages. Compatible with these Double-DIN devices: Double-DIN Navigation Installation Manual Dou Essential instructions for the ACV 381320-32-1 Automobile Accessories. This guide presents operational procedures, support details, supported accessories.

HF800 - Bluetooth hands-free Speakerphone
Motorola HF800 - Bluetooth hands-free Speakerphone
25.07.2026 25 pages

® HF800 Auricular inalámbrico Guía del usuario Wireless Portable Speaker User Guide 1 Welcome The Motorola Wireless Portable Speaker HF800 with Bluetooth ® technology defies traditional expectations. This hands-free product by Motorola makes connectivity i Maintenance instructions for the Motorola HF800 - Bluetooth hands-free Speakerphone Speakers. This reference manual outlines diagnostic information, software configuration, safety guidelines.

Seat Leon LIGHTBAR 05-09 1P
carDNA Seat Leon LIGHTBAR 05-09 1P
01.05.2026 2 pages

. EINBAUANLEITUNG . INSTRUCTION LED Rückleuchten Seat Leon LIGHTBAR 05-09 1P/ Seat Leon LIGHTBAR 09+ 1P1 CarDNA LED taillights Seat Leon LIGHTBAR 05-09 1P/ Seat Leon LIGHTBAR 09+ 1P1 CarDNA Öffnen Sie die Heckklappe des Fahrzeugs. / Open the trunk of the car Instruction guide for the carDNA Seat Leon LIGHTBAR 05-09 1P Automobile Accessories. The guide outlines procedures for interface navigation, safety information, network configuration, operational safety.