Hunter Ernest Hemingway Series Manuals

42746-01 • 04/26/07 Step Title 2 42746-01 • 04/26/07 • Hunter® Fan Company Table of Contents 1 • Getting Ready......................................................4 2 • Assembling the Skirt........................................5 3 • Assembling the Base........................................6 4 • Assembling the Table......................................8 5 • Assembling the Fan..........................................9 6 • Assembling the Light Kit............................10 7 • Completing Assembly..................................11 8 • Operating and Cleaning Your Fan.........12 9 • Troubleshooting..............................................13 Welcome © 2007 Hunter Fan Company® READ AND SAVE THESE INSTRUCTIONS. Your new Hemingway by Hunter® fan is an addition to your outdoor living environment that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for assembling and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best fan available anywhere in the world. Before assembling your fan, for your records and warranty assistance, record information from the carton and Hemingway by Hunter® nameplate label (located on the top of the fan motor housing) on the front cover of this manual. For Your Records and Warranty Assistance Model Name: ______________________ Catalog/Model No.: _________________ Serial No.: ________________________ Date Purchased: ____________________ Where Purchased: _ _________________ For reference also attach your receipt or a copy of your receipt to the manual. Step Title 3 42746-01 • 04/26/07 • Hunter® Fan Company Important Information General & Location: • Use ONLY Hunter® replacement parts. • This fan is intended for outdoor use ONLY. This fan is suitable for wet locations. If the fan has been subjected to extreme weather conditions, inspect before use. • This fan MUST be assembled by three or more people. Do NOT attempt to assemble this fan without assistance. • Make sure the installation site you choose allows the fan blades to rotate without any obstructions within 6 feet of end of fan blades. A minimum clearance of 7 feet from the finished surface to the bottom edge of the fan blade is required. • If locating under an awning or covering, we recommend a minimum awning or covering height of 10 feet. • This fan is NOT to be used on, or within 6 feet of stairs. Warnings: • To reduce the risk of personal injury, assemble the fan according to these instructions, and use only the hardware supplied. • To reduce the risk of personal injury, do NOT bend the blade attachment system when installing, balancing, or cleaning the fan. NEVER insert foreign objects between rotating fan blades. • To avoid possible electrical shock, before relocating your fan, disconnect the power by unplugging the power cord from the electrical outlet. • To reduce the risk of electrical shock, keep fan at least 16 feet away from pools and spas. NEVER place the fan where it can fall or be pulled into a pool or hot tub. • To reduce the risk of electrical shock, ALWAYS connect to an outlet provided with a Ground Fault Circuit Interrupting Device (GFCI). • ALWAYS keep power cord dry and out of water (puddles, pools, fountains). • This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. Do NOT attempt to defeat the purpose of this safety feature. Cautions: • Do NOT climb on pole or table (if applicable). • Do NOT use an extension cord with this fan. • Do NOT place objects on power cord. • Do NOT operate if: a) the power cord or plug is damaged; b) the appliance malfunctions; or c) the unit has been damaged in any manner. Contact Hunter® Fan Company’s Service Department. Do not return to the retailer. • Do NOT operate within 6 feet of objects or walkways. • Do NOT assemble or operate this fan on unlevel ground. This fan may ONLY be placed on level decks, level patios, level ground or similar flat, level surfaces. • All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. • Before each use, inspect the power cord for cuts, wear and/or abrasion marks. If any are found, or any wires are exposed, the appliance should be serviced and the power cord replaced. Please contact Hunter®® Fan Company’s Service Department. Do not return to the retailer. Read this entire manual carefully before beginning installation. Save these instructions. Step Title 4 42746-01 • 04/26/07 • Hunter® Fan Company 1 • Getting Ready To assemble this fan, be sure each person can do the following: • Connect electrical wires. • Lift 50 pounds. If you need help installing the fan, your Hemingway by Hunter® fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for assembling the fan: • Standard screwdriver • Phillips-head screwdriver • Allen Wrench (included) • 7/16” Wrench or pliers Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts. Refer to the Parts Guide Sheet included in the carton. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter® dealer or call Hunter® Technical Support Department at 888-830-1326. Assembling Multiple Fans? If you are assembling more than one fan, keep the fan blades and blade irons in sets, as they were shipped. ATTENTION: This fan must be assembled by three or more people. Do not attempt to assemble this fan without assistance. This fan weighs approximately 150 lbs.