Ice Qube IQ150FPW Manuals
1 pdf manual(s) Ice Qube IQ150FPW for free download (Document Types: Installation and operation instructions)
Ice Qube IQ150FPW Installation and operation instructions [PDF] (1 pages)
- Identifier: id-1282362
- Brand: Ice Qube
- Device: IQ150FPW Fan
- Type: PDF
- Key Aspects: Environmental Factors and Restrictions, FAQ Section for Common Queries, Component Longevity Optimization
- UPD Date: 24.03.2026
- Source File: 1305340.pdf
- Pages: 1
- Description: Complete instruction guide for the Ice Qube IQ150FPW.
Click to expand and read text
IQ150FPW, IQ250FPW, IQ300FPW, IQ500FPW Wash Down Filtered Fan System Installation and Operation Instructions QD-ENG-20 Rev.2 Ice Qube’s IQ150FPW/IQ250FPW/IQ300FPW/IQ500FPW Wash Down Filtered Fan System has been designed for cooling electronic equipment housed within an enclosure - where the electronics can operate at temperatures slightly above ambient and the enclosure may be subjected to splashing water or hose-direct wash down. Each filtered fan system comes complete with intake and exhaust modules, serviceable intake filter, mounting hardware, gasket and power cord. Installation: ***Please read complete instructions thoroughly before beginning installation. *** Ice Qube’s wash down filtered fan systems ship to you fully assembled. On all models, the intake module has a power cord and a serviceable polypropylene filter. On the IQ300FPW and the IQ500FPW models, the exhaust module also has a power cord. The filter must be cleaned periodically, depending upon ambient conditions. To clean the filter, it is recommended to disconnect the electrical power from the intake module. Next, remove the filter cover panel on the front of the intake module by loosening the screws. Remove the filter by pulling the tab at the center of the filter. Clean the filter by soaking it in mild solution of detergent and water - then rinsing in clean, warm water. Use a Shop-Vac to remove excess water from the filter before returning it to the intake module. It is recommended to have an additional clean filter in stock to prevent excessive equipment downtime. 1. Prepare the enclosure by cutting an opening for each module’s power cord and drilling holes for mounting. (See Cutout drawings for sizes and mounting hole locations) For best performance, it is recommended to install the intake near the bottom of the enclosure and the exhaust near the top of the enclosure on opposite sides. 2. Apply the provided gasket material to the perimeter of both intake and exhaust modules. (See Gasket Drawing). Apply to the side which has the mounting studs protruding. 3. Attach the intake and exhaust modules (gasket side toward enclosure) to the enclosure using the provided mounting hardware. Use a wrench to secure the nuts and bolts, slightly compressing the gasket material to approximately 1/8” thick to form a seal. 4. Attach the power cord(s) to a properly grounded electrical power supply of proper voltage and current inside of the enclosure. Electrical connection should be made by a qualified technician. 5. After applying electrical power to the fan, it should begin operation immediately and continuously. Listen for any unusual noise or vibration. Remove power immediately if noise or vibration are noted or unit does not begin operation! If you have questions or require assistance please contact: Ice Qube, Inc. (888) 867- 8234
IQ150FPW: Related Instructions
1 Evolution Series Air Conditioners Class I Division 2 Groups A, B, C, & D Hazardous Locations or Nonhazardous Locations OPERATION AND INSTALLATION MANUAL *** I Instruction booklet for the Ice Qube Evolution Series Air Conditioner. It describes usage and hardware components, technical overview, network configuration.
IQ150FPW, IQ250FPW, IQ300FPW, IQ500FPW Wash Down Filtered Fan System Installation and Operation Instructions QD-ENG-20 Rev.2 Ice Qube’s IQ150FPW/IQ250FPW/IQ30 Owner’s guide for the Ice Qube IQ150FPW Fan. The document covers setup instructions, software updates, safety.
8-15-REV1 1 Blade Series Heat Exchanger Operation and Installation *IMPORTANT* For safe and satisfactory operation, please read the following instructions. Kee Technical instruction manual for the Ice Qube Blade Series Industrial Equipment. The manual outlines technical specifications and installation, calibration steps, device calibration.
FPP Filtered Fan Systems OM – FPP February 2009 Ice Qube FPP filtered fan systems have been designed to cool electronic equipment housed within an enclosure w Quick reference guide for the Ice Qube IQ100FPP Fan. It details device setup and usage procedures, operational safety, performance details, setup.
Evolution Series Air Conditioners Zone 2 ATEX and IECEx Hazardous Locations* OPERATION AND INSTALLATION MANUAL *** IMPORTANT *** PLEASE READ this manual and fol Operating instructions for the Ice Qube Evolution Series Air Conditioner. The manual describes user preferences, maintenance procedures, service instructions, specifications.
Filtered Fan Systems Ice Qube filtered fan systems have been designed for cooling of electronic equipment housed within an enclosure in ambient conditions which Complete user documentation for the Ice Qube IQ100FP Fan. The manual contains instructions for usage procedures, energy usage, repair references.
Similar Manuals in the Fan Category
ATX-OM-F004E-H PRODUCT NAME Air-Cooled Aftercooler MODEL / SERIES HAA7 HAA15 HAA22 HAA37 © 2020 SMC CORPORATION All Rights Reserved. This manual is intended to Quick start guide for the SMC Networks HAA7 Series Fan. It outlines installation and dimensions and layout, shutdown procedures, operating modes, startup procedures.
IMPORTANT INSTRUCTIONS - OPERATING MANUAL SAVE THESE INSTRUCTIONS www.airkinglimited.com 6727902 Rev. D 10-16 1 of 12 Exhaust Fan with Light Models: DL4S, DL4SG User instructions for the AirKing DL4S Fan. It covers basic operation, detailing setup, application scenarios, component replacement.
HOW TO USE This appliance is for household use and may be plugged into a standard electrical outlet. ASSEMBLY INSTRUCTIONS 1. Align hole at the end of bottom pi Operating handbook for the Applica WSF1610 Fan. This documentation provides step-by-step guidance on error handling, component replacement, calibration steps.
Operating instructions W3G300-WK13-30 Translation of the original operating instructions ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone Technical operation manual for the ebm-papst W3G300-WK13-30 Fan. It offers details on hardware components, operational safety, setup tips.