Icom IP100FS Manuals

System requirements ■ (As of January 2015) D PC CPU Clock ........... Intel® Core™2 Duo Processor E6600/2.40 GHz, equivalent or faster System memory ..2 GB or more Monitor ................ Full HD (1920 x 1080) recom- mended At least XGA (1024 x 768) Sound card ..........For sounding alarms Speaker ...............For sounding alarms LAN ..................... 100BASE-TX or faster Other: USB 1.1 or 2.0 Hard disk .............At least 1 GB of free space. NOTE: DO NOT install more than 2 LAN cards in the PC. Operating System D Microsoft® Windows® 8.1 Microsoft® Windows® 8 Microsoft® Windows® 7 (SP1 or later) Microsoft® Windows Vista® (SP2 or later) � •��The�IP100FS�can�be�used�with�both�32�and�64�bit�ver- sions�of�the�operating�systems�listed�above. � •��Except�for�“RT”�versions�of�Microsoft® Windows® 8.1 or Microsoft® Windows® 8. USB flash drive and its files ■ The USB drive contains the IP100FS and its installer. •��“REMOVABLE”� and� “CD� Drive� ICOM”� windows� appear� when the USB flash drive is attached to the PC. DO NOT restart or shutdown the PC with the USB flash�drive�attached�to�it.�This�may�be�the�cause�of� data loss and malfunctions. ALWAYS remove the flash�drive�from�the�PC�before�restarting�or�shutting� down the PC. PC Standby mode ■ Depending on the PC, the software may not operate properly�after�returning�from�the�standby�mode.�If�this� occurs,�turn�OFF�your�PC’s�standby�mode.� Options ■ *1� �When�using�with�the�IP100FS,�the�MONITOR�switch�is� disabled. *2� �CT-23�is�necessary�when�you�connect�the�SM-26�and� the PC. Note on the CT-23: •��The�CT-23�audio�communication�contains�a�high� pitched tone that most people cannot hear. Howev- er,�if�you�do�hear�it,�lower�the�PC’s�audio�volume. •��If�the�booster,�amplifier�or�filtering�function�is�set� in the microphone interface of the PC, deactivate them. •��If�the�microphone’s�PTT�malfunction�occurs,�adjust� the microphone recording level properly. About the firewall setting ■ The�IP100FS�communication�may�be�blocked�by�your� firewall. In�that�case,�a�protocol�and�port�numbers�listed�below� should�be�allowed�to�pass�the�firewall.� See�your�firewall�instructions�for�the�correct�settings.� Protocol: UDP Port number: � Source�Port�Number*�→ Server�Port�Number* � Source�Port�Number*�← Server�Port�Number* � Source�Port�Number*�← Dynamic port *��Refer�to�the�port�numbers�set�in�the�site�settings�of� the IP100FS. (→ Menu�Bar�>�Option�>�Setting...�) R WARNING! NEVER�disassemble,�modify�or�repair� the IP100FS USB flash drive. This may result in an electrical�shock,�cause�a�fire�or�damage�the�drive. R WARNING! NEVER operate or touch the IP100FS USB flash drive with wet hands. This may result in an electrical shock or damage the drive. CAUTION: DO NOT place the IP100FS USB flash drive in direct sunlight. This could damage the IP100FS drive. CAUTION: DO NOT use�harsh�solvents�such�as�ben- zine or alcohol to clean the IP100FS USB flash drive, as�they�can�damage�the�drive’s�surfaces.�If�the�USB� flash�drive�becomes�dusty�or�dirty,�wipe�it�clean�with�a� dry, soft cloth. Always place the IP100FS USB flash drive in a secure place�to�avoid�inadvertent�use�by�children. PRECAUTIONS INSTRUCTIONS The IP100FS ip advanced radio system remote com- municator allows you to remotely communicate with WLAN transceivers connected to your IP1000C from a PC through IP networks. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before�using�the�IP100FS. SAVE THESE INSTRUCTIONS — These instructions contain important safety and operating instructions for the IP100FS. EXPLICIT�DEFINITIONS WORD DEFINITION RWARNING! Personal� injury,� fire� hazard� or� electric� shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of�personal�injury,�fire�or�electric�shock. IP�ADVANCED�RADIO�SYSTEM REMOTE�COMMUNICATOR OPERATION�NOTE •��Ensure� that� your� PC� supports� USB� port(s)� operation� by� confirming�the�Universal�Serial�Bus�controller�is�in�the�PC’s� Device Manager. •��We� recommend� that� you� insert� the� IP100FS� USB� flash� drive�to�the�PC’s�USB�port.�Connecting�it�through�a�hub� may damage the drive or make it work improperly. •��When�operating�the�PC�or�external�devices,�see�their�in- struction manuals for operational details. INSTALLATION�NOTE FCC�INFORMATION CAUTION: Any changes or modifications not expressly ap- proved�by�Icom Inc., could void your authority to operate the equipment under FCC regulations. FOR CLASS B UNINTENTIONAL RADIATORS: This�equipment�has�been�tested�and�found�to�comply�with� the limits for a Class B digital device, pursuant to part 15 of the�FCC�Rules.�These�limits�are�designed�to�provide�reason- able�protection�against�harmful�interference�in�a�residential� installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in ac- cordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guaran- tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television�reception,�which�can�be�determined�by�turning�the� equipment off and on, the user is encouraged to try to correct the�interference�by�one�or�more�of�the�following�measures: �•�Reorient�or�relocate�the�receiving�antenna. �•��Increase�the�separation�between�the�equipment�and�re- ceiver. �•��Connect�the�equipment�into�an�outlet�on�a�circuit�different� from that to which the receiver is connected. �•��Consult�the�dealer�or�an�experienced�radio/TV�technician� for help. 1.�BEFORE�STARTING�THE�IP100FS Follow the instructions and install the IP100FS dispatching software. The IP100FS USB flash drive must also be inserted into the PC every time you start up the IP100FS dispatching software. •�To�operate�the�software,�refer�to�the�IP100FS�Help�file.� •��Purchase�a�speaker,�headset�or�a�microphone�(See�options�below)�to�meet�your�needs. The�displayed�dialogue�boxes,�indications�or�opera- tions may differ slightly, depending on your system settings,�type�of�OS�and�its�service�pack*�level. * In this leaflet, service pack is written as SP from further on. IP100FS About the IP100FS Help file: �Please�refer�to�the�Help�file�of�the�software�for�assistance� with the functions or settings. To�open�the�Help�file,�click�“Help”�in�the�Menu�Bar�of�the� software�and�select�“Help,”�or�simply�push�the�[F1] key on the�PC’s�keyboard. USB flash drive HM-152 hand microphone SM-26*1 desktop microphone CT-23*2 ptt microphone adapter 1-1-32�Kamiminami,�Hirano-ku,�Osaka�547-0003,�Japan A-7119W-1EX-q Printed in Japan © 2014–2015 Icom Inc. 2. INSTALLING THE IP100FS ��•��Make�sure�Windows�has�completed�its�start-up,� and no other applications are running. �•�Make�sure�you�are�logged�in�as�the�administrator. Insert the USB flash drive into the USB port. ��Double-click�“IP100FS_Setup.exe”�in�the�REMOV- ABLE drive. If�the�“User�Account�Control”�window�appears,�click� [Yes]�to�continue. �Click�[Next�>]. NOTE: If your PC has already installed the software, the uninstallation or update screen appears. 1 2 These�Instructions�are�based�on�using�Windows�7. 3.�STARTING�THE�IP100FS NOTE: Before starting the IP100FS, connect the speaker, headset or microphone that you are going to use. The location of the [USB] port may differ, depending on your PC. Refer to the PC’s instruction manual on the USB port for details. To the [USB] Port USB flash drive 3 4 5 ��Click�[Next�>]. �Click�[Install]. �Click�[Finish]. 6 7 8 Click the IP100FS icon in the Start menu. •��You� can� also� start� the� software� by� simply� double-� clicking the IP100FS icon on your desktop. •��If�the�“User�Account�Control”�window�appears,�click� [Yes]�to�continue. 1 2 Click�“Option”�on�the�Menu�Bar,�and�then�click� “Setting....” To log in as the administrator enter: User ID .......................admin Password ....................admin NOTE on the USB flash drive: •��The�USB�flash�drive�must�be�inserted�into�the�USB�port� when installing and starting the IP100FS. •��Remove�the�USB�flash�drive�from�the�USB�port�before� restarting or shutting down the PC, otherwise you may lose your data, or damage the device. •��Remove�the�USB�flash�drive�from�the�USB�port�after� completing the site settings. FURTHER�INFORMATION Removing the USB flash drive D q �Click�the� icon�in�the�task�tray,�and�then�click�,�as�shown�below. � •��Refer�to�your�PC’s�instruction�manual�if�the��icon�does�not�ap- pear in your task tray. wRemove� the� USB� flash� drive� when� the� �message is displayed. Double-click Click If you want to install the software in a differ- ent� location,� click� [Change...]� then� select� a� desired location on the displayed screen. Click Click Click 3 The IP100FS login window appears. •��The�user�ID�and�password�listed�below�are�set�as� default. Set the sites, destinations and so on on the dis- played software screen. •��Refer�to�the�IP100FS�Help�file�for�more�details�on� the settings. 4 D Uninstalling the IP100FS Follow� the� instructions� below� to� uninstall� the� IP- 100FS. �•�Make�sure�you�are�logged�in�as�the�administrator. q �Click� the� � button� and� then� click� . Click . w e �Right-click� ,� and� then� click� . �Click�[Yes]�in�the�uninstallation�confirmation�dialog. r t �If�the�“User�Account�Control”�dialog�appears,�click� [Yes]�to�uninstall. D Reinstalling the IP100FS Once�the�uninstalling�is�complete�as�described�above,� you�can�reinstall�the�IP100FS�by�following�the�steps�in� “2�INSTALLING�THE�IP100FS.” Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United�Kingdom,�Germany,�France,�Spain,�Russia,�and/or�other�countries. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. All�other�products�or�brands�are�registered�trademarks�or�trademarks�of�their�respective�holders.

Version 1.0 March 2014 IP Advanced Radio System IP100H / IP1000C / IP100FS Demonstration Setup Guide DGX-IP1000C/IP100H -V1.0 This guide is designed to provide demonstration setup guide about Icom’s IP ADVANCED RADIO SYSTEM, based on the IP100H’s firmware Revision 1.02 and IP1000C’s firmware Revision 1.02. If you have any questions about this guide, please contact your local Icom distributors. Guide Revisions Icom reserves the right to make changes to the content of this guide at any time without notice or obligation. Trademarks Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or other countries. Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. IDAS is a trademark of Icom Incorporated. © 2014 Icom Inc. OUTLINE DGX-IP1000C/IP100H -V1.0 SECTION 1 REQUIRED EQUIPMENT ..................................................................................................... 1 SECTION 2 SETTING EXAMPLES .......................................................................................................... 2 2-1 STAND ALONE NETWORK CONNECTION AND IP ADDRESS SETTINGS ............ 2 2-2 IP NETWORK CONNECTIONS AND SETTING EXAMPLES ..................................... 9 2-3 HOW TO SET AND USE THE ID LIST ...................................................................... 16 2-4 HOW TO ENTER AND SEND A MESSAGE ............................................................. 21 2-5 HOW TO SET AND USE THE IP100FS .................................................................... 27 SECTION 3 Q & A ................................................................................................................................... 51 TABLE OF CONTENTS