JWA ALECTO 68046 Manuals

INSERT PAGE NUMBER Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt ASSEMBLY INSTRUCTION ALECTO 68046 Ottoman fold out bed 1000 800 440mm Allow 15 min For 2 person Additional tools required 1 PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for completeassembly 4. Always read the assembly instructions carefully before beginning assembly. 5. Keep all hardware parts and packaging out of reach of smallchildren. 6. Do not over tighten the screws and bolts as this may damage the threads 7. Assembly is to be carried out by a competent adult(s)ONLY 8. During assembly, children should be kept away from the product due to possible risk to injury. 9. Do not use this item if any components are missing or damaged. 10. Please keep the instructions for future reference. PART ITEM QTY 1 Headboard 1 2 Frame 1 3 Feet 4 PARTS LIST 1 2 3 3 3 3 2 STEP1: • Prepare a floor or bench with a blanket or cardboard. • Stand the FRAME(2) one its side, have another person hold it. • Screw in the 4 x FEET(3), as shown below. 3