Kolver EDU 2AE/TOP Manuals

3 pdf manual(s) Kolver EDU 2AE/TOP for free download (Document Types: Manual )

Kolver EDU 2AE/TOP Manual  [PDF] (39 pages)

  • Identifier: id-1621950
  • Brand: Kolver
  • Device: EDU 2AE/TOP Power Supply
  • Type: PDF
  • Key Aspects: Common Issue Diagnostic Flows, Environmental Factors and Restrictions, Safety Recommendations and Warnings
  • UPD Date: 26.07.2026
  • Source File: 1608373.pdf
  • Pages: 39
  • Description: Full operation manual for the Kolver EDU 2AE/TOP.
Pages Preview:
  • Vers. 111219 Page 2 EDU 2AE/TOP power supply and control units are an innovative system for controlling the torque of any current control MITO and PLUTO electric screwdrivers: MITO15, PLUTO 3, PLUTO 6, PLUTO 10, PLUTO 15, PLUTO 20, PLUTO 30, PLUTO45, PLUTO50 and PLUTO70, either inline, pistol, push to start, for automation and with angle head (only PLUTO). It’s also possible to use the following clutch models: PLUTO 3FR/HS, PLUTO 5FR and PLUTO 7FR. EDU 2
  • Vers. 111219 Page 3 P L U T O 1 0 T% : 1 0 % P R : 1 S : 0 / 0 1 T : A : r e a d y 1- Reached torque level in Nm, lbf.in or kgf.cm 2- Program number or sequence 3- Screwdriver model 4- Torque level in percentage 5- Screw count: done screws/total screws 6- Angle value in degrees (only EDU 2AE-TOP TA model) 7- Status bar (ready, errors, etc…) FRONT PANEL KEYBOARD To enter the menu press the ESC key for 2 seconds. Select the line by pressing or then press O
  • Vers. 111219 Page 4 MAIN MENU: - - - - - MA I N - ME NU - - - - - - OK c h a n g e E S C q u i t P r o g r a m s e t t i n g S e q u e n c e s e t t i n g Program setting: It indicates the menu section where you can set or modify the fastening parameters. IMPORTANT: To work with switch box, socket tray and remote it is mandatory to go to Sequence Menu (Ext Box: ON). Sequence: It indicates the menu section where you can activate the sequence, the swit
  • Vers. 111219 Page 5 If the number of correct screws matches to the number of set screws, “PROGRAM END” will appear on the status bar and the yellow led will light up. If the “Press OK” is ON (see point 18), “PROGRAM END” will automatically disappear at next screwing or any time you enter the menu. Otherwise, press OK at the end of each program. ATTENTION: Every time you enter the menu, the number of screws will reset. - - - - - ME NU - - P R :
  • Vers. 111219 Page 6 - - - - - ME NU - - P R : 1 - - - - - 6 ) Tm F a s t s p d : 0 . 3 s 7 ) F a s t s p d : o f f 8 ) F i n a l s p d : 6 0 0 r p m 7) Fast spd (Fast Speed): You can select the speed of the screwdriver during the FAST SPEED. It can be set between max speed and the Final Speed (see point 8). This function is available only if the Fast Speed Time is ON. 8) Final Spd (Final Speed): You can select any speed value of the screwdriver betwe
Document Preview & Text Transcription (Main Page)
Click to expand and read text
MANUAL EDU 2AE/TOP - EDU 2AE/TOP/E - EDU 2AE/TOP/TA 5.00 Torque range: 0.2-50 Nm UIDENTIFICATION DATA OF THE MANUFACTURER KOLVER S.r.l. VIA M. CORNER, 19/21 36016 THIENE (VI) ITALIA UIDENTIFICATION DATA OF THE PRODUCT MODEL: EDU 2AE/TOP EDU2AE/TOP/E EDU2AE/TOP/TA CODE: 032000/TOP 032000/TOP/E 032000/TOP/TA TECHNICAL DATA OF THE PRODUCT FUSE: 3,15 A DIMENSIONS: 190 x 205 x h120 mm WEIGHT: 2,5 Kg DECLARATION OF CONFORMITY KOLVER S.r.l. declares that the new tool here described: control unit model EDU2AE/TOP and EDU2AE/TOP/TA is in conformity with the following standards and other normative documents: 2006/42/CE, LVD 2014/35/UE, EMCD 2014/30/UE, EN 280519, EN 60204-1, EN 61000-6-2, EN 61000-6-3. It is also in conformity with RoHS III normative (2011/65/UE and following 2015/863). Name: Giovanni Colasante Position: General Manager Person authorized to compile the technical file in Kolver Thiene, January 1st 2020 Giovanni Colasante

Kolver EDU 2AE/TOP Manual  [PDF] (24 pages)

  • Identifier: id-1501885
  • Brand: Kolver
  • Device: EDU 2AE/TOP Control Unit
  • Type: PDF
  • Key Aspects: Periodic Inspection Checklists, Routine Functionality Testing, Information on Regular Maintenance
  • UPD Date: 03.09.2026
  • Source File: 1496544.pdf
  • Pages: 24
  • Description: User instructions for the Kolver EDU 2AE/TOP.
Pages Preview:
  • Manual EDU 2AE/TOP e EDU 2AE/TOP/TA Rev.0 Pagina 2 EDU 2AE/TOP power supply and control units are an innovative system for controlling the torque of any current control PLUTO electric screwdriver: PLUTO 3, PLUTO 6, PLUTO 10, PLUTO 15, PLUTO 20 and PLUTO 35, either inline, pistol, with angle head or for automation. It’s also possible to use the following clutch models: PLUTO 3FR, PLUTO 5FR and PLUTO 7FR. EDU 2AE/TOP delivers all the advantages of precisio
  • Manual EDU 2AE/TOP e EDU 2AE/TOP/TA Rev.0 Pagina 3 IMPORTANT: EDU 2AE/TOP is a highly accurate unit but it is critically important to select the correct options to ensure that proper torque is being applied. Read the menu description carefully and in case you are unsure please contact Kolver for support information. Turn the unit on through the on/off switch on the back panel. The unit will carry a general system check and the words “waiting connection
  • Manual EDU 2AE/TOP e EDU 2AE/TOP/TA Rev.0 Pagina 4 MAIN MENU: - - - - - M A I N - M E N U - - - - - - O K c h a n g e E S C q u i t     P r o g r a m s e t t i n g S e q u e n c e s e t t i n g Program setting: It indicates the menu section where you can set or modify the fastening parameters. To be allowed to enter this menu sequence and EXT options should be OFF. Sequence: It indicates the menu section where you can activate the sequence, the
  • Manual EDU 2AE/TOP e EDU 2AE/TOP/TA Rev.0 Pagina 5 - - - - - M E N U - - P R : 1 - - - - - 3 ) M o d e l : P L U T O 1 0     4 ) T o r q u e : 1 0 % 5 ) J o i n t : S O F T 3) Model: you can select the screwdriver to be used. Your choice will automatically change the default settings. It’s important to select the correct model you’re going to use since most parameters regarding the motor software are specific to every single mod
Document Preview & Text Transcription (Main Page)
Click to expand and read text
MANUAL Vers. 1.0 EDU 2AE/TOP e EDU 2AE/TOP/TA Torque range: 0.4-35 Nm UIDENTIFICATION DATA OF THE MANUFACTURER KOLVER S.r.l. VIA M. CORNER, 19/21 36016 THIENE (VI) ITALIA UIDENTIFICATION DATA OF THE PRODUCT CONTROL UNIT MODEL: EDU 2AE TOP CODE: 031000/TOP - 031000/TOP/TA TECHNICAL DATA OF THE PRODUCT TRANSFORMER: 230V AC 50 Hz – 40 V DC 200 VA FUSE: 3,15 A DIMENSIONS: 190 x 205 x h120 mm WEIGHT: 4 Kg DECLARATION OF CONFORMITY KOLVER S.r.l. declares that the new tool here described: control unit model EDU 2AE is in conformity with the following standards and other normative documents: 2006/42/CE, 2006/95/CE, 2004/108/CE, EN 60745-1, EN 60204-1, EN 61000-6-1, EN 61000-6-3. It is also in conformity with the RoHS normative. Name: Giovanni Colasante Position: General Manager Person authorized to compile the technical file in Kolver Thiene, June 1st, 2012 Giovanni Colasante

Kolver EDU 2AE/TOP Manual  [PDF] (27 pages)

  • Identifier: id-1742185
  • Brand: Kolver
  • Device: EDU 2AE/TOP Control Unit
  • Type: PDF
  • Key Aspects: Detailed Installation Instructions, Cleaning and Sanitization Methods, Error Code Explanations
  • UPD Date: 23.05.2026
  • Source File: 1798097.pdf
  • Pages: 27
  • Description: Official operating instructions for the Kolver EDU 2AE/TOP.
Pages Preview:
  • Manual EDU 2AE/TOP and EDU 2AE/TOP/TA Rev. 3 Page 2 EDU 2AE/TOP power supply and control units are an innovative system for controlling the torque of any current control MITO and PLUTO electric screwdrivers: MITO15, PLUTO 3, PLUTO 6, PLUTO 10, PLUTO 15, PLUTO 20, PLUTO 35 snd PLUTO50, either inline, pistol, for automation and with angle head (only PLUTO). It’s also possible to use the following clutch models: PLUTO 3FR, PLUTO 5FR and PLUTO 7FR. EDU 2AE/
  • Manual EDU 2AE/TOP and EDU 2AE/TOP/TA Rev. 3 Page 3 Press any key on the front panel to enter the main screen (see following picture). P L U T O 1 0 1 0 : 0 0 P R : 1 S : 0 / 0 1 T : A : w a i t i n g 1- Reached torque level in Nm, in.lbs or kgf.cm 2- Program number or sequence 3- Screwdriver model 4- Clock 5- Screw count: done screws/total screws 6- Angle value in degrees (only EDU 2AE-TOP TA model) 7- Status bar (ready, errors, etc…) FRONT PANEL KEYBOA
  • Manual EDU 2AE/TOP and EDU 2AE/TOP/TA Rev. 3 Page 4 MAIN MENU: - - - - - MA I N - ME NU - - - - - - OK c h a n g e E S C q u i t P r o g r a m s e t t i n g S e q u e n c e s e t t i n g Program setting: It indicates the menu section where you can set or modify the fastening parameters. Sequence: It indicates the menu section where you can activate the sequence, the switchbox/socket tray and the bar code. - - - - - MA I N - ME NU - - - - - - S e q u
Document Preview & Text Transcription (Main Page)
Click to expand and read text
MANUAL EDU 2AE/TOP e EDU 2AE/TOP/TA Torque range: 0.2-50 Nm UIDENTIFICATION DATA OF THE MANUFACTURER KOLVER S.r.l. VIA M. CORNER, 19/21 36016 THIENE (VI) ITALIA UIDENTIFICATION DATA OF THE PRODUCT CONTROL UNIT MODEL: EDU 2AE TOP - EDU 2AE TOP/TA CODE: 031000/TOP - 031000/TOP/TA TECHNICAL DATA OF THE PRODUCT TRANSFORMER: 230V or 110V AC 50 Hz – 40 V DC 200 VA FUSE: 3,15 A DIMENSIONS: 190 x 205 x h120 mm WEIGHT: 4 Kg DECLARATION OF CONFORMITY KOLVER S.r.l. declares that the new tool here described: control unit model EDU 2AE is in conformity with the following standards and other normative documents: 2006/42/CE, 2006/95/CE, 2004/108/CE, EN 60745-1, EN 60204-1, EN 61000-6-1, EN 61000-6-3. It is also in conformity with the RoHS II normative. Name: Giovanni Colasante Position: General Manager Person authorized to compile the technical file in Kolver Thiene, Oct. 25, 2013 Giovanni Colasante

EDU 2AE/TOP: Related Instructions

mini K1/S
Kolver mini K1/S
30.06.2026 21 pages

TORQUE TESTER mini K1/S mini K5/S mini K20/S mini Ke/S OPERATOR’S HANDBOOK KOLVER S.r.l - Via Corner, 19/21 - 36016 THIENE - ITALY - tel. +39 0445 371068 fax Practical user guide for the Kolver mini K1/S Test Equipment. It provides information on installation and troubleshooting guides, product maintenance, installation support, device reset instructions.

KBL04FR
Kolver KBL04FR
16.04.2026 8 pages

KOLVER S.r.l. VIA MARCO CORNER, 19/21 36016 THIENE (VI) ITALIA Dichiara che la macchina nuova qui descritta/ Declares that the new tool here described: Avvitato Technical guide for the Kolver KBL04FR Power Screwdriver. This documentation explains configuration and network configuration, installation support, connectivity setup, compatibility information.

032000
Kolver 032000
24.07.2026 168 pages

Operational Manual EDU2AE - EDU2AE/HPRO Torque range: 0.35-70 Nm UIDENTIFICATION DATA OF THE MANUFACTURER KOLVER S.r.l. VIA M. CORNER, 19/21 36016 THIENE (VI) I Comprehensive setup guide for the Kolver 032000 Power Supply. This guide presents performance details, product specifications, device features.

ACC2210
Kolver ACC2210
16.07.2026 5 pages

DECLARATION OF CONFORMITY KOLVER S.r.l. VIA MARCO CORNER, 19 36016 THIENE (VI) ITALIA Declare that the new tool here described: Electric screwdriver: ACC2210 14 Device instruction guide for the Kolver ACC2210 Power Tool. The document covers calibration steps, maintenance schedule, startup procedures, user settings.

EDU 2AE/TOP/E
Kolver EDU 2AE/TOP/E
24.07.2026 39 pages

MANUAL EDU 2AE/TOP - EDU 2AE/TOP/E - EDU 2AE/TOP/TA 5.00 Torque range: 0.2-50 Nm UIDENTIFICATION DATA OF THE MANUFACTURER KOLVER S.r.l. VIA M. CORNER, 19/21 360 Practical operating guide for the Kolver EDU 2AE/TOP/E Power Supply. This manual details device reset instructions, operating guidelines, network configuration, performance details.

FAB03SS/FR
Kolver FAB03SS/FR
16.03.2026 3 pages

DECLARATION OF CONFORMITY KOLVER S.r.l. VIA MARCO CORNER, 19/21 36016 THIENE (VI) ITALIA Declare that the new tool here described: Electric screwdriver: FAB03SS Installation reference manual for the Kolver FAB03SS/FR Power Tool. This documentation details performance optimization, product maintenance, software installation.

Similar Manuals in the Controller, Control Unit, Power Supply Category

SS-TH60
Watermark SS-TH60
01.04.2026 6 pages

INSTALLTION FOR MINIATURE THERMOSTATIC VALVE Rev. 8/19 P a g e | 1 SS-TH60 – 1/2” MINIATURE THERMOSTATIC VALVE WITH VOLUME CONTROL SS-TH70 – 1/2" MINIATU Complete service manual for the Watermark SS-TH60 Control Unit. The manual provides step-by-step instructions on maintenance schedule, safety information, system configuration, component replacement.

M-7064
ICP DAS USA M-7064
12.08.2026 7 pages

ICP DAS CO., LTD. Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: [email protected] M-7064(D) Quick Start 1 Quick Start For M-7064(D) June Installation and maintenance guide for the ICP DAS USA M-7064 Control Unit. This documentation details procedures for network setup, setup validation, specifications.

HAWK-800
Wantegrity HAWK-800
13.07.2026 39 pages

-1- Quick reference guide for the Wantegrity HAWK-800 Synthesizer. This guide presents performance guidelines, safety precautions, firmware installation.

VMIVME-7455
VMIC VMIVME-7455
21.04.2026 20 pages

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment • FAST SHIPPING AND DELIVERY • TENS OF THOUSANDS OF IN-STOC Essential instructions for the VMIC VMIVME-7455 Control Unit. The documentation includes performance details, service instructions, hardware components.