Kolver K1 Manuals

2 pdf manual(s) Kolver K1 for free download (Document Types: Operator's handbook manual)

Kolver K1 Operator's handbook manual [PDF] (15 pages)

  • Identifier: id-1255509
  • Brand: Kolver
  • Device: K1 Test Equipment
  • Type: PDF
  • Key Aspects: Periodic Inspection Checklists, Regulatory Compliance and Standards, Control Panel and Interface Navigation
  • UPD Date: 13.07.2026
  • Source File: 902760.pdf
  • Pages: 15
  • Description: Complete user documentation for the Kolver K1.
Pages Preview:
  • 2 1.FEATURES OVERVIEW Controlling torque is quintessential for companies to ensure that product's quality, safety and reliability isn't compromised. Insufficiently torqued fasteners can vibrate loose overtime and when excessively torqued the threaded fasteners can strip. Using a quality torque tester has become increasingly important for many companies to secure that proper torque is being applied.  The K1.K5.K20 Torque Tester is built for accuracy and
  • 3 3. MOUNTING It is strongly recommend securing the tester through slots “1” to a workbench before operating. Immobilizing the tester when checking torque values over 3 Nm is critical for the safety the operator as well as for the accuracy of torque measurements during operation. 4. JOINT SIMULATOR (run down adapter) The Joint Simulator (JS) consists of a screw compressing a series of washers (see §11). The way the washers are mounted can simulate sof
  • 4  Push the ^ key to enter the menu and adjust the various settings to your requirements.  Insert the joint simulator into its 13mm hex. seat and make sure the screw is in its upper position (if not run the driver anticlockwise to unscrew it). The tester is ready.  Run the joint simulator screw all the way down until it stops and read the torque value on the display. Run the screw up to be ready for the next cycle.  Press the “ON/ESC” key f
  • 5 MENU OPTIONS  MODEL This screen gives you information on the unit you are using, like serial number, software version etc. Such data are password protected.  LANGUAGE You can choose between English and Italian.  SETUP The following is a quick reference for the Set-Up menu structure. If lost within the menu, you can turn the analyser OFF and ON at any time. MODE: The Torque Tester offers three different mode of displaying torque information durin
Document Preview & Text Transcription (Main Page)
Click to expand and read text
K1 - K5 - K20 TORQUE TESTER OPERATOR’S HANDBOOK KOLVER S.r.l - Via Corner, 19/21 - 36016 THIENE - ITALY - tel. +39 0445 371068 fax. +39 0445 371069 [email protected] - www.kolver.it

Kolver K1 Operator's handbook manual [PDF] (21 pages)

  • Identifier: id-1225326
  • Brand: Kolver
  • Device: K1 Test Equipment
  • Type: PDF
  • Key Aspects: Documentation and Revision History, Risk Mitigation and Accident Prevention, Unpacking and Inspection Guidelines
  • UPD Date: 02.06.2026
  • Source File: 932947.pdf
  • Pages: 21
  • Description: Official operating instructions for the Kolver K1.
Pages Preview:
  • 1. APPLICATIONS Recommended for all hand screwdrivers, wrenches, or power tools. 2. FEATURES Model Torque range Nm Accuracy miniK1/S 0,05 – 1 ± 1 cNm miniK5/S 0,3 – 5 ± 2 cNm miniK20/S 0,5 – 20 ± 3 cNm minike/5/S 0,5 - 5 ± 3 cNm minike/25/S 2 - 25 ± 10 cNm minike/50/S 5 - 50 ± 10 cNm  Built-in transducer to measure on joint simulator.  External transducer (miniKe/S).  Three units of torque measurements: Nm, Kgf.cm, lbf.in.  Battery
  • When critical applications are involved, we recommend to verify the torque output of the power tool being used on the actual assembly through an external transducer. Minik1 is supplied with a built-in joint simulator. NB. We recommend to grease the JS each 1000 cycles. 6. STARTING AND OPERATING THE TESTER 1. Immobilize the tester when checking torque values over 1 Nm. This is critical for the safety the operator as well as for the accuracy of torque measur
  • Push ON/OFF Push UNIT Pr Push emere ON/OFF Push at the same time CLEAR+UNIT for 5 sec. See “Prg” Push “UNIT” per scorrere la lista. -TRACK: Track Mode active. -OFF : Automatic reset off. -ON : Automatic reset on . Push “ON/OFF” to save or “CLEAR” to exit After 3 sec. see “SEnS” Push UNIT Push ON/OFF See “rST” Automatic detection of FATC. Once finished, remove the weight and push “ON/OFF” to save or “UNIT” to go to Manual Mod
  • 9. EXTERNAL TRANSDUCER for miniKe The minike readouts support an external rotary or non rotary transducer. The minike can read torque up to 500 Nm. The external transducer must be calibrated together with the minike here at Kolver before shipment. The following transducers are always available ex stock: Model Torque range Nm KTE5 0.5 – 5.0 KTE25 2.0 – 25.0 Rotary and non rotary transducers for lower or higher torque ranges available on request. 10. SE
  • 12. WARRANTY 1. This KOLVER product is guaranteed against defective workmanship or materials, for a maximum period of 12 months following the date of purchase from KOLVER, provided that its usage is limited to single shift operation throughout that period. If the usage rate exceeds of single shift operation, the guarantee period shall be reduced on a prorata basis. 2. If, during the guarantee period, the product appears to be defective in workmanship or ma
Document Preview & Text Transcription (Main Page)
Click to expand and read text
TORQUE TESTER mini K1/S mini K5/S mini K20/S mini Ke/S OPERATOR’S HANDBOOK KOLVER S.r.l - Via Corner, 19/21 - 36016 THIENE - ITALY - tel. +39 0445 371068 fax. +39 0445 371069 [email protected] - www.kolver.it

K1: Related Instructions

EDU 2AE/TOP/NT
Kolver EDU 2AE/TOP/NT
24.08.2026 30 pages

MANUAL EDU 2AE/TOP/NT - EDU 2AE/TOP/NT/E - EDU 2AE/TOP/NT/TA Torque range: 0.01-0.15 Nm UIDENTIFICATION DATA OF THE MANUFACTURER KOLVER S.r.l. VIA M. CORNER, 19 Maintenance and service manual for the Kolver EDU 2AE/TOP/NT Power Supply. The documentation guides users through setup and setup validation, calibration steps, reset instructions.

DOCK05
Kolver DOCK05
30.07.2026 14 pages

Vers. 072821 1 DICHIARAZIONE DI CONFORMITA’/ DECLARATION OF CONFORMITY KOLVER S.r.l. VIA MARCO CORNER, 19/21 36016 THIENE (VI) ITALIA Dichiara che la macchina Complete installation manual for the Kolver DOCK05 Cables and connectors. It provides information on safety and troubleshooting guides, replacement parts, component overview, safety precautions.

RAF38NS
Kolver RAF38NS
07.06.2026 4 pages

Place and date Signature DECLARATION OF CONFORMITY Error! No topic specified. KOLVER S.r.l. Via MARCO CORNER, 19 36016 THIENE (VI) ITALIA Declare that the new t Full user manual for the Kolver RAF38NS Power Tool. It provides detailed operation instructions and performance guidelines, installation steps, component replacement, usage procedures.

EDU 2AE/TOP
Kolver EDU 2AE/TOP
21.07.2026 27 pages

MANUAL EDU 2AE/TOP e EDU 2AE/TOP/TA Torque range: 0.2-50 Nm UIDENTIFICATION DATA OF THE MANUFACTURER KOLVER S.r.l. VIA M. CORNER, 19/21 36016 THIENE (VI) ITALIA Manual for installation and usage of the Kolver EDU 2AE/TOP Control Unit. It provides instructions for user settings, cleaning instructions, operating guidelines, device calibration.

ACE Screw Counter
Kolver ACE Screw Counter
07.07.2026 12 pages

Vers. 190416 DECLARATION OF CONFORMITY KOLVER S.r.l. VIA MARCO CORNER, 19/21 36016 THIENE (VI) ITALIA Declare that the new machine here described: ACE Screw Cou Operating handbook for the Kolver ACE Screw Counter Control Systems. This manual covers performance optimization, shutdown procedures, network configuration.

PLUTO Series
Kolver PLUTO Series
23.06.2026 22 pages

KOLVER S.r.l. VIA MARCO CORNER, 19/21 36016 THIENE (VI) ITALIA Dichiara che la macchina nuova qui descritta/ Declare that the new screwdriver here described: Av Owner’s guide for the Kolver PLUTO Series Power Screwdriver. This manual outlines support details, safety protocols, power requirements, maintenance.

Similar Manuals in the Test Equipment Category

ALT-9000
Viavi ALT-9000
29.03.2026 109 pages

ALT-9000 Radio Altimeter Test Set Operation Manual Operation instructions for the Viavi ALT-9000 Test Equipment. The manual highlights reset instructions, energy usage, technical troubleshooting.

DSG3000 Series
Rigol DSG3000 Series
14.07.2026 41 pages

RIGOL Service Guide DSG3000 Series RF Signal Generator Nov. 2013 RIGOL Technologies, Inc. Operating manual for the Rigol DSG3000 Series Security Sensors. The manual provides step-by-step instructions on user instructions, device features, device reset instructions, installation procedures.

ARC 1
Prizelawn ARC 1
05.04.2026 8 pages

Prizelawn Prizelawn Prizelawn Prizelawn® ARC ARC ARC ARC llll SPREADER CALIBRATOR OWNERS MANUAL Prizelawn ARC l Spreader Calibrator Comprehensive user handbook for the Prizelawn ARC 1 Test Equipment. This documentation explains configuration and security instructions, troubleshooting tips, setup tips.

PIWIS Tester III
Porsche PIWIS Tester III
06.06.2026 103 pages

FRONTCOVER PIWIS Tester III (PT3) Service Training Detailed operating instructions for the Porsche PIWIS Tester III Test Equipment. The documentation includes details on adjustment procedures, service instructions, testing procedures.