LuxCraft 2' Adirondack Glider Manuals

A. B. C. D. E. F. G. 2' Adirondack Glider Assembly Instructions Base Parts List 1- (A) Seat Assembly 1- (B) Back Assembly 2- (C) End Piece Assembly 2- (D) Leg & Armrest Assembly 4- (E) Glider Hangers with Bearing & Bolt Assembly 1- (F) Center Cross Piece - 2" x 3" x 173/4" 1- (G) Center Cross Piece - 2" x 3" x 201/4" 6- 5/16" x 41/2" Bolts 4- 5/16" x 4" Bolts 2- 5/16" x 31/4" Bolts 4- 5/16" x 3" Bolts 8- 21/2" Screws 16- 5/16" Nuts 16- Washers Hardware List INSTRUCTIONS: *Always match numbers/letters printed on each individual piece. (1 to 1, 2 to 2, A to A, B to B, etc.) Step 1 - To assemble glider base, attach center cross pieces (2" x 3" x 201/4" and 2" x 3" x 173/4") to end piece assembly. *Match numbers. Put four 41/2" bolts in top and four 4" bolts in bottom. Secure with washers and nuts. (Insert 4" bolt from bottom up.) Step 2 - Remove one washer and nut from each end of glider arm assembly. Attach one end of glider hanger assembly to each pre-drilled hole in end piece assembly. Fasten with washer and nut. Assembled bottom base ready for leg and glider hanger assemblies. 0 1 2 3 4 5 6 7 INCH continued on back