max mobility Thumb Throttle Button Manuals
1 pdf manual(s) max mobility Thumb Throttle Button for free download (Document Types: Instructions)
max mobility Thumb Throttle Button Instructions [PDF] (2 pages)
- Identifier: id-1339464
- Brand: max mobility
- Device: Thumb Throttle Button Wheelchair
- Type: PDF
- Key Aspects: Storage and Care Recommendations, Device Specifications Overview, Operational Mode Explanations
- UPD Date: 19.03.2026
- Source File: 1388294.pdf
- Pages: 2
- Description: User handbook for the max mobility Thumb Throttle Button.
![mobility
max
®
Thumb Throttle Button Instructions (continued)
Refer to the SmartDrive User’s Manual prior to use for further instruction on how to operate the SmartDrive.
Also, heed all warnings and cautions outlined in that manual.
Button Operation/Activation
The thumb throttle buttons are used to activate the power assist without having to perform a push. This is done by pressing [with the
0.9 lbs (4 N) minimal needed force] and holdin](https://cdn3.sc-journal.com/images/pdf-pages/1388/1388294/2.png)
Click to expand and read text
mobility max ® Thumb Throttle Button Instructions [sold separately] Rigid Frame Mount The two (2) SmartDrive thumb throttle buttons are easily mounted to each side of the wheelchair frame to allow for easy pressing without having to remove your hands from the handrims. 1. Wrap the velcro loop around the rubber backing of the button then around the side tubing of the wheelchair; feed the skinny end of the velcro through the slot in the wider end and pull tightly before laying down on its mating surface. Be sure the blue LED is pointing up and the cables that come out of each button run towards the back of the wheelchair (Fig A). NOTE: If the chair has screw-down seat upholstery, loosen the screws and feed the velcro strap under the metal bar (then retighten screws) to allow for closer positioning of the buttons to the handrims. 2. The cable can be pulled apart to the desired split location [preferably in the rear of the seat] and any extra cable can be managed under the cushion. Use the provided velcro strips to strap down the button cables to the upholstery. Be sure the cables do not stick out and will not get caught in the spokes of the wheelchair (Fig. B). Place the cushion over the cable to further secure the cable. 3. When the connector is not connected to the SmartDrive, it can be magnetically connected to the provided metal holder (Fig. C). Position the metal hold between the front and back parts of the clamp, feeding the top screw through the hole in the holder. To prevent rattle, tighten the top screw of the clamp completely before tightening the bottom screw. 4. The position and orientation outlined in the Adaptive Clamp Mounting Instructions are critical to the proper function of Smart- Drive and must be heeded. Refer to that instruction to make sure the clamp is oriented correctly. NOTE: Parts shown may differ slightly from your SmartDrive. Rev. MX2 BP-A Folding Frame Mount The two (2) SmartDrive buttons are easily mounted to each side of the frame of the wheelchair to allow for easy pressing without having to remove your hands from the handrims. 1. Wrap the velcro loop around the rubber backing of the button then around the side tubing of the wheelchair; feed the skinny end of the velcro through the slot in the wider end and pull tightly before laying down on its mating surface. Be sure the blue LED is pointing up and the cables that come out of each button run towards the back of the wheelchair (Fig. D). Fig. A Fig. B Fig. C Fig. D Fig. E 2. The cable can be pulled apart to the desired split location (preferably in the rear of the seat) and any extra cable can be routed at the rear of the seat. Use the provided tie-straps to route the cables along the frame tubes and out of the rear of the wheelchair. Be sure the cables do not stick out and will not get caught in the spokes of the wheelchair (Fig. E). 3. When not in use the cable can be left to dangle out the back. Be sure to leave enough slack to allow the cables to fold up with the wheelchair when the chair is collapsed.
Thumb Throttle Button: Related Instructions
User’s Manual 5425 crossings boulevard antioch, tn 37013 usa p: 800.637.2980 f: 888.411.9027 Informational videos available at www.max-mobility.com max mobili Complete instruction guide for the max mobility SmartDrive MX2+ Wheelchair. The documentation guides users through setup and hardware components, detailing setup, regulatory notices, error handling.
mobility max ® Thumb Throttle Button Instructions [sold separately] Rigid Frame Mount The two (2) SmartDrive thumb throttle buttons are easily mounted to each Essential instructions for the max mobility Thumb Throttle Button Wheelchair. The document presents device instructions, dimensions and layout, repair references.
Folder Adaptor Bar Mounting Instructions Folder Adaptor Set-Up The attachment hardware for folding frame wheelchairs is an adjustable length adaptor bar that at Product operation guide for the max mobility Folder Adaptor Bar Wheelchair. The document details configuration and software updates, maintenance guidelines, installation procedures, user settings.
User’s Manual 5425 crossings boulevard antioch, tn 37013 usa p: 800.637.2980 f: 888.411.9027 Informational videos available at www.max-mobility.com max mobili Official user handbook for the max mobility PushTracker 1 Fitness Trackers. This manual explains device features, service procedures, interface navigation.
It is STRONGLY recommended to contact MAX Mobility directly for service if you live inside the U.S. and your device is still under warranty! User’s Manual max Quick start guide for the max mobility SDMX2-DUM Wheelchair. It offers guidance for setup and regulatory notices, energy usage, safety information.
mobility max ® Axle Clamp Mounting Instructions NOTE: Refer to the separate directions provided for a folding frame wheelchair. CAUTION: The front and back of Comprehensive setup guide for the max mobility SmartDrive Wheelchair. This reference includes performance details, usage recommendations, maintenance guidelines.
Similar Manuals in the Wheelchair Category
For use by - Bariatric users at hospitals or nursing homes Max 325 kg XXL-Rehab Transporter Use User manual Removable and swing away armrest Adjustable backrest Technical instruction manual for the Cobi Rehab XXL-Rehab Farm Equipment. The guide focuses on maintenance guidelines, service contacts, support details, usage procedures.
DELUXE FOLDING ALUMINIUM TRANSIT WHEELCHAIR WITH RUNNING HANDBRAKES ZT-600-601 AE HBW ( 20” WIDE SEAT) USER MANUAL USER MANUAL Unit 1B, Albion Works, Moor St Complete usage guide for the Z-Tec ZT-600-601 Wheelchair. The guide covers usage and device instructions, testing procedures, calibration steps.
USE & CARE MANUAL • This manual is a comprehensive step-by-step user instruction guide for the Q’Pod Wheelchair Securement System. • Make sure to read, Maintenance and service manual for the Q'STRAINT Q'POD Wheelchair. The manual describes service instructions, technical guidelines, daily usage.
DK Kan med fordel anvendes til: - Bariatriske brugere. - Hjemmet. - Plejecentre. - Venteværelser. UK Ideal use for: - Bariatric users. - Home. - Care centres. Owner’s manual for the Cobi Rehab XXL-Rehab Indoor Furnishing. It outlines the setup and technical specifications, device operation tips, network setup, technical guidelines.