MaxiiNet Vi3103 Manuals

Application Drawings Vi3103 L2 Drop and Insert 30W PoE+ 3-Port Switch User’s Manual DO NOT OPEN RISK OF ELECTRIC SHOCK CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Installation (Powered by PoE) The Smart Choice for Transmission Solutions www.vigitron.com Important Safety Warning a) Port-1 (PoE-In) Connection: - Connect Port 1 of Vi3103 to the PoE switch or a high power PoE source using a standard Cat5/6 cable of maximum 100m in length. This port can receive up to 30W PoE and data 10/100Mbps. b) Port-2 & 3 (PoE-Out) Connection: Ports 2 and 3 can be used to either connect an IP camera or to port 1 of another Vi3103. Use a standard Cat5/6 cable of maximum 100m in length to connect the IP camera. Ports 2 and 3 can each provide up to 30W of PoE power when powered by an external power supply. When no power supply is used, the Vi3103 can deliver up to 30W shared between ports 2 and 3. - Read these instructions. - Keep these instructions. - Heed all warnings. - Follow all instructions. - Do not use this apparatus near water. - Clean only with a dry cloth. - Install in accordance with the manufacturer’s instructions. - This installation should be made by a qualified service person and should conform to all local codes. - DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring. - To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture, dripping or splashing. - No objects filled with liquids, such as vases, shall be placed on Vigitron equipment. - DO NOT install the unit in a place where the operating ambient tempera ture exceeds 75° C. - Make sure that the external power supply output voltage is in the recom mended range. - Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat. - Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. - Only use attachments/accessories specified by the manufacturer. - Unplug this apparatus during lightning storms or when unused for long periods of time. - Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. - The power plug and the PoE input cable are used as the disconnect device and shall remain readily WARNING! - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus. WARNING! - This apparatus is a Class I product. This product must be connected to a mains socket outlet through an AC to DC Power supply. WARNING! - The mains plug is used as the disconnect device and shall remain readily operable. 328 ft. (100m) Vi3103 PoE Switch PoE Camera 328 ft. (100m) Data + PoE 328 ft. (100m) PoE Camera Data + 30W PoE Data + PoE PoE Camera PoE Camera Vi3103 Vi3103 328 ft. (100m) Data NVR 328 ft. (100m) Data + PoE 328 ft. (100m) Data + PoE The Vi3103 is a 3-port Layer 2 Ethernet and PoE switch providing drop and insert capability for connecting several IP devices along a single cable run. The Vi3103 provides a cost effective method for increasing distances beyond the standard Ethernet limit of 328 feet (100m). Multiple units can be cascaded to provide up to nine IP cameras to be connected to a single network switch port over distances of up 3,000 feet (909m). For small systems the Vi3103's Layer 2 network capability can eliminate the need for network switchs saving costs and rack space. It also can significantly decrease network switch costs by increasing the port capacity of the switch. As a mini network switch, the Vi3103 avoids the potentials for transmission collisions by complying with IEEE standards. It is an easy and quick solution to add an extra camera without requiring to have a new home-run cable. The Vi3103 can be powered by PoE or a local power source. Additional power up to 30W can be added at any point along the cable run where power outlets are available and provide the ability to power IP cameras up to 30W. A total of 8 IP addresses can be accessed on a single cable run eliminating the need for network switches. Vi3103 allows for the transmission of two cameras over a single camera run or adding a new camera close to an existing camera. Vi1120 328 ft. (100m) Vi3103 Network Switch 328 ft. (100m) PoE Camera Data Data + 30W PoE Vi3103 can provide 30W PoE on port 2 and 30W PoE on port 3 using Vi1120 external power supply. PoE Switches MaxiiNet™ 328 ft. (100m) Data + 30W PoE PoE Camera PoE Camera 328 ft. (100m) Data + 30W PoE Vi1120