Microdigital MDC-7220WDN-30 Manuals

P/N 3690-0144P FEATURES SPECIFICATION MDC-7220WDN-30 WDR IR INDOOR DOME CAMERA USER’S MANUAL CODE DESCRIPTION PACKING LIST Manual Service Monitor Cable Mounting Screw Opener Key UTC Remote Controller [Option] Remote Controller USER INFORMATION CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE. REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC- ING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsi- bly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other com- mercial wastes for disposal. CAUTION IR LED -30 Built-in IR LED IR LED UTC MDC-xxx0 - DC 12V POWER SOURCE DC 12V UTC Remote Control DAY / NIGHT FILTER & MECHANISM WDN TRUE DAY / NIGHT (ICR-IR Cut Filter Removable) DAY / NIGHT DC Auto Iris Lens FILTER CHANGE LENS VARIFOCAL VARIFOCAL • Any changes or modifications in construction of this device which are not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. • This installation should be made by a qualified service person and should abide by all local codes. � Warning PRECAUTIONS • Do not install the camera in ex- treme temperature conditions. Only use the camera in the temperature ranges of the specification. Be especially careful to provide ventilation when operating under high temperatures. • Do not install or use the camera in an environment where the humidity is high. It can cause the image quality to be poor. • Do not install the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly. • Do not touch the front lens of the camera. This is one of the most important parts of the camera. Be careful not to leave fingerprints or dirts on the lens cover. • Do not drop the camera and protect it from physical shocks. It can cause malfunctions to occur. • Never keep the camera pointed directly at strong light. It can damage the Image Sensor. • Do not expose the camera to radioactivity. If exposed to radioactivity the Image Sensor will fail. • Do not expose the camera to rain or spill beverage on it. If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the elec- tronic components. • Do not expose the camera to radioactivity. If exposed to radioactivity the Image Sensor will fail. Ignoring this information may result in material loss and/or serious personal injuries including death. Indicates “Never Allowed.” Ignoring this information may result in material loss and/or a slight injuries. Indicates “No Disas- sembling.” Caution ���������������������������������������� ���������������������������������������� Installation Circumstance ���������������������������������������������������������������� ��������������������������������������������������������� NOTE • Exposure to a spotlight or an object emitting strong light may cause smear or blooming. • Ensure that the power source complies with normal specifications before supplying it to the camera. • Power supply (Adaptor : DC12V). - To avoid fire or shock hazard, must use a UL listed power supply. • Monitor Impedance. - Set the impedance switch to 75 ohm standard position. - When monitor is set to high impedance mode, the picture becomes blurred. In this case, just check the position of the monitor impedance switch. • 1/3" 960H Double Scan High Sensitivity CCD • Varifocal 2.8~12.0mm Lens • ICR (True Day & Night) • Color 700 TV Lines, BW 800 TV Lines • Wide Dynamic Range, Adaptive Tone Reproduction (ATR-Ex) • 2D+3D Noise Reduction, HLC, DIS, Privacy Mask, Intelligent Motion Detection • Intelligent Object Detection • 30 units of IR LEDs • OSD Menu Control over UTC • 12VDC Model no. MDC-7220WDN-30 Image Sensor 1/3" 960H Double Scan High Sensitivity CCD Signal System NTSC PAL Scanning Frequency(H) 15,734KHz(H) 15,625KHz(H) Scanning Frequency(V) 59.94Hz(V) 50.00Hz(V) Total Pixel 1020(H) x 508(V) 1020(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Horizontal Resolution Color 700 TV Lines, BW 800 TV Lines Video Output Level Composite 1.0Vp-p(75Ω load) S/N Ratio More than 52dB (AGC off) Lens Mount Varifocal 2.8~12.0mm Auto Iris Lens, ICR (True Day & Night) Min. Illumination 0 Lux (IR LED ON) IR LED 30 units of IR LEDs Shutter Speed 1/60sec.~1/100000sec.(60Hz) 1/50sec.~1/100000sec.(50Hz) Exposure Auto / Shutter PRI / Manual Lens DC / Video / Manual Gain Control On / Off (Max 30dB) Digital Slow Shutter Man x2~x512 / Off Brightness 1 ~ 15 Steps WDR On / Off, Wide Dynamic Range BLC On / Off Day & Night Day / Night / Auto / Ext White Balance ATW / One Push / Indoor / Outdoor / Manual / Auto Chroma Low / Mid / High Image HLC / DNR / HR / Mirror / Sharpness / Effect / Freeze / E.Zoom (Max x2~x32) DNR Off / Manual / Auto HR 1~7 Steps / Off Privacy Mask 16 Positions / Off Motion Detection 3 Positions / Off Object Detection On / Off Special Sync / Phase / DIS / Defect Detection / Scene Mode / Comm DIS On / Off Scene Mode User / Normal / Traffic / Back Light / Day&Night / Casino Multi Language English / Chinese / Korean / Japanese OSD OSD Control over Coaxial Cable by MDR-x490, x690, x900 or UTC Remote Controller with 3rd Party DVR Operating Temperature (-)10℃ ~ (+)50℃ Operating Humidity 95% RH max Standard CE, FCC Power Consumption 12VDC ± 10%, 360mA WDR Dual Scan