Panasonic WJND400 - NETWORK DISK RECORDER Installation Manual

please read these instructions carefully and save this manual for future use. Network Disk Recorder Installation Guide Model No. WJ-ND400 1 2 3 4 5 6 7 8 9 ND400_Basic.book 1 ページ ２００８年４月８日　火曜日　午後３時５９分 ...

within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magni- tude to constitute a risk of electric shock to persons. CAUTION CAUTION: Before attempting to connect or operate this product, please read the label on the bottom. The exclamation point within an equilateral triangle is intended t ...

found in the unit. You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identifi- cation in the event of theft. This Class A digital apparatus complies with Canadian ICES- 003. NOTE: This equipment has been tested and found to comply with the lim ...

System Requirements for a PC ............................................................................................ ...

Pin Assignments ........................................................................................................................................ 32 Connectivit ...

is possible to connect up to 64 cameras over a network. Also, it is possible to access and operate the recorder via a network from the web browser on a computer (hereafter PC). A maximum of 16 PCs can be connected (via a network). • The network settings for the PC need to be done to do settings and operations from ...

* Microsoft® Internet Explorer® 6.0 SP2 is required when using Microsoft® Windows® XP Professional SP2 or Microsoft® Windows® XP Home Edition SP2. • Adobe Reader is a trademark or registered trademark of Adobe Systems Incorporated in the USA and other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and Direct X are trademar ...

qualified service personnel or system installers. z Do not operate the unit beyond their its specified temperature, humidity, or power source ratings. Use the unit at temperatures between +5 ºC - +45 ºC {41 ºF - 113 ºF} and where the humidity is between 5 % - 90 %. The input power source for NTSC model is 120 V AC 60 Hz, for PAL model is 220 V - 240 V AC 50 Hz. Performance and lifetime o ...

Refer to the indication label placed on the surface of the unit as to the indications of equipment classification and power source, etc. z Handle the unit with care. Do not strike or shake, as this may damage the unit. z Do not strike or give a strong shock to the unit. It may cause damage or allow water to enter the unit. z Place the unit horizontally on a level surface. Do not place the unit in an upright position. When stacking mul ...

(1) Error indicator [ERROR] Blinks when errors or problems with the recorder's operation occur. (2) Alarm indicator [ALARM] Refer to the Operating Instructions (PDF file) for more information about alarms. (3) Alarm suspension indicator [ALARM SUSPEND] Refer to the Operating Instructions (PDF file) for more information about alarm suspension. (4) Buzzer stop button [BUZZER STOP] Use to turn off the buzzer aft ...

12 HDD status indicator (left side) Shows the operating status of the HDDs. (7) Key hole Use to open and close the front cover. Keep the key in a safe place. (8) Maintenance port Use for service when connected directly to a PC. Normally, it is not used. Note: • Use a straight cable to connect a PC directly to the maintenance port. (9) Recording indicator [REC] (10) Timer indicator [TIMER] (11) Operate indicato ...

13 (1) USE button [USE] Used when adding or replacing an HDD or changing the operating mode of the HDD. (2) HDD unit HDD in special canister. Add and replace HDDs by using the LCD on the front panel. Refer to page 45 for details. Contact your dealer for information on purchasing and replacing HDDs. (3) HDD status indicator [STS] Shows the operating status of the HDDs. (4) HDD access indicator [A/F] Indicates the ...

14 (5) HDD bay slots Up to 9 HDD can be installed (one HDD unit is installed at the factory). Note: • Limiting factors for the RAID5/RAID6 mode. (6) RAID mode switch [RAID] Switches the HDD operational mode (Single, RAID5, or RAID6). The settings become effective after setting the HDD operation mode with the [RAID] switch and turning on the power while holding down the [USE] button to boot up. (7) Removal knob ...

15 (1) Handle for Maintenance Loosen the 5 screws indicated by the triangles and grip these handles to pull off the panel when replacing the fan or doing other maintenance work. (2) Alarm/Control connector [ALARM/ CONTROL], D-Sub 25 pin Use to connect alarm devices (buzzers or indicators), external devices, control switches controlled by the recorder. (3) Alarm connector [ALARM], D-sub 25 pin Use to connect alar ...

Outline of Functions The recorder can record high-definition images (mega pixel camera images) in SXGA (1280 x 960) JPEG four times that of the existing VGA (640 x 480). This makes it possible to record a wide angle of view and to zoom in without fuzziness to check things. You can install up to 9 HDDs to record high-quality images for long periods of time. Plus, you can add up to 5 extension units. Replacement is Easy You can in ...

17 The RAID function makes it possible to improve the HDD's tolerance to errors. This product is equipped with the RAID6 mode that can recover image data when two HDDs fail, in addition to the RAID5 mode that can recover image data (RAID6 has two sets of error correcting code data). This prevents loss of recorded image data on large volume HDDs (refer to the Setup Instructions (PDF file). Note: • To use the RAID5 mode you need to con ...

18 High through put is achieved by separating the camera port and the client PC port. In addition to acquiring extremely stable images, you can connect a maximum of 64 cameras and 16 client PCs, depending on your network. Recording Camera images from network cameras are recorded on the recorder. One Network Disk Recorder can record images from a maximum of 64 cameras. JPEG, M-JPEG, and MPEG-4 images are supported. Playback Images recor ...

19 Event operations include the following. • Start recording images Recording is done according to the recording duration and rate settings on the settings menu. The images from a camera before an event occurs can be recorded and linked to the event (pre- record event). • Display alarm messages A pop-up screen appears to indicate an event has occurred. • Alarm indicator blinks Alarm indicator on the front of the recorder blinks. ...

20 The recorder and cameras connected to it can be operated from a PC on the network. Enabled functions When monitoring images from a camera with pan and tilt function. The recorder has two network security functions. Limit access with user authentication/host authentication Turn on the user and host authentication to limit users that can access the recorder. Limit access by changing HTTP ports Illegal access from port scanning is prev ...