Milwaukee 1001-1 Manuals

4 pdf manual(s) Milwaukee 1001-1 for free download (Document Types: Operator's manual)

Milwaukee 1001-1 Operator's manual [PDF] (21 pages)

  • Identifier: id-569220
  • Brand: Milwaukee
  • Device: 1001-1 Drill
  • Type: PDF
  • Key Aspects: End-of-Life Handling and Disposal, Hardware Setup Instructions, Safety Recommendations and Warnings
  • UPD Date: 23.07.2026
  • Source File: 556711.pdf
  • Pages: 21
  • Description: Step-by-step guide for the Milwaukee 1001-1.
Pages Preview:
  • 2 3 GENERAL SAFETY RULES — FOR ALL POWER TOOLS WORK AREA SAFETY ELECTRICAL SAFETY PERSONAL SAFETY WARNING READ ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury. The term
  • 4 5 Specifi cations FUNCTIONAL DESCRIPTION Cat. No. (RAD KIT) 1001-1 (3002-1) 1007-1 (***) 1101-1 (3102-1) 1107-1 (3107-1) 1107-6 (3107-6) 1250-1 (***) No Load RPM 0-600 0-600 500 0-500 0-500 0-1000 RAD * RPM lo 0-400 hi 0-900 lo 0-400 hi 0-900 lo 0-335 hi 0-750 lo 0-335 hi 0-750 lo 0-335 hi 0-750 lo 0-665 hi 0-1500 Flat boring bit 1-1/2
  • 6 7 The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire con- nected to the tool's grounding system and must never be attached to an electrically “live” terminal. Your tool must be plugged into an appropri- ate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those
  • 8 9 WARNING TOOL ASSEMBLY To reduce the risk of injury, always unplug tool before attaching or removing accessories or making adjustments. Use only specifi cally recommended accessories. Others may be hazardous. Removing and Replacing Quik-Lok® Cords MILWAUKEE's exclusive Quik-Lok® Cords provide instant fi eld replacement or sub- stitution. Fig. 1 1. To remove the Quik-Lok® Cord, turn the cord nut 1/4 turn to the left and pull it out. 2. To replace th
Document Preview & Text Transcription (Main Page)
Click to expand and read text
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DEL OPERADOR. OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. No de Cat. 1001-1 1007-1 1101-1 1107-6 1107-1 1250-1 3102-1 3102-6 3002-1 3107-1 3107-6 48-06-2871 48-06-2860 HEAVY-DUTY, REVERSING, 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADRO DE 13 mm (1/2") CON EMPUNADURA EN “D” HEAVY-DUTY, RIGHT ANGLE, REVERSING 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES, COUDÉ-AD 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADROS EN ANGULOS RECTOS, DE 13 mm (1/2") CON EMPUNADURA EN “D” RIGHT ANGLE DRIVE UNIT UNITÉ COUDÉE ANGLE DROIT CABEZAL PARA TRANSMISSION DE POTENCIA EN ANGULO RECTO 33° ANGLE DRIVE UNIT RENVOI D’ANGLE DE 33° UNIDAD IMPULSORA DE ANGULO DE 33°

Milwaukee 1001-1 Operator's manual [PDF] (15 pages)

  • Identifier: id-569221
  • Brand: Milwaukee
  • Device: 1001-1 Power Tool
  • Type: PDF
  • Key Aspects: Advanced Configuration Methods, Error Code Explanations, Information on Regular Maintenance
  • UPD Date: 29.07.2026
  • Source File: 556712.pdf
  • Pages: 15
  • Description: Complete service manual for the Milwaukee 1001-1.
Pages Preview:
  • 2 3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY WARNING READ ALL SAFETY WARNINGS AND INSTRUCTIONS. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference The term
  • 4 5 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. Refer to the table shown to determine the required minimum wire size. The smaller the gauge numbe
  • 6 7 forward reverse Installing 30
Document Preview & Text Transcription (Main Page)
Click to expand and read text
OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OPERADOR. Cat. No. No de Cat. 1001-1 1007-1 1101-1 1107-6 1107-1 1250-1 3102-1 3102-6 3002-1 3107-1 3107-6 48-06-2871 48-06-2860 HEAVY-DUTY, REVERSING, 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADRO DE 13 mm (1/2") CON EMPUNADURA EN “D” HEAVY-DUTY, RIGHT ANGLE, REVERSING 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES, COUDÉ-AD 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADROS EN ANGULOS RECTOS, DE 13 mm (1/2") CON EMPUNADURA EN “D” RIGHT ANGLE DRIVE UNIT UNITÉ COUDÉE ANGLE DROIT CABEZAL PARA TRANSMISSION DE POTENCIA EN ANGULO RECTO 33° ANGLE DRIVE UNIT RENVOI D’ANGLE DE 33° UNIDAD IMPULSORA DE ANGULO DE 33°

Milwaukee 1001-1 Operator's manual [PDF] (15 pages)

  • Identifier: id-569222
  • Brand: Milwaukee
  • Device: 1001-1 Power Tool
  • Type: PDF
  • Key Aspects: Glossary of Technical Terms, Environmental Factors and Restrictions, Product Performance Metrics
  • UPD Date: 08.07.2026
  • Source File: 556713.pdf
  • Pages: 15
  • Description: Complete device guide for the Milwaukee 1001-1.
Pages Preview:
  • 2 3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmos- pheres, such as in the presence of fl ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose co
  • 4 5 Fig. B Fig. C Fig. A GROUNDING WARNING Improperly connecting the grounding wire can result in the risk of elec- tric shock. Check with a qualifi ed electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the cord or plug is damaged. If damaged, have it repaired by a MILWAUKEE service facility before use. If the p
  • 6 7 Installing 30
  • 8 9 APPLICATIONS Selecting Bits When selecting a bit, use the right type for your job. For best performance, always use sharp bits. Drilling in Wood, Composition Materials and Plastic When drilling in wood, composition materials and plastic, start the drill slowly, gradually increasing speed as you drill. Use low speeds for plastics with a low melting point. NOTE: Keep the speed low enough to prevent burning the bit. Drilling in Metal When drilling in meta
Document Preview & Text Transcription (Main Page)
Click to expand and read text
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OPERADOR. OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Catalog No. No de Cat. 1001-1 1007-1 1101-1 1107-6 1107-1 1250-1 3102-1 3102-6 3002-1 3107-1 3107-6 48-06-2871 48-06-2860 HEAVY-DUTY, REVERSING, 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADRO DE 13 mm (1/2") CON EMPU- NADURA EN “D” HEAVY-DUTY, RIGHT ANGLE, REVERSING 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES, COUDÉ-AD 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADROS EN ANGULOS RECTOS, DE 13 mm (1/2") CON EMPUNADURA EN “D” RIGHT ANGLE DRIVE UNIT UNITÉ COUDÉE ANGLE DROIT CABEZAL PARA TRANSMISSION DE POTENCIA EN ANGULO RECTO 33° ANGLE DRIVE UNIT RENVOI D’ANGLE DE 33° UNIDAD IMPULSORA DE ANGULO DE 33°

Milwaukee 1001-1 Operator's manual [PDF] (28 pages)

  • Identifier: id-2133480
  • Brand: Milwaukee
  • Device: 1001-1 Drills
  • Type: PDF
  • Key Aspects: Best Practices for Everyday Use, Pre-Installation Safety Requirements, Emergency Shutdown Procedures
  • UPD Date: 13.08.2026
  • Source File: 2154157.pdf
  • Pages: 28
  • Description: Manual for installation and usage of the Milwaukee 1001-1.
Pages Preview:
  • page 2 GENERAL SAFETY RULES — FOR ALL POWER TOOLS WORK AREA SAFETY ELECTRICAL SAFETY PERSONAL SAFETY POWER TOOL USE AND CARE SERVICE 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
  • page 3 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 2. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. 3. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. 4. Keep hands away fro
  • page 4 2 3 4 1 1. Handle 2. Trigger 3. Nameplate 4. Extension 5. Side handle 6. Keyed chuck 7. Side handle socket 8. Forward/Reverse switch 9. Quik-Lok® cord (Cat. No. 1007-1 and 1107-1) 10. Ring clamp 11. Right angle drive unit 12. Clamp 13. Auxiliary side handle 14. 30
  • page 5 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge exten- sion cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. Refer to the table shown to determine the required minimum wire size. The smaller the gauge
Document Preview & Text Transcription (Main Page)
Click to expand and read text
OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OPERADOR. HEAVY-DUTY, REVERSING, 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADRO DE 13 mm (1/2") CON EMPUNADURA EN “D” HEAVY-DUTY, RIGHT ANGLE, REVERSING 1/2" D-HANDLE DRILL EXTRA ROBUSTE PERCEUSES, COUDÉ-AD 13 mm (1/2") ROTATION RÉVERSIBLE, POIGÉE EN ÉNTRIER HEAVY-DUTY, REVERSIBLES, TALADROS EN ANGULOS RECTOS, DE 13 mm (1/2") CON EMPUNADURA EN “D” RIGHT ANGLE DRIVE UNIT UNITÉ COUDÉE ANGLE DROIT CABEZAL PARA TRANSMISSION DE POTENCIA EN ANGULO RECTO 33° ANGLE DRIVE UNIT RENVOI D’ANGLE DE 33° UNIDAD IMPULSORA DE ANGULO DE 33° Catalog No. No de Cat. Catálogo No. 1001-1 1007-1 1101-1 1107-6 1107-1 1250-1 3102-1 3102-6 3002-1 3107-1 3107-6 48-06-2871 48-06-2860

1001-1: Related Instructions

M18 FPM
Milwaukee M18 FPM
14.05.2026 8 pages

Cat. No. ������� M18™ FUEL™ MUD MIXER WITH ��0° HANDLE OPERATOR'S MANUAL To reduce the risk of injury, user must read and understand oper Device user manual for the Milwaukee M18 FPM Mixer. The document guides users through software updates, startup procedures, usage tips, product specifications.

2646-20
Milwaukee 2646-20
22.05.2026 11 pages

M18™ CORDLESS GREASE GUN PISTOLET GRAISSEUR SANS FIL M18™ PISTOLA DE GRASA INALÁMBRICA M18™ Cat. No. No de cat. 2646-20 OPERATOR'S MANUAL MANUEL de L'UTI General instruction manual for the Milwaukee 2646-20 Tools. The manual provides technical details on user preferences, safety precautions, system setup, performance guidelines.

AG21-180 E
Milwaukee AG21-180 E
09.04.2026 53 pages

AG 21-180 E AG 21-230 E AGV 21-230 E AGV 21-230 GE AGV 21-230 GEX Instructions for use Gebrauchsanleitung Instruction d’utilisation Istruzioni d’uso Instruc User documentation for the Milwaukee AG21-180 E Power Tool. It offers details on network configuration, safety protocols, replacement parts, installation support.

M18 CID
Milwaukee M18 CID
28.06.2026 35 pages

Original instructions Originalbetriebsanleitung Notice originale Istruzioni originali Manual original Oorspronkelijke gebruiksaanwijzing Original brugsanvisning Complete device guide for the Milwaukee M18 CID Power Screwdriver. It contains information on menu navigation, operating guidelines, technical guidelines, operation.

Magnum 6497
Milwaukee Magnum 6497
02.07.2026 18 pages

10" MAGNUM® SLIDE COMPOUND MITER SAW SCIE À ONGLETS COMBINÉE COULISSANTE MAGNUM® 254 mm (10") SIERRA ANGULAR DE DISCOS DE CORTE COMPUESTO MAGNUM®, DE 254 m Device setup guide for the Milwaukee Magnum 6497 Saw. It explains configuration options and device reset instructions, installation, basic operation, support details.

CD97
Milwaukee CD97
06.08.2026 1 pages

INSTRUCTION MANUAL � CD97 TDS Tester www.milwaukeeinst.com OPERATING • Remove the protection cap. • Turn the CD97 on with the ON/OFF switch located on t Owner’s guide for the Milwaukee CD97 Test Equipment. This documentation highlights features and control functions, internal layout, setup guidelines.

Similar Manuals in the Drill, Drills, Power Tool Category

DA6300
Makita DA6300
18.07.2026 3 pages

Parts Breakdown DA6300 Page 1 of 3 2/8/2008 Quick reference guide for the Makita DA6300 Drill. This documentation explains configuration and device safety checks, system parameters, usage procedures.

6013B
Makita 6013B
12.04.2026 36 pages

GB Drill Instruction Manual F Perceuse Manuel d’instructions D Bohrmaschine Betriebsanleitung I Trapano Istruzioni per l’uso NL Boormachine Gebruiksaanwijzi Operating manual for the Makita 6013B Drill. It offers guidance on software updates, safety, configuration options, maintenance guidelines.

3107-1
Milwaukee 3107-1
02.04.2026 7 pages

Milwaukee Tool Heavy-Duty, Reversing 1/2” D-Handle Drill Model Number: 3107 (kit) Safety Instructions GENERAL SAFETY RULES 1. Keep your work area clean and we User operation guide for the Milwaukee 3107-1 Drill. This manual outlines maintenance guidelines, device features, product maintenance, operating instructions.

1001-1
Milwaukee 1001-1
30.04.2026 15 pages

OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE Product operation manual for the Milwaukee 1001-1 Power Tool. This guide provides technical guidance on application scenarios, basic operation, firmware updates, troubleshooting.