Movado BOLD MOTION Manuals

1 MOVADO MOTION SMARTWATCH FAQ

a MOVADO BOLD MOTION USER GUIDE GETTING STARTED Watch overview The Movado BOLD Motion has a button (1) on the left side of the case that controls the watch functions. Press it once to change the watch view. The views display in the following order: analog, progress tracker status, digital time, digital battery status, Bluetooth status. Analog view is displayed by default, and the watch returns to analog view after five seconds of inactivity. The crown (2) is located on the right side of the case and is used only to set the time. NOTE: Do not operate the watch button or pull the crown out while the watch is wet or underwater. Setting the time 1. Gently pull the crown out to position 2; the seconds hand stops moving. 2. Rotate the crown in either direction to move the hour and minute hands to the desired time. 3. Push the crown back in to position 1; the seconds hand restarts. Charging the watch The watch contains two batteries. One battery controls the digital functions of the watch and can be recharged. The other battery controls the analog functions of the watch and is not rechargeable. Before you set up the watch, charge it for at least four hours. When the battery that controls digital functions is fully charged, it should last five to seven days with minimal use. The first time you charge the watch, it might not vibrate or illuminate. When you connect the watch to power after the first time, the watch vibrates twice and the lights between 3 and 9 o’clock fully illuminate and then fade, to show the current digital battery status. When all seven lights illuminate again and stop pulsing, the watch is fully charged. Each time you need to charge your watch, disconnect the charger from power and thoroughly wipe the charger and watch contact pins with a soft, lint-free cloth before connecting the charger to power and then to the watch. If needed, you may dampen the cloth with a small amount of isopropyl rubbing alcohol. Never use soap or any chemicals other than isopropyl rubbing alcohol to clean the contact pins on the watch or charger. Make sure that the isopropyl alcohol does not come into THIS FILE PREPARED BY: MOVADO GROUP ADVERTISING DEPARTMENT Project Name: BOLD Motion Online User Guide Brand: MOVADO Job No.: MO-16-478 Size/Color/Screen: 4C Bleed: N/A Trim: 8.25” x 11” Live: Creative Director: Richard Tassone Copy Director: Debbie Gibson Art Director: Carolyn Schwartz Production Manager: Pat Carr Supplier: Imtech E. GRINBERG: MARY LEACH: RICH TASSONE: ART DIRECTOR: COPY DIRECTOR: ACC’T MANAGER: PRODUCTION MGR: BRAND PRESIDENT: MARKETING DEPT.: VISUAL MERCH.: SALES DEPT.: TECHNICAL: TIM MICHINO: OTHER: INITIAL DATE MGI APPROVAL STAMP INITIAL DATE

1 MOVADO BOLD MOTION USER GUIDE GETTING STARTED Watch overview The Movado BOLD Motion has a button (1) on the left side of the case that controls the watch functions. Press it once to change the watch view. The views display in the following order: analog, digital time, progress tracker status, digital battery status, Bluetooth status. Analog view is displayed by default, and the watch returns to analog view after five seconds of inactivity. The crown (2) is located on the right side of the case and is used only to set the time. NOTE: Do not operate the watch button or pull the crown out while the watch is wet or underwater. Setting the time 1. Gently pull the crown out to position 2; the seconds hand stops moving. 2. Rotate the crown in either direction to move the hour and minute hands to the desired time. 3. Push the crown back in to position 1; the seconds hand restarts. Charging the watch The watch contains two batteries. One battery controls the digital functions of the watch and can be recharged. The other battery controls the analog functions of the watch and is not rechargeable. Before you set up the watch, charge it for at least four hours. When the battery that controls digital functions is fully charged, it should last five to seven days with minimal use. The first time you charge the watch, it might not vibrate or illuminate. When you connect the watch to power after the first time, the watch vibrates twice and the lights between 3 and 9 o’clock fully illuminate and then fade, to show the current digital battery status. When all seven lights illuminate again and stop pulsing, the watch is fully charged. Each time you need to charge your watch, disconnect the charger from power and thoroughly wipe the charger and watch contact pins with a soft, lint-free cloth before connecting the charger to power and then to the watch. If needed, you may dampen the cloth with a small amount of isopropyl rubbing alcohol. Never use soap or any chemicals other than isopropyl rubbing alcohol to clean the contact pins on the watch or charger. Make sure that the isopropyl alcohol does not come into contact with the watch strap. Replacement of either battery—for the analog or the digital functions—requires service from a Movado Authorized Service Center. For locations, visit www. mgiservice.com/movado. Never open the watch or attempt to replace the batteries yourself; opening the watch case will void your warranty. Movado Group assumes responsibility only for service performed at its Authorized Service Centers.

USING YOUR WATCH