mr. steam SMART/ONE Manuals

SMART/ONE BOX CONTENTS 1. SMART/ONE CONTROL 5. ANCHORS (2) 9. INSTALLATION AND OPERATION 2. CONTROL CABLE 6. TEMPLATE INSTRUCTIONS 3. TUBE OF SILICONE 7. WHITE DECAL 10. STEAM HEAD 4. SCREWS (2) 11. ESCUTCHEON /1/1r-St.arri. SMART/ONE CONTROL INSTALLATION & OPERATION INSTRUCTIONS 1. LOCATING THE CONTROL INSIDE OR OUTSIDE THE STEAMBATH ENCLOSURE: The SMART/ONEcontrol is designed to be installed inside or outside the steambath enclosure accord- ing to personal preference. It is recommended that the SMART/ONE control is located about four to five feet above the floor. The control should be located away from direct shower spray and must be kept away from hot water pipingand steam piping. 2. DETERMINE IF THE INSTALLATION OF AN ELECTRICAL BOX IS REQUIRED. The SMART/ONE control operates on a 24 VAC low voltage signal. Check your local building codes to determine if the use of an electrical box is required. 3. The SMART/ONE control cannot be used tocether with any other controls including the SMART/ REMOTE, SMARTriVVO, and SMART/PLUS. 4. A CAUTION: Do not route the SMART/ONE control cable inside conduit together with power lines or close to hot wader or steam piping. Doing so may result in a malfunctioning control. 1111 � is, 5tiN1 N! Lifestyle itt , t. P! MR. STEAMO IS A DIVISION OF SUSSMAN-AUTOMATIC CORPORATION 43-20 34th Street, Long Island City, NY 11101 (718) 937-4500 • (800) 767-8326 • FAX (718) 472-3526 WESTERN REGIONAL OFFICE: Sussman Automatic of California, Inc., 6050 West Jefferson Blvd., Los Angeles, CA 90016 (8C0) 727-8326 • FAX (310) 815-1878 httol/www.mrsteam.com PUP t0e303 � ..tAiNl CC