mr. steam SMART/ONE Installation & Operation Instructions

1. SMART/ONE CONTROL 5. ANCHORS (2) 9. INSTALLATION AND OPERATION 2. CONTROL CABLE 6. TEMPLATE INSTRUCTIONS 3. TUBE OF SILICONE 7. WHITE DECAL 10. STEAM HEAD 4. SCREWS (2) 11. ESCUTCHEON /1/1r-St.arri. SMART/ONE CONTROL INSTALLATION & OPERATION INSTRUCTIONS 1. LOCATING THE CONTROL INSIDE OR OUTSIDE THE STEAMBATH ENCLOSURE: The SMART/ON ...

FOR SMART/ONE CONTROL A. Remove template peel-oft paper and attach the template to the wall in desired location. Drill and cutout as shown. Be exact. Clean all burrs and dust. TEMPLATE B. Route the control cable from the wall cutout to the steam generator. Locate the end of the cable that has the single black con ...

TO SMART/ONE CONTROL REMOVE STEP 7 PAPER LINER ALIGN DECAL STEP 8 A. Align decal with recessed area on control. B. Lightly apply decal to surface. C. Check decal alignment. DECAL 1- E5 z r - EXPOSE ADHESIVE SURFACE ON BACK OF SMART/ONE CONTROL Remove paper liner from back of SMART/ONE control to expose adhesive surface. Disca ...

SIVIART/ONE OPERATION 1) CONTROL " ON" Depress and release the "ON" button. Steam will begin flowing out of the steam head after approximately five minutes. Steam will continue flowing for (60) minutes. The butler logo lights up in the "ON" mode. 2) CONTROL "OFF" Depress and release the "OFF" button and the steam will stop flowing. ...