MuxLab 500757 Manuals

© MuxLab Inc. 2017 Luxul Ethernet Switch Quick Setup Guide For MuxLab AV over IP Devices

© MuxLab Inc. 94-000816-A 8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5 Tel: (514) 905-0588 Fax: (514) 905-0589 Toll Free (North America): (877) 689-5228 E-mail: [email protected] URL: www.muxlab.com Specifications Environment HDMI (up to 1080p @ 30Hz) Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI. Control Controllable via the Ethernet port. HDMI standard HDMI ver. 1.3, HDCP 1.1 Connectors Note: Cables not included. One (1) HDMI receptacle. One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair. One (1) 3.5mm jack for IR emitter/sensor. One (1) DB9 Serial Port for RS232. Six (6) DIP Switches for device ID addressing. Maximum Distance On HDMI (per side): 6.6ft (2m) On Cat5e/6: 330ft (100m) Latency Less than 500ms Compression Video: H.264 fully compliant with ISO/IEC 14496-10 high profile and level 4.1, up to 1920x1080p @ 30Hz Audio: MPEG Network Requirement Compliant with the full IEEE 802.3-2002 specifications (100BaseTX). Network Bandwidth Video: 18Mbps, Audio: 256Kbps IR Frequency 38KHz to 56KHz RJ45 Pin Configuration Use EIA/TIA 568A or 586B straight-through wiring. RJ45 Link Pin 1 (R) Pin 2 (T) Pin 3 (R) Pin 6 (T) Pin 4 (R) Pin 5 (T) Pin 7 (R) Pin 8 (T) Power Source This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately. PoE Standard IEEE 802.3af Power Consumption Transmitter: 4.5W Receiver: 2.5W Temperature Operating: 0° to 40°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing Enclosure Type Metal enclosure. Dimensions 4.4” x 4.6” x 1.0” (111mm x 120mm x 25mm) Weight 1.5lbs (0.7kg) Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0 Warranty 2 years Order Information 500757 HDMI over IP H.264 PoE Extender Kit 500757-TX HDMI over IP H.264 PoE Extender TX 500757-RX HDMI over IP H.264 PoE Extender RX Accessories (These items are sold separately) 500920 Rackmount Transceiver Chassis 16-Port 500917 Wall Mount Transceiver Bracket Kit 500998 IR Emitter, and 500994 IR Sensor 500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade HDMI over IP H.264 PoE Extender Kit 500757 Quick Installation Guide Overview The HDMI over IP H.264 PoE Extender Kit allows HDMI equipment to be connected up to 330ft. (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same local Ethernet network. The Transmitter (500757-TX) and Receiver (500757-RX) may be sold separately, and support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The kit comes with one (1) Transmitter and one (1) Receiver. IR Emitter and IR Sensor, if required, may be purchased separately for IR based remote control applications. For the point-to-multipoint and multipoint-to-multipoint configurations the Ethernet Switch must have Gigabit ports, DHCP Server capability and additionally support the IGMP communication protocol for the multipoint-to-multipoint case. MuxLab recommends using the Cisco SG300 Series Managed Switches. The MuxLab ProDigital Network Controller (500811) is available to simplify the configuration and utilization of the 500757 and other MuxLab IP based products via an Ethernet web interface. Applications Applications include commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems.