National Instruments NI HDD-8265 Manuals

INSTALLATION GUIDE NI HDD-8265 Battery Pack Accessory This guide explains how to install the NI HDD-8265 Battery Pack Accessory. Complete the following steps to install the battery pack accessory: 1. Remove the NI HDD-8265 chassis cover by unscrewing the rear thumbscrew and two side screws (one on each side of the chassis), as shown in Figures 1 and 2, and sliding the cover toward the rear of the chassis. A #2 Phillips screwdriver (not included in the kit) is recommended to remove each side screw. Figure 1. Removing the Rear Thumbscrew Figure 2. Removing the Side Screw all-guides.c om