Ness SDI Manuals

4, 8 & 16 Channel Standalone Digital Video Recorder Ness IQ-Series 4, 8 & 16 Channel 960H & SDI Model User Manual Standalone Digital Video Recorder Model DVR’s

SDI Box Camera Quick Guide 00P5SH061ZXSEA3 The quick guide is for quick installing and connecting the SDI Box Camera. For details, please refer to the camera’s User Manual. System Configuration Connector Definition Single Board Dual Board DIP Switch Setting The table below shows the definition of each DIP Switch on the Camera’s Rear Plate. Setting Pin Definition ON OFF 1 TV System NTSC PAL 2 Resolution 720P 1080P 3 Frame Rate 50/60 25/30 4 Reserved - - 5 Reserved - - 6 BNC ON OFF Please kindly notice that while BNC is on, there will be no signal from SDI output Item Definition Remark A PWR Power connection indication (green light) B AUTO IRIS Connector Auto Iris Lens connector C RESET Reset D SDI OUTPUT SDI signal output E ↑ / ↓ / ← / → / ENTER OSD control key Single Board DC12V Power connector ＋ AC 24V: AC_IN 1 DC 12V: DC12V AC 24V: GND DC 12V: GND F Dual Board DC12V/AC24V － AC 24V: AC_IN 2 DC 12V: DC12V G VIDEO BNC output H DIP Switch TV system/ Resolution/ Frame Rate Setup/BNC 1 ALARM_GND 5 T- 2 ALARM_IN+ 6 T+ 3 ALARM_OUT- 7 R- I Alarm I/O 4 ALARM_OUT+ 8 R+ www.ness.com.au Recommended settings turn oFF switches 1-6 for correct operation. installeRs Please note: dipswitch 6 must be oFF to enable sdi output