Ness IQ Operation & User’s Manual

Standalone Digital Video Recorder Ness IQ-Series 4, 8 & 16 Channel 960H & SDI Model User Manual Standalone Digital Video Recorder Model DVR’s ...

This manual covers the following DVR’s 4 Channel 960H (104-527), 8 Channel 960H (104 4 Channel SDI (104-452), 8 Channel SDI (104 FCC Compliance Statement Notice to Users: This equipment has been tested and found to comply with 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gener ...

Cautions � This product has free voltages (100V ~ 2 � This product uses a Lithium battery. � To avoid any risk of explosion, do not replace the battery � Dispose of used batteries according to the manufacturer’s instructions. � This equipment and all communication wirings are intended for indoor use only. � To reduce the risk of fire or electric shock WEEE(Waste Electrical and Electronic Equipment) Im ...

12. Servicing � Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel. 13. Damage Requiring Service � Unplug this equipment from the wall outlet and refer servicing to qualified ① When the power-supply cord or the plug has been damaged ② If liquid is spilled or objects have fallen into the equipment ③ If the equipment has been exposed to rain or water ④ I ...

The List of Configuration DVR Set CD Containing Manual / CMS CD Remote Controller Manual Screws HDD Brackets Rack Bracket (Rack mount models only) Data Cable Power Cable Power Adapter Series 960H & SDI DVR The List of Configuration 4 / 8 Channel 960H & (104- 4 channel SDI (104 16 Channel 960H (104 8 / 16 Channel SDI (104-441 & 104 Manual / CMS CD Page 5 -527, 104-528) 4 channel SDI (104-452) 960H (104-529) & 441 & ...

Operation � Power Off � Do not turn DVR off, or plug off the power adapter while permanent damage to the equipment. Please click power after DVR is shut down completely. It is safe to wait for 5 seconds before turning the power on again. � Do not turn DVR off, or plug off the power adapter while external hard disk and the like) in use. Otherwise, it may cause permanent damage to the equipment. Make sure that ...

1. Product Features 1.1 Unpacking � This equipment is an electronic appliance, so it should be handled with special care. � After unpacking, please check if all the following items are - DVR Main body - 4 / 8 Channel 960H (104-527, 104- - 16 Channel 960H (104-529) & 8 / 16 Channel SDI (104 6.67A) - Remote Control With 2 AAA batteries - Installation CD (CMS Software & User’s Manual) 1.2 Service � If there is ...

1.3 System Connection Diagram 4 / 8 Series 960H & SDI DVR System Connection Diagram 4 / 8 Channel 960H (104-527 / 104-528) & 4 Channel SDI (104-452) Page 8 ...

8 / 16 Channel SDI (104 Series 960H & SDI DVR 16 channel 960H (104-529) & 8 / 16 Channel SDI (104-441 / 104-442) DVR Page 9 ...

Installation 1.4 Hard disk and DVD-RW Installation 1.4.1 SATA Port � When installing HDDs, make sure to connect from SATA 1 Port. � 4 / 8 Channel 960H & 4 Channel SDI - Main substrate of this DVR has two SATA port: it is indicated as SATA � 16 Channel 960H & 8 / 16 Channel SDI - Main substrate of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5. - Please mount DVD-RW at the SATA ...

CAUTION INSTALL HARD DISK AFTER DVR POWER IS OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HARD DISK. TO TURN OFF DVR, PLEASE CLICK (���� ) SETUP> SUPPLY AGAIN. CAUTION � FOR INSTALLATION/ADDITION/REPLACEMENT/REMOVAL OF HDD (DVD OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HDD (DVD � INSTALLATION/ADDITION/MOVING/REPLACEMENT FORMATTING. OTHERWISE, DVR WON ABNORMALLY. PLEASE FOLLOW THE BEL ...

1.5 Connector Wiring 1.5.1 Video-In/Loop Out Connections � Connect a camera to ‘VIDEO IN’. � Assure the ‘VIDEO IN’ and ‘LOOP OUT’ connections are connected properly, not oppositely. NOTE Only the 16 channel 960H and 8 / 16 channel SDI 1.5.2 Monitor Connections (Video Out, VGA and � Video Out - Use with the CCTV monitor. - Connect BNC cable between CCTV monitor and � VGA - Use with a computer mon ...

CAUTION HDMI CONNECTION MAY NOT BE COMPATIBLE WITH CERTAIN OUTPUT DEVICE. VIDEO NOISE MAY OCCUR DEPENDING ON THE TYPE OF HDMI CABLE USED. MAKE SURE TO USE AN HDMI CAUTION BLACK SCREEN WILL APPEAR IF THE MONITOR DOEST NOT SUPPORT THE SELECTED RESOLUTION. UNLESS USER PRESS DURING BLACK SCREEN, SYSTEM WILL AUTOMATICALLY GO BACK TO THE PREVIOUS RESOLUTION IN 15 SECONDS. 1.5.4 Audio Connections � Connect an audio devi ...

1.5.11 USB Connections � There are up to four identical USB ports in front and in rear. It is possible to connect a USB memory stick to archive data or a mouse to control the device. 1.5.12 RS-232 Connections � This port is not in use for users. Do not connect any devices CAUTION WHEN USING THE RS232 SERIAL PORT, USERS MUST REQUEST FOR ASSISTANT TO QUALIFIED TECHNICAL PERSON OR SERVICE REPRESENTATIVE. 1.5.13 ...

2. Input Device and Screen Icons 2.1 Key and LEDs 4 / 8 channel 960H & 4 channel SDI KEYS Icons Direction Keys ▲▼◄► • Control Pan/Tilt rotation of up/down/left/right in PTZ mode • Up/Down/Left/Right on screen cursor control MENU • Enter the Main Menu (Setup mode) DISPLAY • Select 1/4/9/16 channel display ARCHIVE • Copy video data into the external storage device FREEZE • Screen freeze mode on/of ...

MENU • Enter the Main Menu (Setup mode) PLAY.PAUSE • Viewing from the last one minute) • • Zoom SEARCH • Video search mode on/off • Zoom REW • Fast backward playback (changes up to x128 with each • Focus Near in PTZ mode FF • Fast forward playback (changes up to x128 with each press) • Focus Far in PTZ mode BACKWARD • Frame backward playback • Save Preset in PTZ mode FORWARD • Frame forwar ...

2.4 Using a Remote Controller � Usage of a remote controller is same as the front panel � Follow the procedure below when using the remote controller for multi DVRs. ① Check System ID (e.g., between 1 and 255) of the DVR that wish to use. - (SETUP>SYSTEM>Information>Status>System ID). ② Holding up the remote controller to face towards the DVR and press the System ID numbers one by one, while pressing ID but ...

2.6 Screen Icon Icon Description Continuous recording mode Event recording mode (Motion) Event recording mode (Alarm In) In recording PTZ registration / PTZ mode Setup in HDD No Overwrite mode (HDD Full) Series 960H & SDI DVR Description Icon Description Continuous recording mode In Audio recording 16 CMS access indication/ No. of accesses (up to 16) In channel sequencing Lock PTZ registration / PTZ mode Setup in H ...

3. Setup 3.1 Login / Logout � At the default setting of DVR, user has to input the password to enter the set up menu. � Please press SETUP key to enter the setup menu and the following screen will appear. � In order to use all functions and privileges, log � Default Password is “1111”. � At Setup>System>Account, Administrator should set a user rights depending on each user separately in “Login Setti ...

3.2 SYSTEM 3.2.1 Information � Please click (���� ) SYSTEM>Information and the Site Description � Decide on a name of DVR. � Please click (���� ) keyboard icon on Site Description frame and the following virtual keyboard will appear. � Please click (���� ) desired letters (characters) on the virtual keyboard to input. ① Use to erase one character every time. ② Use to erase ...