Oriental motor BXM230 Manuals

1 Introduction „ „Before using the product Only qualified personnel of electrical and mechanical engineering should work with the product. Use the product correctly after thoroughly reading the section "Safety precautions." In addition, be sure to observe the contents described in warning, caution, and note in this manual. The product described in this document has been designed and manufactured to be incorporated in general industrial equipment. Do not use for any other purpose. Oriental Motor Co., Ltd. is not responsible for any damage caused through failure to observe this warning. „ „Related operating manuals Operating manuals for this product are listed below. z z BXⅡ Series OPERATING MANUAL Motor Edition (this document) This manual explains installation methods of the motor and load, and others. z z BXⅡ Series OPERATING MANUAL Driver Edition This manual explains the functions as well as the installation/connection methods and others for the driver. z z BXⅡ Series USER MANUAL This manual explains the functions, installation/connection methods, operating methods of the motor and driver as well as detailed information for using the product. This manual does not come with the product. For details, contact your nearest Oriental Motor sales office or download from Oriental Motor Website Download Page. Safety precautions The precautions described below are intended to ensure the safe and correct use of the product, and to prevent the user and other personnel from exposure to the risk of injury. Use the product only after carefully reading and fully understanding these instructions. WARNING Handling the product without observing the instructions that accompany a "WARNING" symbol may result in serious injury or death. CAUTION Handling the product without observing the instructions that accompany a “CAUTION” symbol may result in injury or property damage. Note The items under this heading contain important handling instructions that the user should observe to ensure safe use of the product. [Description of graphic symbols] : Indicates "prohibited" actions that must not be performed. : Indicates "compulsory" actions that must be performed. WARNING •• Do not use the product in explosive or corrosive environments, in the presence of flammable gases, locations subjected to splashing water, or near combustibles. Doing so may result in fire, electrical shock, or injury. •• Do not transport, install, connect or inspect the product while the power is supplied. Always turn off the power before carrying out these operations. This may result in electric shock or malfunction. •• Do not use the standard type (without electromagnetic brake) in a vertical application. If the driver protective function is activated, the motor will stop and the moving part will drop, thereby causing injury or damage to equipment. •• Do not use the brake mechanism of the electromagnetic brake motor as a safety brake. It is intended to hold the moving part and motor positions. Using it as a safety brake may result in injury or damage to equipment. •• Do not forcibly bend, pull or pinch the cable. Doing so may result in fire or electric shock. •• Do not machine or modify the motor cable or connection cable. Doing so may result in electric shock or fire. WARNING •• Do not touch the motor or driver when conducting the insulation resistance measurement or dielectric strength test. Accidental contact may result in electric shock. •• Do not disassemble or modify the motor, gearhead and driver. Doing so may result in electric shock, injury, or damage to equipment. Refer all such internal inspections and repairs to the branch or sales office from which you purchased the product. •• Only qualified and educated personnel should be allowed to perform installation, connection, operation and inspection/troubleshooting of the product. Handling by unqualified and uneducated personnel may result in fire, electric shock, injury, or damage to equipment. •• The motor and driver are ClassⅠequipment. When installing the motor and driver, ground their Protective Earth Terminals. Failure to do so may result in electric shock. •• Install the motor and driver inside an enclosure. Failure to do so may result in electric shock or injury. •• Securely connect the cables in accordance with the connection examples. Failure to do so may result in fire or electric shock. •• Be sure to observe the specified cable sizes. Use of unspecified cable sizes may result in fire. •• Use a motor, gearhead, driver, and regeneration resistor only in the specified combination. Failure to do so may result in fire, electric shock, or damage to equipment. •• Always turn off the power before performing maintenance/inspection. Failure to do so may result in electric shock. CAUTION •• Do not use the motor, gearhead, driver, or regeneration resistor in a state where the specification value is exceeded. Doing so may result in fire, electric shock, injury, or damage to equipment. •• Do not leave anything around the motor and driver that would obstruct ventilation. Doing so may result in damage to equipment. •• Do not move the product by holding the output shaft of the motor or the gearhead, or the motor cable. Doing so may result in injury. •• Do not touch the motor output shaft (key slot or pinion) with bare hands. Doing so may result in injury. •• When assembling the motor (pinion shaft) with the gearhead, exercise caution not to pinch your fingers or other parts of your body between the motor and gearhead. Injury may result. •• Do not touch the rotating part (output shaft) while operating the motor. Doing so may result in injury. •• Securely install the motor, gearhead and driver to their respective mounting plates. Inappropriate installation may cause the motor, gearhead or driver to detach and fall, resulting in injury or damage to equipment. •• Provide a cover over the rotating part (output shaft) of the motor or gearhead. Failure to do so may result in injury. •• When installing the motor or gearhead in equipment, exercise caution not to pinch your fingers or other parts of your body between the equipment and motor or gearhead. Injury may result. •• Securely install a load on the output shaft of the motor or gearhead. Inappropriate installation may result in injury. •• The motor surface temperature may exceed 70 °C (158 °F) even under normal operating conditions. If the operator is allowed to approach the motor in operation, attach a warning label in a conspicuous position as shown in the figure. Failure to do so may result in a skin burn(s). Warning label HM-5271 O P E R AT I N G M A N UA L Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures and safety precautions. •• Please read it thoroughly to ensure safe operation. •• Always keep the manual where it is readily available. Brushless Motor BXⅡ Series Motor Edition

HP-5124 Brushless Motor BXⅡ Series USER MANUAL Thank you for purchasing an Oriental Motor product. This Manual describes product handling procedures and safety precautions. •• Please read it thoroughly to ensure safe operation. •• Always keep the manual where it is readily available.