-
TF 500, TF 500E Systems
1
-
MANUAL NO. 5050-0420
2
-
TABLE OF CONTENTS
3
-
Use Of This Manual
6
-
25. VACUUM PICK SWITCH - Activates & deactivates
12
-
ANGLE BRACKET KIT
16
-
THERMOFLO CUBBY KIT
17
-
The Air Hose and Slide Rod must be positioned to
18
-
QUICKFIT NOZZLE ADAPTER
19
-
1. Install proper Nozzle into ThermoFlo Handpiece.
22
-
Timed Mode Of Operation
23
-
The ThermoFlo System Work Platform (PACE
24
-
Program Mode Of Operation
25
-
THERMOFLO REFLOW PROFILES
28
-
PROGRAM MODE PROFILE CONTROL CHART
29
-
Vacuum Cup Selection
36
-
Manual Mode of Operation
38
-
MANUAL MODE COMPONENT REMOVAL (CONT'D)
39
-
MANUAL MODE COMPONENT INSTALLATION
41
-
MANUAL MODE COMPONENT INSTALLATION (CONT'D)
43
-
Timed Mode of Operation
45
-
9. Hold the handpiece vertical to the PCB.
46
-
TIMED MODE COMPONENT REMOVAL (CONT'D)
47
-
7. If replacing a BGA component with the ThermoFlo
50
-
TIMED MODE COMPONENT INSTALLATION (CONT'D)
51
-
16. If using a Single Jet nozzle in a hand held
54
-
PROGRAM MODE COMPONENT REMOVAL (CONT'D)
57
-
PROGRAM MODE COMPONENT INSTALLATION
59
-
Entering/Editing A Profile
63
-
2. The Digital Readout will now display a stored
64
-
Entering/Editing A Profile (Cont'd)
65
-
6. "Lower Preheat Time" is now displayed. A number
66
-
10. "Top Preheat Temp" is now displayed. A number
68
-
16. "Soak Blower =" is now displayed. A number
70
-
22. "Lower Pump On? (or "Lower Pump Off?) is now
72
-
In Set-Up Mode you can:
77
-
4. Perform one of the following steps:
78
-
9. "Display is" (°C or °F) is now displayed.
80
-
10. "Delete Profiles ?" is now displayed.
81
-
Digital Readout Message Codes
83
