Panasonic CQ-VX220L Manuals

TILT CQ-VD5005W DIMMER DIM TUNE/TRACK MUTE SETUP SOURCE POWER VOL PUSH SEL AV1 IN OPEN CLOSE DIMMER IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER TILT TEXT CQ-VX220L In-dash 7”Widescreen Color LCD Monitor/DVD Receiver Monitor LCD en color de pantalla panorámica de 7”/receptor y DVD empotrado en el tablero de instrumentos Model: CQ-VX220L Operating Instructions Manual de Instrucciones ¡Please read these instructions carefully before using this product and keep this manual for future reference. ¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura. TEXT 1 2 CQ-VX220L English Safety Information Warning Observe the following warnings when using this unit. ❑The driver should neither watch the display nor operate the system while driving. Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or oper- ating the system. ❑Use the proper power supply. This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery system. ❑Protect the Disc Mechanism. Do not insert any foreign objects into the slot of this unit. ❑Do not disassemble or modify the unit. Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Service Center. ❑Do not use the unit when it is out of order. If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer. ❑Refer fuse replacement to qualified service per- sonnel. When the fuse blows out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualified service technician or service center. Incorrect replacement of the fuse may lead to smoke, fire, and damage to the product. Observe the following warnings when installing. ❑Disconnect the lead from the negative (–) battery terminal before installation. Wiring and installation with the negative (–) battery termi- nal connected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have specific procedures of battery terminal disconnection. FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHI- CLE AND PERSONAL INJURY OR DEATH. ❑Never use safety-related components for installa- tion, grounding, and other such functions. Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals, airbag, etc.) for wiring or fixing the product or its accessories. ❑Installing the product on the air bag cover or in a location where it interferes with airbag operation is prohibited. ❑Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if possible. ❑Never install the product in a location where it inter- feres with your field of vision. ❑Never have the power cord branched to supply other equipment with power. ❑After installation and wiring, you should check the normal operation of other electrical equipment. The continuation of their using in abnormal conditions may cause fire, electrical shock or a traffic accident. ❑In the case of installation to an airbag equipped car, confirm warnings and cautions of the vehicle manufacturer before installation. ❑Make sure the leads do not interfere with driving or getting in and out of the vehicle. ❑Insulate all exposed wires to prevent short circuit- ing. This pictograph intends to alert you to the pres- ence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death. ■Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. ■This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly. Warning This pictograph intends to alert you to the pres- ence of important operating instructions and installation instructions. Failure to heed the instructions may result in injury or material dam- age. Caution 2 3 CQ-VX220L English Caution Observe the following cautions when using this unit. ❑Keep the volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑Do not insert or allow your hand or fingers to be caught in the unit. To prevent injury, do not get your hand or fingers caught in moving parts or in the disc slot. Especially watch out for infants. ❑This unit is designed for use exclusively in auto- mobiles. ❑Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. ❑Do not expose the unit to direct sunlight or exces- sive heat. This will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit. ❑Do not use the product where it will be exposed to water, moisture, or dust. Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days. ❑Set the volume level to low enough before the AV1 IN connection is completed. Failing to observe this may damage your speakers and your hearing. Direct connection of the speaker/headphone output of an external device without any attenuator may distort sound or damage the connected external device. Observe the following cautions when installing. ❑Refer wiring and installation to qualified service personnel. Installation of this unit requires special skills and experi- ence. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. ❑Follow the instructions to install and wire the prod- uct. Not following the instructions to properly install and wire the product could cause an accident or fire. ❑Take care not to damage the leads. When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection. ❑Use the designated parts and tools for installation. Use the supplied or designated parts and appropriate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunc- tion or fire. ❑Do not block the air vent or the cooling plate of the unit. Blocking these parts will cause the interior of the unit to overheat and will result in fire or other damage. ❑Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. ❑Installation Angle The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details. ❑Wear gloves for safety. Make sure that wiring is completed before installation. ❑To prevent damage to the unit, do not connect the power connector until all the wiring is completed. ❑Do not connect more than one speaker to one set of speaker leads. (except for connecting to a tweeter) Caution • PLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR WIRING, INSTALLATION, AND USE OF THIS UNIT AND THE DEVICES TO BE CONNECTED.