Panasonic CQ-VX220L Operating Instructions Manual

TILT TEXT CQ-VX220L In-dash 7”Widescreen Color LCD Monitor/DVD Receiver Monitor LCD en color de pantalla panorámica de 7”/receptor y DVD empotrado en el tablero de instrumentos Model: CQ-VX220L Operating Instructions Manual de Instrucciones ¡Please read these instructions carefully before using this product and keep this manual for future reference. ¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura. TEXT

this unit. ❑The driver should neither watch the display nor operate the system while driving. Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or oper- ating the system. ❑Use the proper power supply. This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery system. ❑Protect the Disc Mechanism. Do not insert any foreign objects into the slot of this unit. ❑Do not disassemble or modify the unit. Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Service Center. ❑Do not use the unit when it is out of order. If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer. ❑Refer fuse replacement to qualified service per- sonnel. When the fuse blows out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualified service technician or service center. Incorrect replacement of the fuse may lead to smoke, fire, and damage to the product. Observe the following warnings when installing. ❑Disconnect the lead from the negative (–) battery terminal before installation. Wiring and installation with the negative (–) battery termi- nal connected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have specific procedures of battery terminal disconnection. FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHI- CLE AND PERSONAL INJURY OR DEATH. ❑Never use safety-related components for installa- tion, grounding, and other such functions. Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals, airbag, etc.) for wiring or fixing the product or its accessories. ❑Installing the product on the air bag cover or in a location where it interferes with airbag operation is prohibited. ❑Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if possible. ❑Never install the product in a location where it inter- feres with your field of vision. ❑Never have the power cord branched to supply other equipment with power. ❑After installation and wiring, you should check the normal operation of other electrical equipment. The continuation of their using in abnormal conditions may cause fire, electrical shock or a traffic accident. ❑In the case of installation to an airbag equipped car, confirm warnings and cautions of the vehicle manufacturer before installation. ❑Make sure the leads do not interfere with driving or getting in and out of the vehicle. ❑Insulate all exposed wires to prevent short circuit- ing. This pictograph intends to alert you to the pres- ence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death. ■Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. ■This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly. Warning This pictograph intends to alert you to the pres- ence of important operating instructions and installation instructions. Failure to heed the instructions may result in injury or material dam- age. Caution

this unit. ❑Keep the volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑Do not insert or allow your hand or fingers to be caught in the unit. To prevent injury, do not get your hand or fingers caught in moving parts or in the disc slot. Especially watch out for infants. ❑This unit is designed for use exclusively in auto- mobiles. ❑Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. ❑Do not expose the unit to direct sunlight or exces- sive heat. This will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit. ❑Do not use the product where it will be exposed to water, moisture, or dust. Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days. ❑Set the volume level to low enough before the AV1 IN connection is completed. Failing to observe this may damage your speakers and your hearing. Direct connection of the speaker/headphone output of an external device without any attenuator may distort sound or damage the connected external device. Observe the following cautions when installing. ❑Refer wiring and installation to qualified service personnel. Installation of this unit requires special skills and experi- ence. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. ❑Follow the instructions to install and wire the prod- uct. Not following the instructions to properly install and wire the product could cause an accident or fire. ❑Take care not to damage the leads. When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection. ❑Use the designated parts and tools for installation. Use the supplied or designated parts and appropriate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunc- tion or fire. ❑Do not block the air vent or the cooling plate of the unit. Blocking these parts will cause the interior of the unit to overheat and will result in fire or other damage. ❑Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. ❑Installation Angle The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details. ❑Wear gloves for safety. Make sure that wiring is completed before installation. ❑To prevent damage to the unit, do not connect the power connector until all the wiring is completed. ❑Do not connect more than one speaker to one set of speaker leads. (except for connecting to a tweeter) Caution • PLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR WIRING, INSTALLATION, AND USE OF THIS UNIT AND THE DEVICES TO BE CONNECTED.

Caution THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOUR- SELF. REFER SERVICING TO QUALIFIED PERSONNEL. This system is designed so that you cannot see moving pictures while you are driving. ¡Park your car in a safe place and pull the side brake (parking brake) lever before watching the monitor. ¡A rear monitor (option) displays moving pic- tures while driving. Note: ¡Be sure to connect the side brake (parking brake) connection lead. (a Installation Instructions)

Components 5. Installation Hardware (screws, cords, etc.) (a Installation Instructions) 4. Installation Instructions Qty.: 1 XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO 3. System Upgrade Guidebook Qty.: 1 XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO 2. Operating Instructions Qty.: 1 XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO 1. Main Unit (LCD monitor/DVD player) Qty.: 1 TILT CQ-VD5005W DIMMER DIM TUNE/TRACK MUTE SETUP SOURCE POWER VOL PUSH SEL AV1 IN OPEN CLOSE DIMMER IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER TILT TEXT CQ-VX220L Note: ¡The number in parenthesis underneath each accessory part name is the part number for maintenance and service. ¡Accessories and their parts numbers are subject to modification without prior notice due to improvements. Liquid Crystal Panel ¡Do not cause impact to the liquid crystal panel. ¡Usage temperature range: 0 °C to 40 °C {32 °F to 104 °F} When the temperature is very cold or very hot, the image may not appear clearly or may move slowly. Also, movement of the image may seem to be out of synchronization or the image quality may decline in such environments. Note that this is not a malfunction or problem. ¡In order to protect the liquid crystal panel, keep it out of direct sunlight while the unit is not in use. ¡Sudden changes in the temperature inside the car such as those which occur immediately after the car’s air conditioner or heater has been turned on may cause the inside of the liquid crystal panel to cloud over due to water vapor or it may cause condensation (droplets of water) to form and, as a result, the panel may not work properly. Do not use the unit while these symp- toms are in evidence but leave the unit standing for about an hour, and then resume or start use.

connector via a USB extension cable for iPod/iPhone (USB 2.0, not included), you can enjoy music/video files stored on the iPod/iPhone series in your car. ¡The USB connector is equipped. Connection of a USB memory (not included) to the USB connector allows users to enjoy MP3/WMA files stored on the USB memory in the car. Compatible USB devices ¡USB Mass Storage Class For details as to whether your USB memory/USB Audio is compatible with USB Mass Storage Class, please con- tact the USB memory/USB Audio manufacturer. ¡USB Standard Compatibility 1.1/2.0 Full Speed ¡File System FAT12/16/32 ¡Maximum current less than 500 mA ¡Capacity less than 4 GB (1 partition) Note: ¡The use of USB devices that contain data files other than MP3/WMA format is not recommended. ¡Audio playback may not be possible with some types of USB device connected. ¡Playback or display may not be possible depending on the type of USB device or the condition of the recording. ¡For video browsing of the iPod/iPhone, please use the optional Direct Cable for iPod with Video (CA- LDC100X) for connection with AV1 IN connector of this unit. (Do not connect with AV2 IN connector) (a Installation Instructions) ■Integration of the monitor, FM/AM radio, DVD Video/Video CD player and CD/MP3/DivX player ■Built-in AV Input/Output Terminals For more convenient connection and setup, all termi- nals are now provided on the unit itself. Note: ¡If a non-Panasonic product is connected to this unit, we do not guarantee the operation of the product. ■SQ (Sound Quality) You have 6 preset modes (Flat, Rock, Pop, Vocal, Jazz, Club). You can customize your setting for these and save them for instant recall. SQ3 (3-Band Sound Quality) Center frequency and level are adjustable in each of 3 bands. This lets you fine-tune sound quality for each genre to suit car-interior acoustics and your personal preferences. (a page 37) ■GUI (Graphic User Interface) GUI displays various indications with colorful sym- bols to enhance visibility, enjoyment, and operability. ■Disc type auto-detection The signal auto-detection function of this unit allows users to be free from selection between PAL and NTSC before use of your discs. (For output signal, set . (a page 38)) ■Touch Panel Operation Simply touch the screen lightly to operate virtually all functions. Easy-to-use menus and icons let you “touch and choose” what you want, so you can start using your system from the very first day. That also means that while you drive, you can concentrate on the road. ■DVD–R, DVD–RW Playback (a page 16, 48 for details) ¡Discs in the video recording (VR) format are unplayable. ■ID code 4-digit ID code for increased security. Fill in the ID code memo (a page 46). TV Type Panasonic welcomes you to our constantly growing family of electronic product owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family. Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are connected. ■No device is connected to this unit. a Basic operations only are covered by this book. ■Optional devices are connected to this unit. a Refer to the “System Upgrade Guidebook” in addition.

¢ Notes on Use................................................... 5 ¢ Components.................................................... 5 ¢ Features........................................................... 6 ¢ Preparation...................................... 8 First time power on, other settings, symbols used in this manual ¢ Name of Controls and Functions ................ 10 ¢ Anti-Theft System ......................................... 11 ¢ Touch Panel Operation Overview................ 12 ¢ General .......................................... 14 Power on/power off, display open/close, source selection, volume, mute, tilt angle, folding down the display temporarily ¢ Before Disc Playback..................... 16 ¢ Disc Player..................................... 18 ¢ Notes on MP3/DivX ....................................... 22 ¢ Radio.............................................. 24 ¢ USB - Audio Device Control ........ 26 ¢ USB - iPod Control ....................... 28 ¢ AV1/AV2 ......................................... 30 ¢ Settings ......................................... 32 Setup operation Basic setting, screen, sound, disc, radio ¢ About DivX VOD Content ............................. 40 ¢ Troubleshooting ........................... 41 ¢ Maintenance .................................................. 47 ¢ Notes on Discs.............................................. 48 ¢ Language Code List...................................... 49 ¢ Definition of Terms ....................................... 50 ¢ Specifications................................................ 51 English 2 Español 52

clock, ID code, input, other, memory clear (screen settings) (a page 36) dimmer, display, aspect (sound settings) (a page 37) SQ3, bass/treble, balance/fader (disc settings) (a page 38) audio language, subtitle language, menu language, video setting, audio setting, DivX registration (radio settings) (a page 39) FM setup Note: ¡Refer to “Settings” (a page 32) for further information about operations, settings, and others of the menu screen. Radio Disc Sound Screen Basic Setting You may need to set the following depending on the devices to be connected. AV1/AV2 (Camcorder, VCR, etc.) ¡Adjust . (a page 34) Input Other Settings When the power of this unit is turned on for the first time, the following screen appears. Perform the settings in accordance with the specifications of the car on which this unit is mounted. : sets to ON if your car has ACC position. : sets to OFF if your car has no ACC posi- tion. Note: ¡ For an ACC-equipped car, select ON. The following functions are available. ¡ The power is turned on automatically when inserting a disc. ¡ selection disables turning on the power of the main unit through the remote control (option). Off Off On First Time Power On Warning ¡When you connect external devices to this unit, be sure to connect the side brake connection lead (aInstallation Instructions). Caution ¡Be sure to select off when your car has no ACC position in the ignition switch. Failure to do this could cause the battery to go dead. OFF ACC IGN

more methods with the touch panel or remote control (option). This book explains such operations in tabular form as follows. Refer to the following for the pic- tographs located in the upper part of each table. Symbols used in this manual Disc Marks The following pictographs are used for the descriptions of disc operation. (a page 17-21) : DVD : VCD (Video CD) : CD : CD-Rs/RWs containing MP3 files : CD-Rs/RWs or DVD-Rs/RWs containing DivX files DivX DivX DivX MP3 MP3 MP3 CD CD CD VCD VCD VCD DVD DVD DVD Compatible types of disc The discs compatible with the targeted operation. Compatible Discs Compatible Discs Compatible Discs Disques compatibles Compatible Discs Compatible Discs Compatible Discs Discos compatibles Compatible Discs Operation on the Touch Panel You can use the touch panel to perform the targeted operation. If the operation is not executable with the touch panel, “––” is displayed. Operation on the Main Unit You can use the Main Unit to perform the targeted opera- tion. If the operation is not executable with the Main Unit, “––” is displayed.

TILT CQ-VD5005W DIMMER DIM TUNE/TRACK MUTE SETUP SOURCE POWER VOL PUSH SEL AV1 IN OPEN CLOSE DIMMER IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER TILT TEXT CQ-VX220L TILT CQ-VX220L DIMMER DIM TUNE/TRACK MUTE SETUP SOURCE POWER VOL PUSH SEL AV1 IN OPEN Disc slot w [VOL] (PUSH SEL) e [MUTE] t [SOURCE] (POWER) y [s] [d] (TUNE/TRACK) (Display Closed) (Display Raised) r [SETUP] Remote control sensor (for optional remote control) !0 [TILT] o [OPEN] (CLOSE) o [OPEN] (CLOSE) !0 [TILT] u [u] q [DIM] (DIMMER) q [DIM] (DIMMER) q w e [MUTE] r [SETUP] t y u [u] i o !0 [TILT] ¡Adjusts the monitor position. ¡Tilts the monitor forward temporarily. ¡Opens/closes the monitor. [OPEN] (CLOSE) ¡From line output of external audio/video device. (a Installation Instructions) AV1 IN ¡Ejects/reloads a disc. Note: ¡Do not insert a disc when the eject button [u] lights because a disc is already loaded. ¡Selects or searches for a track, file, sta- tion. ¡Fast forward/fast reverse. ¡Slow playback ([d]). [s] [d] (TUNE/TRACK) ¡Switches on/off the power. ¡Changes the modes such as sound and picture. [SOURCE] (POWER) ¡Shows the setup screen. ¡Mutes the sound temporarily. ¡Adjusts the sound volume. ¡Adjusts audio settings. [VOL] (PUSH SEL) ¡The screen brightness is toggled between the set level and maximum luminance. [DIM] (DIMMER) i AV1 IN Display

as forcible mounting without engaging the concave parts with the convex parts may cause trouble. ¡ Use caution not to damage the detection switch while mounting the face plate. Failure to observe this may cause trouble. ¡ Use caution not to apply excessive force to the removed face plate when the plate is carried or stored. Failure to observe this may cause trouble. ¡ This face plate is not waterproof. Do not expose it to water or excessive moisture. ¡ Do not remove the face plate while driving your car. ¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises high. Face Plate Removal Alarm This alarm sounds to warn you not to forget to remove the face plate before leaving your car. This function is activated when is set to ). (a page 35) On Security Alarm TILT CQ-VX220L DIMMER DIM TUNE/TRACK MUTE SETUP SOURCE POWER VOL PUSH SEL AV1 IN OPEN This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inopera- ble. Install the Face Plate q Engage the right and left concave parts (A) on the lower rear side of the face plate with the convex parts (B) of the main unit. w Raise and press the face plate toward the main unit until a click is heard while engaging (A) with (B). Removable face plate Remove the Face Plate q Switch off the power of the unit. w Hold the top and bottom of the center part of the face plate and pull it down toward you. e Pull the face plate toward you. r Place the face plate into the case and take it with you when you leave the car. w e (B) (B) (A) (A) q w Detection switch

The State of Operation Screen ❒Notes on the Touch Panel Before operation ¡Clean the surface of the touch panel. (a page 47) Operation ¡Use only your fingers to operate the touch panel. ¡Do not press the panel forcefully. ¡Do not scratch the panel with fingernails or any hard objects. ¡Do not use a pen or other sharp implements to operate the touch panel. ¡Do not bump the front panel. a Failure to observe the above may damage or break the glass on the surface of the touch panel. Example: DVD mode Note: ¡The following picture is partly darkened for explanation. ¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details. Prohibition Input is not possible because the user has attempted to perform an operation which is not supported by the disc contents. Displays the Source Selection Screen. Source Button Setup Button Displays the Setup Screen. Disc indicator (a page 17) (Lights when a disc is loaded) Clock time (a page 34) (Content varies with each source) Source Selection Screen appears. Touch desired source button. Touch to quit. Source Selection Screen Setup Screen Setup Screen appears. Select desired setting. Setup menu, (a page 32) Sound Button (a page 37) Aspect Button (a page 36) (only for video source) Press [SOURCE] to change to desired source. Press [SETUP] to let Setup Screen appear. Note: ¡The screen above appears when no external device is connected to this unit.

Note: ¡ Refer to the instructions of each source. ¡ To switch Operation Screen on, touch the center of touch panel. (Touch to cancel) ¡ If no operation takes place for more than 10 seconds when Operation Screen is ON, Operation Screen is turned off. Touch . Touch . Audio Source ❒CD/MP3/USB audio device/iPod audio Operation Screen List Screen Touch . Touch . ❒DVD ❒DivX Touch . Touch . Touch . Touch . Touch . Operation Screen 1 Operation Screen 2 Operation Screen 1 Operation Screen 2 List Screen Touch . Operation Screen List Screen Video Source ❒iPod video Example: CD mode

Display Open/Close Note: ¡When the display is opened or closed, a loud beep sounds three times. ¡If the unit stops halfway, press [OPEN] again to draw it all the way out. ¡Opening/closing the display can be done when the power is off. – [SOURCE] Power OFF : Preparation: Turn your car’s ignition key to the ACC or ON position. …… Touch/Press and hold for more than 2 seconds RADIO (AM/FM) (a page 24) (a page 18) (a page 26) (a page 30) iPod/USB AV1 (a page 30) AV2 (a System Upgrade Guidebook) Bluetooth (Audio/Phone) DVD (DVD/VCD (Video CD)/CD/MP3/DivX) Note: ¡If there is no external sources connected, AV1/AV2 mode can be set to skip. (a page 34) (a page 12) [SOURCE]

Operations – the monitor is opened automatically when turning ON ACC. – the monitor is not opened automatically. – – – [MUTE] [TILT] To raise the display, press again. Tilt Angle Folding Down the Display Temporarily [TILT] Mutes the sound. To cancel, press again. Mute Note: ¡Vertical angle (TILT) is saved in the memory, so when the display is drawn out next, it is automatically set at the angle and in the position adjusted before. ¡After adjusting its angle, also adjust the brightness as well. (a page 36) ¡The car model and installation conditions may impose some restrictions on the adjustment of the monitor's angle. Note: ¡Even when the unit power is off, you can fold down the display temporarily. Caution ¡Avoid physical shock to the monitor. ¡Do not place any object on the display, or subject it to undue force. ¡Do not move the display forcibly. ¡The monitor movable range may be limited by the type of car, the position where the display is mounted, etc. Warning ¡Do not touch the unit while the display is moving. Inserting hands, fingers or for- eign objects into the unit can cause injuries and damage to the unit. General Operations (continued) 1 5 default: Manual – q Up w Down w q Volume Note: ¡The sound level for each source is stored in memory. Setting range: 0 to 40, default: 18 Note: ¡ The volume level can be set independently for each source and each disc format. w Touch to adjust. Setting range: 1 to 5 default: 5 or –

Discs that can be Played Back ❒About DivX ¡DivX files recorded on CD-Rs/RWs and DVD-Rs/RWs are playable. Refer to “Notes on MP3/DivX” for further information. (a page 22) ❒Symbols used on jackets (Examples of such symbols include) ¡ : Number of subtitle languages ¡ : Number of audio tracks ¡ : Number of angles The numbers indicate the number of languages, tracks, angles, etc., recorded on the disc. Screen size (H:V aspect ratio) ¡ : 4:3 standard size ¡ : Letterbox (a page 38) ¡ 16:9 wide size : Playback in letterbox format on a standard screen (4:3). : Playback in (pan and scan) (a page 38) format on a standard screen (4:3). Note: ¡The size of the image that is displayed on the screen depends on the screen mode ( a page 36), and on the screen size for the content on the disc. ❒Region Management Information This product is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this product, this product does not play the disc. *2The Region number for this product is “4”. Aspect Pan & Scan PS 16:9 LB 16:9 LB 4:3 3 2 2 ❒Notes on DVD-Rs/RWs ¡Do not mix DVD-Video formatted data and other format- ted data on the same disc. ¡Discs in the video recording (VR) format are unplayable. ¡Unfinalized discs are unplayable. ¡Use disc-at-once recording for DVD-R DL (double-layer). ¡Some discs are unplayable depending on the disc itself, device, drive and software that are used for disc recording. ❒Discs not supported The following discs are not played back on this product. ¡DVD-Audio ¡DVD-ROM ¡DVD-RAM ¡DVD+R ¡DVD+RW ¡VSD ¡CVD ¡Blu-ray Disc ¡CD-G ¡CD-ROM (except MP3) ¡CD-RW (except MP3/DivX and CD-DA) ¡CD-R (except MP3/DivX and CD-DA) ¡SACD ¡Photo CD ¡CDV ¡Hybrid SACD (except CD-DA) ¡CD-EXTRA (audio-only playback possible) ¡DVDs with a region number other than “4”, or “ALL”* 2 ¡Playing back a photo CD disc with this unit could damage the data that is recorded on the disc. * 1 CD-DA : A general music CD format. Note: ¡Only discs with logos shown in the “Mark/logo” row of the table above are playable. ¡About CD-Rs and CD-RWs, refer to “Notes on CD- Rs/RWs, DVD-Rs/RWs”. (a page 48) ¡Some copy-protected music/video CDs are not playable. ¡Even if you play a dts DVD or a dts CD, analog sound can- not be reproduced. LPCM (CD-DA* 1), MP3 ❒Disc Type TEXT Recordable ReWritable DISC DVD VCD (Video CD) CD CD-R/RW Mark/logo Disc Size 12 cm Video Format NTSC / PAL Audio Format LPCM, MPEG1, MPEG2, Dolby Digital LPCM (CD-DA* 1), MPEG1, MPEG2 (SVCD) Region No. 4, ALL* 2 (IEC62107) 4 ALL 1 2 3 4 Playable Discs:

TILT TEXT CQ-VX220L 16 English 17 CQ-VX220L [u] (eject) lights. Disc Insert ¡The mode that supports the disc is selected, and play- back starts. When a disc is in the player, change to disc player mode (CD, MP3, DivX, DVD or VCD (Video CD)) and playback starts. Note: ¡Do not insert a disc when the eject button lights because a disc is already loaded. ¡The power will be turned on automatically when a disc is loaded. ¡You can play a disc even if the monitor is closed. ¡The sound may be interrupted for a few moments while the audio format is being identified. ¡The audio format is automatically identified. (a page 16) ¡When the menu screen appears, see “Chapter/title Selection” on page 20. DVD DVD DVD VCD VCD VCD CD CD CD MP3 MP3 MP3 DivX DivX DivX CH-C Disc Eject Press [u] to stop playback and eject the disc. (Press [u] again to reload the disc.) Note: ¡If you leave a disc in the slot for more than 30 seconds after its ejection, the disc will be automatically reloaded after a loud beep is heard three times. ¡Due to limitations of certain discs, some DVD and VCD (Video CD) discs may not operate as described in this manual. Refer to the disc jacket for further details. ¡This unit does not support DVD and VCD (Video CD) karaoke functions. DVD DVD DVD VCD VCD VCD CD CD CD MP3 MP3 MP3 DivX DivX DivX CH-C DVD DVD DVD VCD VCD VCD DivX DVD DVD DVD VCD VCD VCD CD MP3 DivX CH-C DVD DVD DVD VCD VCD VCD DivX ■ When a disc is in the player... Do not insert a disc when the eject button lights because a disc is already loaded. Printed side Disc Insert/Eject Caution ¡Do not use irregularly shaped discs. ¡Do not insert foreign object into the disc slot. ¡This unit does not support 8-cm disc. If you load such a disc, eject and remove the disc from the slot immediately. Caution ¡When the disc is inserted or ejected, to prevent disc scratches never exert any downward force on the disc.

TILT TEXT CQ-VX220L SOURCE 17 English Disc Player [SOURCE] [s] [d] q Touch “Source Button”. d w Touch (Disc) on the Source Selection Screen. Source Selection Press [SOURCE] to change to the desired mode. To switch Operation Screen ON, touch the center of touch panel. Random/repeat indicator Source Button Video Mode Display q Touch (folder name) to select a folder. , : scrolls up/down the file list by 1 page. , : scrolls up/down the file list by 1 line. w Touch (file name) to play. : Folder : MP3/DivX file Note: ¡[s] and [d] of the main unit can scroll up and down the file list by 1 page, respectively, too. ¡It is not possible to display the whole tree and file list in a folder. ¡The displayed contents on the touch panel vary with circumstances. Note: ¡Touch to change the display. (a page 13) CD MP3 Operation Buttons Audio Mode Display List (Folder/File/Track) Selection Operation Buttons Source Button Playing time Operation Buttons Title/text scroll Folder selection Current track (Example: MP3 mode) VCD (Video CD) Source Button Playing time Operation Buttons DivX Source Button Playing time DVD Source Button Playing time Operation Buttons Title/text scroll Source Button Playing time

* Touch panel symbols will change to indicate these current mode. , DivX DivX DivX MP3 MP3 MP3 CD CD CD VCD VCD VCD DVD DVD DVD DVD DVD DVD Track/file Selection Fast Forward/ Fast Reverse Note: ¡When playing a DVD, there are cases where it is not possible to return to the start of a chapter that spans 2 titles. DivX DivX DivX MP3 MP3 MP3 CD CD CD VCD VCD VCD DVD DVD DVD DivX DivX DivX VCD VCD VCD DVD DVD DVD The speeds of fast forward and fast reverse change incrementally in 4 steps every time the corresponding button is pressed. Folder Selection Title/text Scroll DivX DivX DivX MP3 MP3 MP3 DivX DivX DivX MP3 MP3 MP3 CD CD CD Stop DivX DivX DivX MP3 MP3 MP3 CD CD CD VCD VCD VCD DVD DVD DVD To resume playback, touch . Pause DivX DivX DivX MP3 MP3 MP3 CD CD CD VCD VCD VCD DVD DVD DVD Slow Playback VCD VCD VCD DVD DVD DVD Repeat Play DivX DivX DivX MP3 MP3 MP3 CD CD CD VCD VCD VCD DVD DVD DVD * * * * Repeat Play within the Current Folder DivX DivX DivX MP3 MP3 MP3 To resume playback, touch again or touch . Note: ¡Reverse slow playback is not possible. Scan Play CD CD CD Random Play DivX DivX DivX MP3 MP3 MP3 CD CD CD Random Play within the Current Folder DivX DivX DivX MP3 MP3 MP3 – – – [d] Next track/file Beginning of the current track/file Previous track/file (Touch/press twice.) [s] Fast forward Release to resume playback. Fast reverse Release to resume playback. Next folder Scrolls the title/text once Previous folder – ¡Touch/press and hold in the pause mode. Playback is at about 1/3 normal speed. To resume normal playback, touch . To cancel, touch again. To cancel, touch and hold for more than 2 seconds again. – To cancel, touch again. – To cancel, touch again. – To cancel, touch and hold again. – – [d] [s] [d]

To switch Operation Screen ON, touch the center of touch panel. Note: ¡If no operation is performed for 8 seconds after you have touched , the operation buttons disappear. ¡If the title/chapter number is inputted and no operation is performed for 8 seconds, playback will start from the num- ber of the title/chapter entered. *2 On-Screen Direct Operation (Only for DVD) Some DVDs allow you to operate the DVD menu by touching the screen. Operations Operations Compatible Discs Compatible Discs Compatible Discs Disques compatibles Compatible Discs Compatible Discs Compatible Discs Discos compatibles Compatible Discs Chapter/title Selection *1 VCD VCD VCD DVD DVD DVD Showing menu and selecting an item – – – – – – – q Menu appears. w Select the desired item. (Touch when the direction buttons shown at left are not dis- played.) e Determine the setting. d d d d Returns to the previous display. q Toggles “Chapter number input mode”, “Title number input mode” and “Number input mode”. w Input desired number. e Playback starts. Starting Playback from a specific chapter/title *1 Note on VCD: For VCD, touch instead of . Touch the numerical key to enter a number directly to VCD VCD VCD DVD DVD DVD d d d d *1 *2 or – Toggles the position of the buttons on the screen between upper and lower. DVD DVD DVD Note: ¡For retrying selection during number entry, touch .

Useful Function Note: ¡If no operation is performed for 10 seconds or is touched , the operation buttons disappear. ¡It may not be possible to switch the language unless the unit is at the DVD menu (a previous page) or is at the DVD settings. (a page 38) ¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. ¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan- guage/angle. DivX DivX DivX DVD DVD DVD DivX DivX DivX DVD DVD DVD Subtitle Language It is possible to change the subtitle language during play if multiple lan- guages are recorded on the disc. Note: ¡There may be a brief delay before the subtitles appear. – ¡Touch during playback. ¡Touch during playback. ¡Touch during playback. – – – Audio Language It is possible to change the audio language during play if multiple audio lan- guages are recorded on the disc. It is possible to switch the audio between stereo sound and monaural sound (L or R). DVD DVD DVD Angle For DVDs which contain scenes which have been shot simultaneously from a number of different angles the same scene can be viewed from each of these different angles during play. ( a page 38) Angle Mark VCD VCD VCD Stereo & Monaural : stereo sound d : the left channel audio is output on both the left and right speakers. d : the right channel audio is output on both the left and right speakers. R-ch L-ch ST Touch . Touch . Chapter/title selection Fast forward/fast reverse Stop/pause/play Repeat play DVD menu Audio Language/ Angle/Subtitle Language

What is MP3/DivX? MP3*: MP3 (MPEG Audio Layer-3) is the compression format of digital audio. It is developed by MPEG (Motion Picture Experts Group). Using this compression format, you can record the contents of about 10 music CDs on a single CD (This figure refers to data recorded on a 650 MB CD-R or CD- RW at a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz). *MPEG Layer-3 audio coding technology licensed form Fraunhofer IIS and Thomson. DivX: The video compression format developed by DivX, Inc. compresses video files without any considerable loss of video quality. Note: ¡MP3/DivX encoding and CD writing software programs are not supplied with this unit. Points to remember when making MP3/DivX files Common ¡High bit rate and high sampling frequency are recommended for high quality sound. ¡Selecting VBR (Variable Bit Rate) is not recommended because playing time is not displayed properly and sound may be skipped. ¡The playback sound quality differs depending on the encod- ing circumstances. For details, refer to the instructions of your own encoding software and writing software. MP3 ¡ It is recommended to set the bit rate to “128 kbps or more” and “fixed”. DivX ¡DivX files greater than 2 GB or having no index may not play properly on this unit. ¡This unit supports all resolutions up to maximum of 720 x 480 (NTSC)/720 x 576 (PAL). ¡You can select up to 8 types of audios and subtitles on this unit. ¡GMC (Global Motion Compensation) is not supported. ¡ DivX-HD is not supported. Display Information (on the Main Unit) Displayed items Displayable characters ¡Displayable length of file name/folder name: within 64 char- acters. (Unicoded file and folder names are reduced by half in the number of displayable characters.) ¡Name files and folders in accordance with the standard of each file system. Refer to the instructions of writing software for details. ¡ASCII character set can be displayed. ¡Some Cyrillic characters in the Unicode can be displayed. ASCII character set A to Z, a to z, digits 0 to 9, and the following symbols: (space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ~ Note: ¡With some software in which MP3/DivX format files have been encoded, the character information may not be displayed prop- erly. ¡Undisplayable characters and symbols will be converted into an asterisk (*). ¡It is recommended that the length of the file name is less than 8 characters (excluding the file extension). ¡ CD-TEXT Disc title Track title ¡ MP3/DivX Folder name File name ¡ MP3 (ID3 tag) Album name Title and artist name Caution ¡ Put only “.mp3” files on an MP3-formatted disc. Put only “.DIVX”, “.divx”, “.AVI” and “.avi” files on an DivX-formatted disc. Otherwise, abnormal sound may be produced during play which can damage the speaker and your hearing.

different format types of files. ¡ If CD-DA files are on the same disc as MP3 or DivX files, the songs and the movies may not play in the intended order, or some songs or movies may not play at all. ¡ When storing MP3 data and DivX data on the same disc, use different folders for each data. ¡ Do not record files other than MP3/DivX files and unneces- sary folder on a disc. ¡ The name of an MP3/DivX file should be added by rules as shown in the following descriptions and also comply with the rules of each file system. ¡ The file extension “.mp3” should be assigned to MP3 files. ¡ The file extension “.DIVX”, “.divx”, “.AVI” or “.avi” should be assigned to DivX files. ¡ You may encounter trouble in playing MP3/DivX files or dis- playing the information of MP3/DivX files recorded with cer- tain writing software or CD/DVD recorders. ¡ This unit does not have a play list function. ¡ Although Multi-session recording is supported, the use of Disc-at-Once is recommended. Supported file systems ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet, Romeo Note: ¡ Apple HFS, UDF 1.50, Mix CD and CD Extra are not support- ed. Recording MP3/WMA files on a CD-media Folder selection order/file playback order Copyright It is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval of copyright holder except for personal enjoyment. No warranty The above description complies with our investigations as of December 2008. It has no warranty for reproducibility and displayability of MP3/DivX. Recording MP3/DivX files on a CD/DVD-media 8 k – 48 kHz Yes 8 k – 320 kbps DivX data created using ver.3.11, 4.x, 5.x* 16, 22.05, 24 kHz Yes 8 k – 160 kbps MPEG 2 audio layer 3 (MP3) 32, 44.1, 48 kHz Yes 32 k – 320 kbps MPEG 1 audio layer 3 (MP3) Sampling frequency VBR Bit rate Compression method Audio compression formats (Recommendation: “Points to remember when making MP3/DivX files” on the previous page) * DivX video system/MP2, MP3 Note: ¡ VBR is not recommended. Root Folder (Root Directory) Folder Selection Disc media File Selection Tree 1 Tree 2 Tree 3 Tree 4 Tree 8 (Max.) 2 1 4 3 q q e w r t y y 5 6 7 1 8 8 – In the order – In the order USB device Tree 1 Tree 2 Tree 3 Tree 4 Tree 5 Tree 8 (Max.) 1 3 2 q e w r t y 4 5 Maximum number of files/folders ¡Maximum number of files: 1200 (Disc media)/ 4096 (USB device) ¡ Maximum number of files in one folder: 1200(Disc media)/ 255 (USB device) ¡ Maximum depth of trees: 8 ¡ Maximum number of folders: 256 (Root folder is included.) Note: ¡You can shorten the duration between data read and playback by decreasing the quantity of files or folders, or the depth of the hierarchy. ¡ This unit counts the number of folders irrespective of the presence or absence of an MP3/DivX file. ¡ If the selected folder does not contain any MP3/DivX files, the nearest MP3/DivX files in the order of playback will be played. ¡ Playback order may be different from other MP3/DivX play- ers even if the same disc is used.

TILT TEXT CQ-VX220L SOURCE 24 CQ-VX220L 23 English Radio q Touch “Source Button”. d w Touch (Radio) on the Source Selection Screen. Source Selection Press [SOURCE] to change to the desired mode. * Appears only when is selected. (a page 39) e e e e / All Each Auto Preset FM Setup Radio Setup All Frequency Preset stations *List selection / indicator All Each Band selection [SOURCE] Source Button Tuning Auto presetting [s] [d] Operations – Band Selection List Selection Refer to the next page. Station Selection Seek Tuning …… Touch/press and hold Touch/press and hold for more than 0.5 second then release. Seeking starts. FM 1 FM 2 FM 3 AM – There are 6 stations in each list. You can call up next 6 stations by switching from one list to another. Up Down Up Down Preparation: Select . (a page 39) e e e e / All Each Auto Preset FM Setup Radio Setup All Each FM AM All [d] [s] FM 1 (list 1) FM 2 (list 2) FM 3 (list 3) Tuning [d] [s]

Manual Preset Memory Up to 6 stations can be preset in each band. Preset Station Calling Auto Preset Memory 6 stations with first to 6th highest in signal strength of each band will be preset. Preset Swap q Select the list and the preset number that contains the station to be interchanged (see “Preset station calling” above). w Select the list and hold down the preset number that contains the targeted channel for more than 2 seconds. The preset station selected in the step q is interchanged with the targeted preset channel selected in the step w (Preset Swap). Select a band and frequency. ¡Touch and hold for more than 2 seconds. ¡The frequency blinks once, and a receiving station is saved in the memory. New stations overwrite existing saved stations. ¡Touch and hold for more than 2 seconds. ¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning) New stations overwrite existing saved stations. ¡Touch and hold for more than 2 seconds. ¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning) New stations overwrite existing saved stations. In total 18 FM stations are automatically preset. A station preset is inter- changeable with another station preset. B – – – – Six stations are automati- cally preset in each band. A to – Preset Memory blinks once Select a band or a list. Select a band. ¡Touch desired preset button. 18 stations with first to 18th highest in signal strength of all FMs will be preset at once. Preparation: Select . (a page 39) (default: ) e e e e / All Each Auto Preset FM Setup Radio Setup Each Each Preparation: Select . (a page 39) e e e e / All Each Auto Preset FM Setup Radio Setup All Preparation: Select . (a page 39) e e e e / All Each Auto Preset FM Setup Radio Setup All Each All to to

TILT TEXT CQ-VX220L SOURCE 25 USB - Audio Device Control English 26 CQ-VX220L q Touch “Source Button”. d Source Selection Note: ¡ This unit plays back MP3/WMA files stored on a USB memory. ¡ Back up any important data beforehand. We cannot accept responsibility for any lost data. ¡ Refer to the section on “Compatible USB devices”. (a page 6) ¡ Refer to the section on “Notes on MP3/DivX”. (a page 22) ¡ A file with a play time exceeding 1 000 minutes will not play correctly to the end of the track. ¡ When connecting (disconnecting) a USB memory, turn down the volume of the unit. ¡ When connecting a USB memory, make sure the con- nector is pushed all the way into the socket. ¡ Do not leave the USB device for long periods of time in places inside the car where the temperature rises too high. ¡ The USB devices that do not comply with the USB standard may not normally play with this unit. ¡ Even mass storage class USB devices may not nor- mally play with this unit. ¡ The USB devices that contain other than MP3/WMA files may not normally play with this unit. Caution ¡ Position the USB device and cable so that they do not interfere with your driving. ¡ Do not connect any USB device other than a USB memory, a USB audio player or an iPod/iPhone. Do not connect multiple USB devices to the USB con- nector. Supplying power to multiple USB devices from the connector could cause overheating and smoking. Preparation: ¡Connect a USB audio device to USB connector of this unit. w Touch (iPod/USB) on the Source Selection Screen. Press [SOURCE] to change to desired mode. [SOURCE] Source Button Title/text scroll Folder selection Playing time Operation Buttons

back to the upper tier. ¡It is not possible to display the whole tree and file list in a folder. ¡The displayed contents on the touch panel vary with circumstances. List (Folder/File) Selection File Selection Fast Forward/ Fast Reverse Folder Selection Title/text Scroll Pause Repeat Play Repeat Play within the Current Folder Random Play …… Touch/Press and hold * Touch panel symbols will change to indicate these current mode. , , To resume playback, touch again. * – – [d] Next file Beginning of the current file Previous track/file (Touch/press twice.) Fast forward Release to resume playback. Fast reverse Release to resume playback. Next folder Scrolls the title/text once Previous folder – To cancel, touch again. To cancel, touch and hold for more than 2 seconds again. – – – – * Random Play within the Current Folder To cancel, touch again. To cancel, touch and hold again. * * * * q Touch (folder name) to select a folder. , : scrolls up/down the file list by 1 page. , : scrolls up/down the file list by 1 line. w Touch (file name) to play. : Folder : MP3/WMA file – – Scan Play To cancel, touch again. Folder Scan Play The first 10 seconds of the all the folder is played. To cancel, touch and hold for more than 2 seconds again. Basic Operations [d] [s] [s]

English 28 CQ-VX220L Note: ¡ Please read the operating instructions of your iPod/iPhone as well as this book. ¡ Please disconnect iPod/iPhone accessories such as earphones before connecting the iPod/iPhone to this unit. ¡ If your iPod/iPhone is not working correctly, discon- nect it from this unit, reset it and then reconnect it to this unit. ¡ We shall not guarantee all the functions of the iPod/iPhone to be connected. ¡ The number of displayable characters for a file name is limited. (up to 252 bytes) Controllable iPod, iPhone/software version ¡ iPod (5th generation, ver. 1.3) ¡ iPod nano (1st generation, ver. 1.3.1) ¡ iPod nano (2nd generation, ver. 1.1.3) ¡ iPod nano (3rd generation, ver. 1.1.2) ¡ iPod nano (4th generation, ver. 1.0.2) ¡ iPod classic (ver. 1.1.2) ¡ iPod touch (1st generation, ver. 1.1.4) (video play- back is not supported.) ¡ iPod touch (2nd generation, ver. 2.1.1) ¡ iPhone (ver. 2.1.0) * The applicable models have been confirmed as the end of January 2009. We do not guarantee the oper- ation with our future products or upgraded soft- ware. ¡ When connecting (disconnecting) a iPod/iPhone, turn down the volume of the unit. ¡ When connecting a iPod/iPhone, make sure the con- nector is pushed all the way into the socket. ¡ Do not leave the iPod/iPhone for long periods of time in places inside the car where the temperature rises too high. Preparation: ¡Connect an iPod/iPhone to USB connector of this unit. ¡Connect an iPod/iPhone to USB connector and AV1 IN of this unit with CA-LDC100X (option) for iPod/iPhone Video. Caution ¡ Position the USB device and cable so that they do not interfere with your driving. ¡ Do not connect any USB device other than a USB memory, a USB audio player or an iPod/iPhone. Do not connect multiple USB devices to the USB con- nector. Supplying power to multiple USB devices from the connector could cause overheating and smoking. q Touch “Source Button”. d Source Selection w Touch (iPod/USB) on the Source Selection Screen. Video Mode Display Source Button Playing time Operation Buttons Audio Mode Display Source Button Current track Playing time Operation Buttons Title/text scroll Title scroll Button leading to the audio mode Button leading to the video mode To switch Operation Screen ON, touch the center of touch panel. (only for video mode) Press [SOURCE] to change to desired mode. TILT CQ-VD5005W DIMMER DIM TUNE/TRACK MUTE SETUP SOURCE POWER VOL PUSH SEL AV1 IN OPEN CLOSE DIMMER IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER TILT TEXT CQ-VX220L SOURCE [SOURCE] Source Button Title/text scroll Playing time Operation Buttons

play list. (Playlists/Artists/Albums/Songs/Genres) , : scrolls up/down the file list by 1 page. , : scrolls up/down the file list by 1 line. w Select a folder in the same manner as q. e Touch (file name) to play. Note: ¡ It is not possible to display the whole tree and file list in a folder. ¡ The displayed contents on the touch panel vary with circumstances. …… Touch/Press and hold * Touch panel symbols will change to indicate these current mode. Operations Basic Operations File Selection Fast Forward/ Fast Reverse Title/text Scroll Pause Repeat Play (Only for Audio mode) Shuffle Songs (Only for Audio mode) * To resume playback, touch again. – – Next file Beginning of the current file Previous track/file (Touch/press twice.) Fast forward Release to resume playback. Fast reverse Release to resume playback. Scrolls the title/text once – To cancel, touch again. – – Selection of video mode or audio mode – Changes from the video mode to the audio mode. Changes from the audio mode to the video mode. – [d] [s] Shuffle Albums (Only for Audio mode) To cancel, touch again. To cancel, touch and hold again. * * Note: ¡The All Repeat Play function of iPod is always activated and cannot be canceled from this unit. Note: ¡The shuffle function of iPod corresponds to the Random function of this unit. Every time the iPod is switched between the audio mode and the video mode, the list selection screen appears first (not the operation screen). Touch the list name to select the play list and play the desired file. Note: ¡ The “Disp” button on the touch panel will be disabled while the list selection screen appears. However, this phenomenon is not a trouble with the main unit. Use the list selection screen to play the desired file. [d] [s] Example: iPod Audio

TILT TEXT CQ-VX220L SOURCE [SOURCE] 29 English AV1/AV2 Note: ¡ Every time the source is switched from iPod mode to AV1 mode while iPod/iPhone video file is playing on this unit, the still image of iPod/iPhone video file will be displayed on the screen with AV1 mode. However, this phenomenon is not a trouble with this unit and iPod/iPhone unit. Make sure to remove the cable connection (CA- LDC100X, option) of front AV1 IN to iPod/iPhone and connect the desired AV device to front AV1 IN connec- tor using supplied conversion cable for AV1 IN when you want to enjoy AV1 mode under above circum- stance. ¡ You can set up the system so that the AV mode is not selected (source skip). ( a page 34) ¡ If no operation is performed for 10 seconds or is touched, the operation buttons disappear. ¡ Only the pin jack of the supplied Conversion Cable for AV 1 IN or a pin jack that has the same electrode arrangement can be connected to the AV 1 IN termi- nal. (See Fig. 1.) ¡ Use of the supplied Conversion Cable for AV 1 IN or an audio pin jack that has the same electrode arrange- ment also allows users to enjoy only music. In this case, the screen background becomes black. Input Preparation: ¡Connect an optional external device to the AV1/AV2. You can view the images and listen to the sounds from the connected external devices in the AV1/AV2 mode respectively. To switch Operation Screen ON, touch the center of touch panel. q Touch “Source Button”. d w Touch / (AV1/AV2) on the Source Selection Screen. Source Selection Audio (L) Video Ground Audio (R) AV1 IN Source Button Press [SOURCE] to change to desired mode.

Setting for FM stations Radio Radio (a page 39) DivX Registration (a page 39) DVD Audio Setting (a page 38) DVD Video Setting (a page 38) DVD Menu Language Setting (a page 38) DVD Subtitle Language Setting (a page 38) DVD Audio Language Setting Disc Disc (a page 37) Balance/fader adjustment (a page 37) Bass/treble adjustment (a page 37) SQ3 setting Sound Sound (a page 36) Display aspect setting (a page 36) Display appearance (a page 36) Adjusting the brightness Screen Screen (a page 35) Memory clearance (a page 35) Other settings (a page 34) Input Selection (a page 34) ID Code Setting (a page 34) Clock setting Basic Setting Basic Setting

[PUSH SEL] [SETUP] (Shows the menu display/ Goes back to the previous menu) TILT CQ-VD5005W DIMMER DIM TUNE/TRACK MUTE SETUP SOURCE POWER VOL PUSH SEL AV1 IN OPEN CLOSE DIMMER IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER TILT TEXT CQ-VX220L [DIM] (DIMMER) (The screen brightness is toggled between the set level and maximum luminance) ❏Setup Operation Note: ¡ The display returns to the previous status if there is no operation for more than 60 seconds after changing to the set- ting menu. ¡ The item may not be temporarily selected depending on the current disc type or the state of this unit. In such a case, change the source to another one and try to set up the item again. (Example: DVD mode) Touch in Operation Screen. Touch desired setting. q w (Example: setting screen of a page 36) Display Adjustment Determines the setting and goes back to the previous menu. e Determines the setting and gets out of the menu

until “Completed!” is displayed. The ID code cancelling procedure is completed. The unit now works without an ID code. Note: ¡Should your unit ever require service, cancel your ID code before sending for repair. ¡The ID code setting cannot be eliminated even by the memory clear function. ¡The inputted code is not displayed for your security. Clock Clock setting : clock display ON (“– –:– –” is displayed before adjusting the clock.) : clock display OFF default: : Forward : Backward Note: ¡To start the clock, touch . ¡Set the Daylight Saving Time manually. default: Hour Adjust: AM12 Minute Adjust: 00 ID-Code ID Code Setting Prior to operating this unit, it is advisable to assign a 4- digit ID code for security. Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It is electronically locked so that a thief cannot use the stolen unit unless that per- son knows the code you have set. The ID code operation must be performed only by the person to whom the unit belongs. Generally, it is not necessary to enter the ID code each time when using the unit if it has not been disconnected from the main power supply (car battery). to 4 digits numeric code default: none How to set your ID code (for the first time) q Enter an 4 digit ID code. w Enter the same 4 digit ID code again. How to change your ID code q Enter the preset (old) 4 digit ID code. If the wrong ID code is entered, a new ID code cannot be registered. w Enter a new 4 digit ID code. e Enter the new 4 digit ID code again. How to cancel the known ID code q Enter the preset (old) 4 digit ID code. If the wrong ID code is entered, it is not possible to cancel the ID code function. 9 0 { } (Clock adjustment) Adjust Off Off On (Clock display) Display Caution ¡Record your registered ID code and keep it in a secure location. (Fill in the ID code memo (a page 46).) If you forget it, you will be unable to use the unit. In case you forget the ID code, please consult your nearest Panasonic Service Center. Input input selection Note: ¡If a non-Panasonic navigation system is connected to this unit, we do not guarantee the operations of the navigation system. : an external device is connected to AV1. : skips AV1. default: : an external device is connected to AV2. : Select one from among NAV1, NAV2, and NAV3 with which images are dis- played most beautifully when a non- Panasonic car navigation system is con- nected. : skips AV2. default: Selection of the terminal that connects to the rear view camera. Preparation: Connect the reverse lead. (a Installation Instructions) : connected to the CAMERA IN : unconnected default: Note: ¡Make sure to select when no rear view camera is connected. ¡The image from the rear view camera may be blurred in the night or a dark place. Off Off Off On (Rear view camera set up) Camera AV2 Skip NAV1-3 AV2 (AV2 input selection) AV2 AV1 Skip AV1 (AV1 input selection) AV1

: sets to OFF if your car has no ACC posi- tion. default: Note: ¡For an ACC-equipped car, select ON. The following functions are available. ¡The power is turned on automatically when inserting a disc. ¡ selection disables turning on the power of the main unit through the remote control (option). : activates the security alarm. (a page 11) : inactivates the security alarm. default: : Blue-based screen : Green-based screen : Red-based screen default: Blue Red Green Blue (OSD color setting) OSD Color On Off On (Security Alarm) Security Alarm Off On Off On (Setting ACC selection ON and OFF) ACC Select Caution ¡Be sure to select off when your car has no ACC position in the ignition switch. Failure to do this could cause the battery to go dead. Memory Clear Memory clearance The state of all of the current memories are returned to default settings. Note: ¡The ID code is not deleted by executing memory clear. : clears the memory to default settings : no memory clear. The display returns to the previous one. appears when is selected. : proceed. : no memory clear. Note: ¡The power of this unit is turned off automatically after is selected. (memory clearance completed). Please turn on the power again to using this unit. OK Cancel OK Yes Really? No Yes Caution ¡Be aware that this setting restores the unit to default settings, so that all the memories and settings that you have set will be eliminated.

default: Note: ¡When [DIM] is pressed, the screen brightness is tog- gled between the set level that is adjusted by the proce- dure above and the maximum luminance. 1 3 2 1 Display Display appearance : decreases the contrast between black and white. : increases the contrast between black and white. [ ] (Adjust the image contrast) Contrast Aspect Display aspect setting : darkens. : lightens. [ ] (Adjust the image brightness) Bright : lightens the depth of color on the display. : deepens the depth of color on the display. [ ] (Adjust the image color depth) Color : emphasizes green in the color image. : emphasizes red in the color image. Note: ¡When the video signal is PAL/SECAM format, adjust- ment cannot be performed. Setting range: –15 to +15 default: ±0 [ ] (Adjust the image tone or tint) Tint Radio Disc Sound Screen Basic Setting Darker Brighter ¡The conventional display image has a 4 to 3 ratio of horizontal to vertical. ¡In this case, a blank area remains on the right and left sides of the display. Normal Full Zoom Just ¡The screen is extended horizontally as a whole to the aspect ratio of 16 to 9. ¡The extension ratio is the same at any point of the screen. ¡The screen is fully extended at the normal aspect ratio of 4 to 3. ¡The top and bottom of the screen are slightly cut. ¡The screen is extended horizontally to the aspect ratio of 16 to 9. ¡The extension ratio increases toward the right and left ends of the screen. default: Normal Note: ¡The aspect setting screen can be also activated by touching when the button is displayed. (a page 12) ¡This adjustment is common to video mode. ¡You cannot change the aspect in the menu screen and a screen in the CD, MP3 and radio mode. These are fixed to “Full”. ¡When the rear view camera is in operation with the transmission gear shift in the reverse position, the image is shown on the “Full” screen only. ¡In some cases, the picture looks different from the original one due to your selection of aspect. Aspect Caution ¡This is to remind you that compression or extension of the screen using the aspect ratio (screen mode) changing function of this product for commercial purpose of profit making or viewing/listening by the public could infringe on the rights of the author pro- tected by the copyright law. ¡If you expand normal picture (4 to 3) by using “Just”, “Zoom” or “Full” aspect to the full of the screen, you might not see the periphery of the pic- ture, or you might see a distorted picture. Therefore, use the “Normal” mode to see the origi- nal picture as the author intended it. (Display)

when the button is displayed (a page 12). SQ3 SQ3 setting Six SQ presets are already provided at shipment in this unit. : flat frequency response : wide-ranged and deep sound : speedy and heavy sound : jazz-specific deep sound : club and disco-specific sound : clear sound default: You may set your own SQ or modify factory presettings in each memories by following the instructions below: Adjusting level of each preset q Select the preset SQ that you prefer to adjust. w Touch or to select a frequency in a fre- quency band (BASS/MID/TRE). e Touch or to adjust each frequency. Adjustable range: – 12 dB to + 12 dB Adjustable frequency: BASS; 60 Hz, 80 Hz, 100 Hz, 200 Hz MID; 500 Hz, 1 kHz, 2 kHz, 3 kHz TRE; 10 kHz, 12 kHz, 15 kHz, 18 kHz Note: ¡The new level adjustment will overwrite the previous level adjustment. ¡For resuming the factory settings, touch and hold for more than 2 seconds. Bass/Treble Bass/treble adjustment : more : less : more : less Setting range: –12 dB to +12 dB default: ±0 dB ] [ (Treble adjustment) Treble ] [ (Bass adjustment) Bass Default Flat Vocal Club Jazz Rock Pop Flat Sound Balance/Fader Balance/fader adjustment : right enhanced : left enhanced Setting range: Right 15 to Left 15 default: : front enhanced : rear enhanced Setting range: Front 15 to Rear 15 default: Audio setting with [VOL] (PUSH SEL) on the main unit Audio settings of , , and can be performed with [VOL] (PUSH SEL) on the main unit. q Press [VOL] (PUSH SEL) to select a setting item. d d d d w Rotate [VOL] to make an adjustment. Fader Balance Treble Bass (Regular mode) Fader Balance Treble Bass Center ] [ (Sound level adjustment between front and rear speakers) Fader Center ] [ (Sound level adjustment between right and left speakers) Balance

: plays a video in 4:3 screen. : plays a video in wide screen (16:9). default: Wide Wide Narrow (Display aspect setting) DVD Aspect : plays wide-screen video in Pan & Scan mode (in which the left and right edges of the screen are cut off). : plays wide-screen video in letterbox mode (in which black bands appear at the top and bottom of the screen). default: Note: ¡This function is available only when is set to . ¡Set the software setting according to the symbol used on jacket. (a page 16) ¡DVD software mode setting is ignored if or is already set in the software. ¡Screen aspect of the display unit is changed according to the aspect ratio setting (a page 36) and DVD soft- ware’s aspect. : sets PAL in accordance with the equip- ment connected to VIDEO OUT. : sets NTSC in accordance with the equipment connected to VIDEO OUT. default: The angle mark is displayed to indicate the parts where multi-angle data is recorded. : activates angle mark. : inactivates angle mark. default: On Off On (Angle mark setting) Angle Mark NTSC NTSC PAL (VIDEO OUT terminal setting) TV Type Letter Box Pan & Scan Narrow DVD Aspect Pan & Scan Letter Box Pan & Scan (DVD software mode) Letter Box Menu Language DVD menu language setting : English : French : Spanish : other language. Input the language code. (a page 49) default: English Other Español Français English Audio Language DVD audio language setting Note: ¡These adjustments being executed, playback will start from the beginning of a disc. : English : French : Spanish : other language. Input the language code. (a page 49) default: English Other Español Français English Subtitle Language DVD subtitle language setting Note: ¡A disc supporting closed captioning and subtitles may overlap each other on the screen. In this case, turn the subtitle off. : English : French : Spanish : other language. Input the language code. (a page 49) default: English Other Español Français English Radio Disc Sound Screen Basic Setting

: surround element decodable down mix (Lt = Left total, Rt = Right total) : simple stereo down mix (Lo = Left only, Ro = Right only) Note: ¡This function is available only when “Dolby Digital” source is playing. default: : DR COMP ON : made with the greatest compression, roughly equivalent to a TV broadcast. : DR COMP OFF Note: ¡This function is available only when “Dolby Digital” source is playing. default: Off Off MIN STD (Dynamic Range Compression setting) DR COMP Lt/Rt Lo/Ro Lt/Rt (Down mix setting) Down Mix FM Setup Setting for FM stations : saves the preset stations in each band. : saves the preset stations in all FM lists regardless of band. default: Each All Each (Auto preset setting) Auto Preset Radio Disc Sound Screen Basic Setting DivX Registration Show the DivX Registration Code (a page 40)

Display the unit’s registration code q Touch . w Touch . e Touch . 8 alphanumeric characters Note: ¡We recommend that you make a note of this code for future reference. ¡After playing DivX VOD content for the first time, another registration code is then displayed in “DivX Registration”. Do not use this registration code to pur- chase DivX VOD content. If you use this code to pur- chase DivX VOD content, and then play the content on this unit, you will no longer be able to play any content that you purchased using the previous code. ¡If you purchase DivX VOD content using a registration code different from this unit’s code, you will not be able to play this content. (“Authorization Error” is dis- played.) Regarding DivX content that can only be played a set num- ber of times Some DivX VOD content can only be played a set number of times. When you play this content, the remaining num- ber of plays is displayed. You cannot play this content when the number of remaining plays is zero. (“Rental Expired” is displayed.) When playing this content ¡The number of remaining plays is reduced by one if - you press [SOURCE]. - you press [s] / [d] etc. and arrive at another content or the start of the content being played. DivX Registration Disc DivX Video-on-Demand (VOD) content is encrypted for copyright protection. In order to play DivX VOD content on this unit, you first need to register the unit. Follow the on line instructions for purchasing DivX VOD content to enter the unit’s registration code and register the unit. For more information about DivX VOD, visit www.divx.com/vod.

Check and take steps as described below. If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Service Center. The product should be serviced only by qualified personnel. Please refer checking and repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking. Never take measures except those indicated by italic letters in “Possible Solution” described below because those are too dangerous for users to handle themselves. Warning ¡Do not use the unit in an irregular condi- tion, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer. ¡Never try to repair the unit by yourself because it is dangerous to do so. Problem Possible cause a Possible solution No power to the unit The power cord (battery, power and ground) is connected in the wrong way. aCheck the wiring. Fuse blows out. aEliminate the cause of fuse blowout and replace the fuse with new one. Consult your dealer. Sound is not generated. MUTE is set to ON. aSet MUTE to OFF. The wiring of speaker lines is not correct, or a break or poor contact arises. aCheck the wiring in accordance with the wiring diagram. (Installation Instructions) Noise There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines. aKeep the electromagnetic-wave generator such as a cellular phone away from the unit and the wiring of the unit. In case noise cannot be eliminated due to the wiring harness of the car, consult your dealer. The contact of the ground lead is poor. aMake sure that the ground lead is connected to an unpainted part of the chassis securely. Noise is made in step with engine revolutions. Alternator noise comes from the car. aChange the wiring position of the ground lead. aMount a noise filter. Some operations are not executable. Some operations are not executable in particular modes such as menu mode. aRead the operating instructions carefully and cancel the mode. If the unit is still out of order, consult your dealer. No sound from speaker(s) There is a break, a short circuit, poor contact or wrong speaker wiring. aCheck the speaker wiring. The speaker channels are reversed between right and left. The speaker wiring is reversed between right and left. aPerform the speaker wiring in accordance with the wiring diagram. The power of the unit fails unintentionally. The safety device is activated. aConsult your dealer, or your nearest Panasonic Service Center.

Antenna installation or wiring of antenna cable is faulty. aCheck whether the antenna mounting position and its wiring are correct. In addition, check to see whether the antenna ground is securely connected to the chassis. No power is supplied to the antenna amplifier (when using a film antenna, etc.). aCheck the wiring of the antenna power lead. The number of auto preset stations is less than 6. The number of receivable stations is less than 6. aMove to an area where receivable stations number is maximum, and try presetting. Preset stations cannot be stored. The contact of the battery lead is poor, or the battery lead is not always powered. aMake sure that the battery lead is connected securely, and preset stations again. Sound skipping or noise There is a flaw or foreign object on the disc. aRemove the foreign object, or use a flawless disc. No playback or disc ejected The disc is inserted upside down. aInsert a disc correctly. There is a flaw or foreign object on the disc. aRemove the foreign object, or use a flawless disc. Sound skipping due to vibration The unit is not sufficiently secured. aSecure the unit to the console box. The unit is tilted at over 30˚ in the front-to-end direction. aMake the angle 30˚ or less. Disc unejectable Something such as a peeled label obstructs the disc coming out. aPress and hold the [u] for more than 10 seconds (disc forced ejection). If the disc forced ejection does not work, consult your dealer. The microcontroller in the unit operates abnormally due to noise or other factors. aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer. The picture is dark. The picture is whitish. Something is wrong with the picture. The picture is light in color. The screen is not adjusted properly. aMake every adjustment on the screen. The display does not go back into the unit. The monitor stops on the way to the home position. aPress [OPEN]. ■Display Settings ■Common (continued) Output disabled/distorted video/audio. The conversion cable for AV 1 IN supplied with this unit is not used for the terminal of AV1 IN. aUse the conversion cable for AV 1 IN supplied with this unit for the connection.

language/subtitle language/angle. ¡It is not possible to switch if the disc does not have multiple audio languages/subtitle languages/angles recorded on it. (Refer to the guide provid- ed with your disc.) ¡Some discs permit switching through a menu screen. ¡Sometimes, switching angles is possible only with certain scenes. The audio/subtitle language selected in the DVD settings is not used. If audio or subtitles in that language are not recorded on the disc, the audio or subtitles do not switch to that language. (Some discs permit switching through a menu screen. Refer to the guide provided with your disc.) A DVD–R or DVD–RW is not playable. The disc is still unfinalized. aFinalize the disc. Refer to “Before Disc Playback” (a page 16) or “Notes on Discs” (a page 48) for other cases. The disc is in the video recording (VR) format. aPlay video formatted discs. Refer to “Before Disc Playback” (a page 16) or “Notes on Discs” (a page 48) for other cases. ■DVD No playback or disc ejected The disc has unplayable formatted data. aRefer to the description about MP3/DivX for playable formats. The CD-Rs/RWs/DVD- Rs/RWs that are playable on other devices are not playable on this unit. The playability of some CD-Rs/RWs/DVD-Rs/RWs may depend on the combina- tion of media, recording software and recorder to be used even if these CD- Rs/RWs/DVD-Rs/RWs are playable on other devices such as a PC. aMake CD-Rs/RWs/DVD-Rs/RWs in a different combination of media, recording software and recorder after referring to the description about MP3/DivX. Sound skipping or noise There is a flaw or foreign objects on the disc. aRemove the foreign objects, or use a flawless disc. For MP3/DivX, refer to the description about MP3/DivX. Playing VBR (Variable Bit Rate) files may cause sound skipping. aPlay Non-VBR files. The picture stops. The picture may stop if the DivX files are greater than 2 GB. aKeep the file size under 2 GB. ■MP3/DivX Note: ¡Refer to “Notes on MP3/DivX”. (a page 22) Sound is not generated. The audio format is output disabled for this unit such as dts. aUse output enabled discs. Refer to “Before Disc Playback” (a page 16) or “Notes on Discs” (a page 48) for other cases.

Note: ¡There may be cases when the disc numbers affected by an error are displayed before “Non Playable Disc”. ■CD/MP3/DivX/DVD/VCD (Video CD) Display Possible cause a Possible solution Non Playable Disc Disc is dirty, or is upside down. aCheck disc. Disc has scratches. aCheck disc. Mechanism Error No operation by some cause. aPress [u]. If failure persists, press the reset switch. If normal operation is not restored, call the store where you purchased the unit or the nearest Panasonic Service Center. File Error The type of file that is selected is not supported. aCheck disc. No Disc No disc is in the player. aInsert disc into the disc slot. Region Code Error The region code of the disc to be used is not compatible with this unit. aPress [u] and check the disc. You are trying to play the DivX VOD content that was purchased with a different registration code. aPurchase the DivX VOD content with the registration code of this unit. (a page 40) The DivX VOD content has no available play count. aPurchase again the content or play another content. (a page 40) DivX HD not Supported The selected DivX HD file is not supported. aCheck the file. Play Non-DivX HD files.

No playable files exist. aUse the type of USB device that is suitable for this unit. An unsupported USB device was connected. aRecord files that can be played back on this unit onto the USB device. Hardware Error A USB device that exceeds the current capacity that can be supplied was connect- ed. aUse a USB device that has a consumption current of less than 500 mA. For some reason, an over-current was detected. aSwitch the Source, and select USB (MP3/WMA) mode again. aCheck that the USB connector section is not dirty, and that there is no foreign material. Read Error No operation by some cause. aSwitch the power or ACC ON/OFF. If this does not solve the problem, unplug the power cord and plug it in again. In case the unit is still out of order, con- sult your dealer. (a Installation Instructions) Decode Error No operation by some cause. aSwitch the power or ACC ON/OFF. If this does not solve the problem, unplug the power cord and plug it in again. In case the unit is still out of order, con- sult your dealer. (a Installation Instructions) File Error The player for some reason cannot read the file you are trying to play. (File record- ed in an unsupported file system, compression scheme, data format, file name extension, damaged data, etc.) aConfirm that the USB extension cable is firmly connected, and reconnect if not. Select a file that the player can read. Check the type of data stored in the USB device. Format the USB device if necessary. DRM Protected A WMA file can be copyrighted. aThe file protected by copyright is not playable. No File Your USB device has no playable file. aDownload playable file to your USB device.

code... In case you forget the ID code, please consult your nearest Panasonic Service Center. ID code memo Copy the memo at right, fill in the ID code, and keep it in a secure location. Model No. CQ-VX220L ID CODE ❑Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Service Center. The product should be serviced only by a qualified technician. ❑Replacing the Fuse Use fuses of the same specified rating (15 A). Using dif- ferent substitutes or fuses with higher rating, or connect- ing the product directly without a fuse, could cause fire or damage to this unit. If the replacement fuse fails, contact your nearest Panasonic Service Center for service. ❑If the Unit Begins to Malfunction... Reset switch Remove the face plate (a page 11) and insert a hard, slender stick into the hole and push the switch. Important Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.) If the unit fails to return to normal condition, call the near- est Panasonic Service Center and ask for repairs. Note: ¡If the ID-CODE has been already set, you will be asked to enter the ID-CODE right after the unit is restarted. TILT CQ-VX220L AV1 IN OPEN Reset switch

1 Moisten the soft cloth in dish soap diluted with water and wring well. 2 Wipe lightly. Go over the same surface with a dry cloth. Note: ¡Since there is the possibility of water drops getting inside of the unit, do not directly apply cleanser to the surface. ¡Do not scratch the screen with your nails or other hard objects. The resulting scratches or marks will obscure the images. ❑Cleaning this Unit Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry soft cloth for routine exterior cleaning. Never use benzine, thinner or other sol- vents. Alcohol Pesticide Wax Benzine Thinner Caution ¡If water drops or similar wet substances get inside the monitor, it may cause a malfunction. Alcohol Pesticide Wax Benzine Thinner

How to hold the disc ¡Do not touch the underside of the disc. ¡Do not scratch the disc. ¡Do not bend disc. ¡When not in use, keep disc in the case. Do not use discs that fit any of the descriptions given below. Using these discs may damage the discs or cause the unit to malfunction. ¡Special discs in a shape which is not round ¡Partly or wholly transparent disc *Wholly semi-transparent disc may not be played back. ¡Discs with adhered labels, etc. on them ¡Damaged or deformed discs Discs with burrs Please remove the burrs before use. Discs with cracks, scratches or parts missing Shoddily made discs Disc accessories (stabiliz- ers, etc.) Protective films or sheets Labels created by a printer Disc with adhered stickers or tape Partly transparent disc Wholly transparent disc* Disc insert The surfaces of new discs tend to be slippery. Therefore, when using such a disc for the first time, it may not load satisfactorily even when it has been inserted into the unit. At a time like this, insert the disc into the unit as far as it will go until it is loaded properly. ¡When inserting a disc into or ejecting and removing it from the unit, insert it straight in or eject and remove it straight out in parallel with the unit. Otherwise, the disc may be scratched or marked in the process. ¡When inserting a disc, do not put one disc on anoth- er. Failure to observe this may cause the discs to be jammed. Do not leave discs in the following places: ¡Direct sunlight ¡Near car heaters ¡Dirty, dusty and damp areas ¡On seats and dashboards Disc cleaning Use a dry, soft cloth to wipe from the center outward. Do not attach any seals or labels to your discs. Do not write on the disc label in a heavy pen or ballpoint pen. Notes on CD-Rs/RWs, DVD–Rs/RWs ¡You may have trouble playing back some CD-R/RW, DVD–R/RW discs recorded on CD/DVD recorders (CD- R/RW, DVD–R/RW drives), either due to their record- ing characteristics or dirt, fingerprints, scratches, etc. on the disc surface. ¡CD-R/RW, DVD–R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them inside a car for extended periods may damage them and make playback impossible. ¡The unit may not successfully playback a CD-R/RW, DVD–R/RW that was made by the combination of writ- ing software, a CD/DVD recorder (CD-R/RW, DVD–R/RW drives) and a disc if they are incompatible with one another. ¡This player does not play CD-R/RW, DVD–R/RW discs if the session is not closed. ¡Be sure to observe the handling instructions of CD- R/RW, DVD–R/RW discs. ¡This player does not play CD-R/RW, DVD-R/RW discs which contain other than CD-DA or MP3/DivX data. Printed side

8277 Rhaeto-Romance 8279 Romanian 8285 Russian 8365 Sanskrit 8368 Sindhi 8372 Serbo-Croatian 8373 Singhalese 8375 Slovak 8376 Slovenian 8377 Samoan 8378 Shona 8379 Somali 8381 Albanian 8382 Serbian 8385 Sundanese 8386 Swedish 8387 Swahili 8465 Tamil 8469 Telugu 8471 Tajik 8472 Thai 8473 Tigrinya 8475 Turkmen 8476 Tagalog 8479 Tonga 8482 Turkish 8484 Tatar 8487 Twi 8575 Ukrainian 8582 Urdu 8590 Uzbek 8673 Vietnamese 8679 Volapük 8779 Wolof 8872 Xhosa 8979 Yoruba 9072 Chinese 9085 Zulu Code Language Name 7289 Armenian 7365 Interlingua 7378 Indonesian 7383 Icelandic 7384 Italian 7387 Hebrew 7465 Japanese 7473 Yiddish 7487 Javanese 7565 Georgian 7575 Kazakh 7576 Greenlandic 7577 Cambodian 7578 Kannada 7579 Korean 7583 Kashmiri 7585 Kurdish 7589 Kirghiz 7665 Latin 7678 Lingala 7679 Laothian 7684 Lithuanian 7686 Latvian, Lettish 7771 Malagasy 7773 Maori 7775 Macedonian 7776 Malayalam 7778 Mongolian 7779 Moldavian 7782 Marathi 7783 Malay 7784 Maltese 7789 Burmese 7865 Nauru 7869 Nepali 7876 Dutch 7879 Norwegian 7982 Oriya 8065 Panjabi 8076 Polish 8083 Pashto, Pushto 8084 Portuguese 8185 Quechua Code Language Name 6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Ameharic 6582 Arabic 6583 Assamese 6589 Aymara 6590 Azerbaijani 6665 Bashkir 6669 Byelorussian 6671 Bulgarian 6672 Bihari 6678 Bengali; Bangla 6679 Tibetan 6682 Breton 6765 Catalan 6779 Corsican 6783 Czech 6789 Welsh 6865 Danish 6869 German 6890 Bhutani 6976 Greek 6978 English 6979 Esperanto 6983 Spanish 6984 Estonian 6985 Basque 7065 Persian 7073 Finnish 7074 Fiji 7079 Faroese 7082 French 7089 Frisian 7165 Irish 7168 Scots Gaelic 7176 Galician 7178 Guarani 7185 Gujarati 7265 Hausa 7273 Hindi 7282 Croatian 7285 Hungarian Code Language Name In “Other” cases... (a page 38) Note: ¡Setting is finished and the display returns to the main menu. ¡For retrying selection during number entry, touch . DVD language menu (a page 38) Input the four digit language code pressing the buttons to . Touch to determine.

Dolby Digital This fully discrete format divides the music signals into 5.1 channels: Front Left (L), Front Right (R), Centre (C), Left Surround (LS), Right Surround (RS) and Subwoofer (SW: 0.1 channel) for recording and playback. The number of channels that are recorded depends on the software. (1 to 5.1 channels) Interactive DVD An interactive DVD is DVD software which includes multiple angles, multiple plot endings, etc. Letterbox screen This refers to a screen on which the playback picture of wide-screen DVDs or VCD (Video CD)s appears with black bands running along the top and bottom. LPCM (Linear PCM audio) In this format, the audio signal is converted to digital data and recorded in two channels without compres- sion. Because the capacity of a DVD disc is large, it can store more data with better accuracy than a CD. Pan & Scan screen This refers to a screen on which the playback picture of wide-screen DVDs or VCD (Video CD)s is cut off at the left and right sides. Playback control (VCD (Video CD)) If the VCD (Video CD) has “With Playback Control” or others written on the disc surface or on the jacket, the scenes or information to be viewed (or listened to) can be selected interactively with the screen by looking at the menu shown on the screen. In these instructions, playback using the menu screen is referred to as the “menu play” for video CDs. This player supports Video CDs with playback control. DivX DivX is a popular media technology created by DivX, Inc. DivX media files contain highly compressed video with high visual quality that maintains a rela- tively small file size. DivX files can also include advanced media features like menus, subtitles, and alternate audio tracks. Many DivX media files are available for download online, and you can create your own using your personal content and easy-to- use tools from DivX.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992–1997 Dolby Laboratories. All rights reserved. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Official DivX® Certified product Plays all versions of DivX® video with standard play- back of DivX® media files DivX,DivX Certified, and associated logos are trade- marks of DivX, Inc. and are used under license.

age 14.4 V, negative ground ¡Current consumption : Less than 10 A (during disc play- back) ¡Maximum power output : 50 W x 4 ch ¡Power output : 20 W x 4 ch ¡Compatible speaker impedance : 4 Ω– 8 Ω ¡Video input signal : Composite video signal, 1.0 Vp-p (75 Ω) ¡Audio input sensitivity : 2 Vrms ¡Video output signal : Composite video signal, 1.0 Vp-p (75 Ω) ¡Pre-Amp output voltage : 2 Vrms ¡Pre-Amp output impedance : Less than 600 Ω ¡Dimensions (W x H x D) : 178 x 50 x 165 mm ¡Weight : 2.4 kg Front AV input (AV1 IN) ¡Input impedance : 47 kΩ ¡Allowable external input : 2.0 V ¡Connector : 3.5 mmø mini-plug (Equipped with video input terminal) ¡Audio input sensitivity : 2 Vrms ¡Video output signal : Composite video signal, 1.0 Vp-p (75 Ω) USB connector ¡USB standard compatibility : 1.1/2.0 full speed ¡File system : FAT12/16/32 ¡Maximum supply current : 500 mA ¡Playable audio format : MP3/WMA ¡Recommended capacity : Less than 4 GB (1 partition) FM stereo radio ¡Frequency range : 87.9 MHz – 107.9 MHz ¡Usable sensitivity : 12.2 dBf ¡Stereo separation : 30 dB (1 kHz) ¡S/N ratio : 62 dB AM radio ¡Frequency range : 530 kHz – 1 710 kHz ¡Usable sensitivity : 28 dB/µV ¡Image rejection ratio : 50 dB Audio section ¡Output voltage/Impedance : 2 Vrms/600 Ω ¡Frequency characteristics : 20 Hz – 20 kHz (±1 dB) ¡Dynamic range : 96 dB (during CD playback) ¡S/N ratio : 95 dB (during CD playback) Monitor ¡Liquid crystal panel : 7” wide (17.5 cm) ¡Screen dimensions (W x H x D) : 154 x 87 x 177 mm ¡Number of pixels : 336 960 pixels (234 vertical x 480 horizontal x 3) ¡Valid pixel ratio : Over 99.99% ¡Display method : Transparent color filter format ¡Drive method : TFT (Thin Film Transistor) active matrix format Note: ¡Specifications and the design are subject to modification without notice due to improvements in technology. ¡Some figures and illustrations on this manual may be different from your product. Applicable iPod/iPhone Made for. ¡ iPod (5th generation) ¡ iPod nano (1st generation) ¡ iPod nano (2nd generation) ¡ iPod nano (3rd generation) ¡ iPod nano (4th generation) ¡ iPod touch (1st generation) ¡ iPod touch (2nd generation) ¡ iPod classic Works with. ¡ iPhone ¡ iPhone 3G * The applicable models have been confirmed as the end of January 2009. We do not guarantee the operation with our future products or upgraded software. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. ¡ iPod is a trademark of Apple Inc., registered in the U.S. and other countries. ¡ iPhone is a trademark of Apple Inc. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.