Raytec RVi1120 Manuals

Application Drawing RVi1120 120W Power Supply Installation Manual DO NOT OPEN RISK OF ELECTRIC SHOCK CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Midspan Connection The Global Leader in LED Lighting for Security and Saftey www.rayteccctv.com Important Safety Warning - Connect the DC round connector to the input of the RVi2202 AC Connection - Read these instructions. - Keep these instructions. - Heed all warnings. - Follow all instructions. - Do not use this apparatus near water. - Clean only with a dry cloth. - Install in accordance with the manufacturer’s instructions. - This installation should be made by a qualified service person and should conform to all local codes. - DO NOT bundle UTP signal wires in the same conduit as high-voltage wiring. - To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture, dripping or splashing. - No objects filled with liquids, such as vases, shall be placed on equipment. - DO NOT install the unit in a place where the operating ambient tempera- ture exceeds 75° C. - Make sure that the external power supply output voltage is in the recom- mended range. - Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat. - Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. - Only use attachments/accessories specified by the manufacturer. - Unplug this apparatus during lightning storms or when unused for long periods of time. - Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. - The mains plug is used as the disconnect device and shall remain readily operable. WARNING! - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus. WARNING! - This apparatus is a Class I product. This product must be connected to a mains socket outlet through an AC to DC Power supply when using DC input. WARNING! - The mains plug is used as the disconnect device and shall remain readily operable. Network Switch RVi1120 RVi2202 Up to 60W PoE and data VAR-IPPOE-i8-1 VAR-IPPOE-i8-1 The Raytec Model RVi1120 is a universal input AC/DC wall mount power supply. It is designed to work with the most demanding PoE Midspan devices for CCTV applications. It can provide up to 120W at 56V. It is highy reliable with sevearl internal protection circuits including Short Circuit, Overload, Over Volatge and Over Temperature. The RVi1120 is a class I power supply with earth pin. It has a buit-in active PFC circuit. It meets the EISA 2007 Energy Independence and Security Act. - Plug the AC power cord provided with the unit to the mains. The Green LED will indicate the power status. Warning: In order to turn the power supply off unplug the AC power cord from the unit and the mains.