Red Ion APLI Manuals

1 3.80 (96.5) 1.95 (49.5) .3 .1 (2.5) (7.6) 4.20 (106.7) 1.75 (44.5) 3.62 1.77 (45 ) (92 ) +.03 -.00 +.8 -.0 +.02 -.00 +.6 -.0 1638  TWO MULTI-RANGE UNITS COVER: 199.9 µA to 1.999 A, 199.9 mV (DC) 1.999 V to 300 V (DC)  3 1/2-DIGIT, 0.56" (14.2 mm) HIGH LED DISPLAY W/POLARITY  BUILT-IN SCALING PROVISIONS  SELECTABLE DECIMAL POINT LOCATION  AUTO ZEROING CIRCUITS  FRONT PANEL CALIBRATION ADJUSTMENT  OVER-RANGE INDICATION  NEMA 4/IP65 SEALED FRONT METAL BEZEL DESCRIPTION Apollo Volt and Current Meters are premium quality instruments designed for tough industrial applications. With multi-range capability, built-in provision for scaling, and DIP switch selectable decimal points, these units offer the ultimate in application flexibility. The die-cast metal bezel of the Apollo not only enhances the appearance of any panel, it can also be sealed in the front panel for use in wash-down areas and tough, dirty industrial environments. The 3 1/2-digit bi-polar display (minus sign displayed when current or voltage is negative) features 0.56" (14.2 mm) high, 7-segment LED’s for easy reading. Also featured are removable terminal blocks on the rear that facilitate installation wiring and change-outs. SAFETY SUMMARY All safety related regulations, local codes and instructions that appear in the manual or on equipment must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. SPECIFICATIONS 1. DISPLAY: 3 1/2-digit, 0.56" (14.2 mm) high, 7-segment LED, (-) minus sign displayed when current or voltage is negative. Decimal points inserted before 1st, 2nd, or 3rd least significant digits by DIP switch selection. 2. POWER: 115 VAC ±10%, 50/60 Hz, 6 VA. Isolation: 2300 Vrms for 1 min. between input and supply. 3. INPUT RANGES: (Selectable by input and jumper connections.) DC Voltmeter DC Current Meter ±1.999 Volts (basic range) ±199.9 µA ±19.99 Volts ±1.999 mA ±199.9 Volts ±19.99 mA ±300 Volts ±199.9 mA ±1.999 amps ±199.9 mV (basic range) Input Impedance: Voltage: All ranges1MΩ Current: 199.9 µA 1.111 KΩ 1.999 mA 111 Ω 19.99 mA 11 Ω 199.9 mA 1 Ω 1.999 A 0.1 Ω 4. ACCURACY: DC Volts - ±(0.1% of Reading + 1 digit) DC Current 199.9 µA, 1.999 mA, 19.99 mA: ±(0.1% of Reading + 1 digit) 199.9 mA: ±(0.15% of Reading + 1 digit) 1.999 A: ±(0.5% of Reading + 1 digit) 5. OVER-RANGE INDICATION: on all modes is indicated by blanking 3 least significant digits. 6. MAX. VOLTAGE ON BASIC RANGE INPUTS: 75 VDC (Term. 8 to 3 on voltmeter, Term. 9 to 3 on current meter). 7. MAX. VOLTAGE ON TERMINAL BLOCK: 300 VDC (Both voltmeter and current meter). MODEL APLI - APOLLO CURRENT METER & MODEL APLV - APOLLO VOLTMETER DIMENSIONS In inches (mm) Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.1" (53.3) H x 5.5" (140) W. PANEL CUT-OUT CAUTION: Risk of Danger. Read complete instructions prior to installation and operation of the unit. CAUTION: Risk of electric shock. Bulletin No. APLI/V-K Drawing No. LP0123 Released 01/15 Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net