REIZEN 700901 Manuals

Important Notes: 1. This watch is resistant to rain and splashing, but should not be submerged in water. 2. Do not expose watch to extreme heat or freezing temperatures. 3. Do not expose watch to strong static or electromagnetic fields (magnets, etc.) 4. The watch can withstand normal shaking, but is not shock resistant. Dropping or unusually rough handling may cause damage. 5. Do not expose to gasoline, oil, detergents, glue, paint, etc., as damage to the sealing ring, watch case and surface could result. 6. Use only a soft cloth and clear water for cleaning. 7. Some watch models have silk-screened patterns imprinted on the watchband. Be careful not to rub too vigorously or the pattern may be worn off. 8. Do not wear the watch too tightly around your wrist. It is recommended that the watch be loose enough that you can insert a finger under the band. 9. Keep the watch stored in a dry environment when not in use 10. The coating of the watch may fade and scuff under heavy pressure, long term use, abrasion or friction. 11. The resin watchband may show a white shading in use. This powder is not harmful and can be easily wiped away. To extend the life of the watchband, wipe off any dirt or moisture on the band as soon as possible. 12. DO NOT OPEN THE WATCHCASE. The precision electronic parts should be serviced only by an authorized repairperson. If water or smoke gets inside the watch, it should be serviced immediately to avoid corrosion or other damage. 13. Please keep your owner’s manual in a safe place for future reference. Manual for Digital Analog Talking Water-Resistant Watch Choose alarm sound and turn alarm on/off: In time display mode, press B3 [HOUR] button to toggle through alarm sound choices. (Current alarm time will be displayed.) When you reach the desired alarm sound, wait for the watch to return to time display mode. An alarm icon will be displayed on the LCD. To turn the alarm off, toggle through alarm sounds until no sound is heard and the alarm icon disappears from the LCD. Standard Display and Button Functions: Note: Different models have different designs, but all have the same functions and settings. OPERATION: Adjust analog time: Gently pull out the crown, then adjust the exact analog time by turning the crown clockwise. Push the crown in after finishing the adjustment (see diagram above). To set Digital time Press B1 to change the function as follows: TO set time Starting from time display mode, press B1 [MODE] to enter time setting mode. Press B2 [MIN], B3 [HOUR] to adjust minutes and hours respectively to the correct time. TO set Alarm time Starting from time display mode, press B1 [MODE] twice to enter alarm setting mode. AL symbol will display with blinking numerals. Press B2 [MIN], B3 [HOUR] to adjust minutes and hours respectively to the appropriate time.