Response Electronics miGuard RT101 Manuals

The RT101 Plug-in Repeater Unit is designed to increase the transmission range of your alarm system. The Repeater receives the signal from a distant Transmitter (e.g. a PIR or Door/Window Sensor or Remote Control, etc) and re-transmits the signal to your Receiver (e.g. a Control Panel, Solar Siren, etc). The Repeater Unit is suitable for use with any miGuard 433MHz Alarm System. Ideally, the Repeater Unit should be installed mid-way between the Transmitting Device and the Receiver (Control Panel). Description RT101 User Manual Plug-in Wireless Signal Repeater LED Indication Green LED on: working status Blue LED flashes once: signal transmitting Green and blue LEDs flash alternately: in learn/delete mode Extend Transmission Distance Between Accessories and Control Panel When the Repeater Unit is in learn/delete mode, press the learn/delete button, then trigger a Wireless Sensor (e.g. press any button on the Remote Control or trip the Sensor). The blue LED lights up for 2 seconds and goes off, then the Repeater Unit goes back into learn/delete mode and the blue LEDs flash alternately. You can repeat the above operation to add more accessories. Extend Transmission Distance Between Control Panel and Siren When the Repeater Unit is in learn/delete mode, press the learn/delete button. Press the ARM button on the G5 Control Panel, for all other System Control Panels press the SOS Button, successful connection of the Repeater Unit to the Control Panel is made after the blue LED lights up for 2 seconds and goes off, and then the green and blue LEDs flash alternately. Adding and Deleting Accessories When adding or deleting accessories, the Repeater Unit must be in learn/delete mode. Firstly, turn the switch from OFF to ON (if the Repeater is in ON mode, switch it to OFF first and then switch it to ON), the Repeater will enter learn/delete mode for one minute, as indicated when the green and blue LEDs flash in turn. Specifications Power Supply: AC 110V-240V, 50/60Hz Wireless Transmitting Range: ≤300m Wireless Receiving Range: ≤90m Radio Frequency: 315MHz or 433MHz (±75KHz) Static Current: ≤15.5mA Transmitting Current: ≤1.1A Maximum Accessories Supportable: 40 PCS Back-up Battery: 3.7V 600mAh Lithium Battery, 2.22Wh Housing Material: ABS plastic Operation Condition: Temperature:-10°C ~ +55°C Relative Humidity: ≤80% (non-condensing) Dimension(L x W x H): 140x86x87mm Appearance Learn/Delete Button Power ON/OFF Interface for External Antenna Antenna Note: For optimum performance extend the antenna Signal transmitting Workflow: Signal transmitting Control Panel arm/ disarm/alarm Repeater Unit receives signal Siren receives signal Max. distance (in open area)≤ 90m Max. distance (in open area)≤ 300m Note: If the Repeater Unit exits learn/delete mode, switch off and then switch on the Repeater to re-enter the learn/delete mode. Then repeat the above operation to add more accessories. Deleting Accessories When the Repeater Unit is in learn/delete mode, press and hold the learn/delete button for 5 seconds, the Repeater Unit disconnects from all accessories after the blue LED lights up for 2 seconds and goes off. Then the green LED stays on. Signal transmitting Workflow: Signal transmitting Trigger Sensor or activate Remote Control Control Panel receives signal Max. distance (in open area)≤ 90m Max. distance (in open area)≤ 300m Repeater Unit receives signal