Ricoh FT8680 Manuals

IMPORTANT SAFETY NOTICES PREVENTION OF PHYSICAL INJURY 1. While the machine warms up, it will suddenly start turning to perform the process control data initialization. Keep hands away from any mechanical and electrical components during this period. 2. Before disassembling or assembling parts of the copier and peripherals, make sure that the copier and the second sorter power cord is unplugged. 3. The wall outlet should be near the copier and easily accessible. 4. Note that some components of the copier, the paper tray unit, and the 2nd sorter are supplied with electrical voltage even if the main switch is turned off. 5. If any adjustment or operation check has to be made with exterior covers off or open while the main switch is turned on, keep hands away from electrified or mechanically driven components. 6. The inside and the metal parts of the fusing unit become extremely hot while the copier is operating. Be careful to avoid touching those components with your bare hands. HEALTH SAFETY CONDITIONS 1. Never operate the copier without the ozone filters installed. 2. Always replace the ozone filters with the specified ones at the specified intervals. 3. Toner and developer are non-toxic, but if you get either of them in your eyes by accident, it may cause temporary eye discomfort. Try to remove with eye drops or flush with water as first aid. If unsuccessful, get medical attention.