Brother FAX-2950 Quick Setup Manual

MFC-7290 Quick Setup Guide ARL/ASA/NZ/GLF Version 0 Please read the Product Safety Guide first, then read this Quick Setup Guide for the correct setup and installation procedure. To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/. 1 Unpack the machine and check the components  This machine must be grounded, If in doubt, call a qualified electrician.  To ensure safe operation t ...

plastic bags away from babies and children. Plastic bags are not toys. CAUTION CAUTION When moving the machine, grasp the side handholds firmly from the front of the machine. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION indicates a potentially hazardous situation which, ...

material from the machine a Remove the packing tape from the outside of the machine. b Open the front cover. c Remove the Silica Pack from the inside of the machine. CAUTION CAUTION DO NOT eat the silica gel pack. Please throw away. If ingested, seek medical attention immediately. d Lift the elastic band off the drum. e Pull the paper strip to remove the protective material as shown in the illustration. f Take out the drum unit and t ...

to distribute the toner evenly inside the assembly. h Put the drum unit and toner cartridge assembly back in the machine. i Close the front cover of the machine. 3 Attach the ADF Document Output Support a Unfold the ADF Document Support. b Open the control panel cover by lifting it toward the back. Control Panel Cover ...

d Close the control panel cover. 4 Install the Handset a Connect the curled handset cord to the machine and the other end to the handset. 5 Load paper in the paper tray a Pull the paper tray completely out of the machine. b While pressing the green paper-guide release lever a, slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots. 1 ...

and misfeeds. d Put paper in the tray and make sure:  The paper is below the maximum paper mark (b b b) a. Over filling the paper tray will cause paper jams.  The side to be printed on must be face down.  The paper guides gently touch the sides of the paper so it will feed correctly. e Put the paper tray firmly back in the machine. Make sure that it is completely inserted into the machine. f Unfo ...

and telephone line a Connect the AC power cord to the machine, and then plug it into an electrical socket. b Turn the machine’s power switch on. c Connect the telephone line cord. Connect one end of the telephone line cord to the socket on the machine marked LINE and the other end to a telephone wall socket. WARNING The machine must be grounded using an earthed plug. Since the machine is grounded through the electrical socket, ...

This procedure may not be available, depending on the model of your machine. In this case, proceed to the next step. You must set your country so that the machine works correctly on local telecommunication lines in each country. a Check that the power is turned on by plugging in the power cord and turn the power switch on. Press OK. Set Country Press OK Key b Press a or b to select your country (Australia, New Zealand, South Africa, Tu ...

There are four possible receive modes: Fax Only, Fax/Tel, Manual and External TAD. a Press Menu, 0, 1. b Press a or b to choose the receive mode. Press OK. c Press Stop/Exit. 9 Set the LCD contrast (if needed) If you are having difficulty reading the LCD, try changing the contrast setting. a Press Menu, 1, 5. b Press c to increase the contrast. —OR— Press d to decrease the contrast. Press OK. c Press Stop/Exit. 10 Set the date ...

The machine displays the date and time, and if you set up the Station ID, it will add it to each fax you send. a Press Menu, 0, 3. b Enter your fax number (up to 20 digits) on the dial pad, and then press OK. Station ID Fax: c Enter your telephone number (up to 20 digits) on the dial pad, and then press OK. If your telephone number and fax number are the same, enter the same number again. Station ID Tel: d Use ...

type (Middle East and Africa only) If you are connecting the machine to a line that features a PABX (PBX) or ISDN to send and receive faxes, it is also necessary to change the phone line type accordingly by completing the following steps. a Press Menu, 0, 6. b Press a or b to choose PBX, ISDN or Normal. Press OK. Do one of the following:  If you choose ISDN or Normal, go to step f.  If you choose PBX, go to step c. c Do o ...

(Oceania and Asia only) You can set the machine to change for Daylight Saving Time. If you choose On, it will reset the time forward one hour and if you choose Off, it will reset the time backward one hour. a Press Menu, 0, 2, 2. b Press a or b to choose On or Off. Press OK. c Press 1 or 2 to choose 1.Change or 2.Exit. d Press Stop/Exit. 18 Automatic Daylight Savings Time (Middle East and Africa only) You can set the machine ...

These installation instructions are for Windows® XP Home/Windows® XP Professional, Windows® XP Professional x64 Edition, Windows Vista®, Windows® 7, and Mac OS X (versions 10.5.8, 10.6.x, 10.7.x). Note • You can visit us at http://solutions.brother.com/ where you can get product support, the latest driver updates and utilities, and answers to frequently asked questions (FAQs) and technical q ...

(Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7) 20 Before you install a Make sure that your computer is ON and you are logged on with Administrator rights. b Turn off the machine and make sure the USB interface cable is NOT connected to the machine. If you have already connected the cable, disconnect it. 21 Install MFL-Pro Suite a Put the installer CD-ROM into your CD-ROM drive. If the model name ...

marked with the symbol on your machine and then connect the cable to your computer. f Turn the machine on. The installation will automatically start. Follow the on-screen instructions. g When the On-Line Registration screen appears, make your selection and follow the on-screen instructions. Once you have completed the registration process, click Next. h When the Setup Complet ...

20 Before you install a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. b Connect the USB cable to the USB port marked with the symbol on your machine and then connect the cable to your Macintosh. c Make sure your machine’s power switch is on. 21 Install MFL-Pro Suite a Put the installer CD-ROM into your CD-ROM driv ...

Presto! PageManager When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. a On the Brother Support screen, click Presto! PageManager and follow the on-screen instructions. Finish The installation is now complete. ...

the Brother CreativeCentre icon on your desktop to access our FREE web site with many ideas and resources for personal and professional use. This icon appears after installing MFL-Pro Suite or the optional software available from the Brother Solutions Center. Mac users can access Brother CreativeCentre at this web address: http://www.brother.com/creativecent ...

more information about the consumables for your machine, visit us at http://www.brother.com/original/ or contact your local Brother reseller. Toner cartridges Drum unit Standard Toner: TN-2230 (For Oceania), TN-2260 (For Asia, Middle East and Africa) High Yield Toner: TN-2250 (For Oceania), TN-2280 (For Asia, Middle Ea ...

Brother is a registered trademark of Brother Industries, Ltd. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh, and Mac OS are trademarks of Apple Inc., registere ...