Riello UPS NetMan 204 Manuals

QUICK REFERENCE INSTALLATION MANUAL NETWORK ADAPTER DESCRIPTION NetMan 204 is a device that allows UPS management through a LAN (Local Area Network); the accessory supports all the main network protocols (SNMP v1 and v3, TCP/IP, HTTP and so on) and is compatible with Ethernet 10/100Mbps IPv4/6 networks. The UPS can therefore be integrated easily into medium and large-sized networks. The device also records UPS values and events in the history log archive and can manage optional environmental sensors (not supplied with the device, but provided separately) NOTE: for the comprehensive user manual refer to the CD-ROM supplied. FRONT PANEL A: Network port B: Led C: Reset button D: Micro-USB port E: Serial port Network port NetMan 204 connects to 10/100 Mbps Ethernet networks by means of connector RJ45. The LEDs built into the connector describe the status of the network: · Left LED: SOLID YELLOW: NetMan204 has detected a valid link. FLASHING YELLOW: NetMan204 is receiving or transmitting data packets. · Right LED SOLID GREEN: NetMan204 is connected to a network operating at 100 Megabits per second. Micro-USB port NetMan 204 makes available an USB communication port through which it is possible to configure it (see paragraph “Configuration via USB”). Serial port NetMan 204 makes available a serial communication port to which you can connect environmental sensors (not supplied with the device, but provided separately) or a modem (not supplied with the device) for UPS teleservice. Led This led describes the status of NetMan 204: · SOLID RED: NetMan 204 is not communicating with the UPS (verify PRTK Code). · FLASHING RED: the DHCP server does not have assigned a valid IP address to NetMan 204. · OFF: regular working. Reset button The reset button allows to restart the NetMan204 or to load a default configuration with a predefined static IP address. To reset NetMan204: keep press the reset button until the red led start flashing (ca. 2 seconds) and then release it. To load a configuration with predefined static IP address: keep press the reset button; first the led starts flashing, then turns to solid red (ca. 10 seconds). When the led is solid red, release the reset button and the NetMan 204 will reboot with: · IP address:� 192.168.0.204 · Netmask:� 255.255.0.0 · SSH service enabled · HTTP service enabled HTTP and SSH service are enabled temporarily without changing the configuration saved in non-volatile memory. 100Mb Username Default password Privileges admin admin user with right to modify the configuration fwupgrade fwupgrade user with right to upgrade the firmware user user user with right to read and download the log files USERS It is possible to access to NetMan 204 with three different users (admin / fwupgrade / user).