Rimage Professional 5300N Manuals

Rimage Operator Parts List Table of contents Producer Family.................................................................................................................1 Producer III – 7100, 8100, 7100N, and 8100N.............................................................................. 1 Producer II – Autostar II, Protégé II, Amigo II, AutoPrinter II.....................................................1 Professional / DiscLab Family..........................................................................................2 Professional 5100N ....................................................................................................................... 2 Professional 5300N ....................................................................................................................... 2 DL/DLN5200.................................................................................................................................. 2 Endeavor/DiscLab ......................................................................................................................... 2 Printer Family.....................................................................................................................3 Everest II & Everest III................................................................................................................... 3 Prism ............................................................................................................................................. 3 Rimage 480i .................................................................................................................................. 3 Desktop Family ..................................................................................................................4 Rimage 360i .................................................................................................................................. 4 Rimage 2000i ................................................................................................................................ 4 112156_S Rimage Confidential – Do Not Distribute. *All prices are in USD and are subject to change without notice. Rimage Certified Replacement Parts List Producer Family Producer III - 7100, 8100, 7100N, and 8100N 8100 8100N 7100 7100N Part Number Name Additional Information Doc # *MSRP x x 3000253 Adhesive back bumper 8100/8100N only, round bumper 2000183 $ 3.84 x x 3000216 Bin full sensor 8100/8100N only 2000153 $ 7.86 x x x x 501357-001 Carousel 2000538 (User Guide) $ 62.91 x x x x 3000219 Carousel sensor 2000155 $ 5.20 x x 304882-001 Door 7100/7100N N/A $ 250.00 x x 304885-001 Door 8100/8100N N/A $ 243.00 x 3000203 Embedded module 7100N with Prism (945) 112183-001 $ 2,607.00 x 3000369 Embedded module 7100N with Prism (965) 112183-001 $ 3,263.00 x 3000204 Embedded module 7100N with Everest (945) 112183-001 $ 2,607.00 x 3000370 Embedded module 7100N with Everest (965) 112183-001 $ 3,263.00 x 3000205 Embedded module 8100N with Prism (945) 112183-001 $ 2,878.00 x 3000371 Embedded module 8100N with Prism (965) 112183-001 $ 3,255.00 x 3000206 Embedded module 8100N with Everest (945) 112183-001 $ 2,895.00 x 3000372 Embedded module 8100N with Everest (965) 112183-001 $ 3,262.80 x x x x 3000207 Gripper (picker) board assembly 2000246 $ 624.00 x x 3000387 Hard drive set 7100N & 8100N, Replaced as a set 2000110 $ 391.00 x x x x 3000209 Operator panel LCD display 2000021 $ 115.86 x x 3000301 PCI card, IEEE 1394b 7100 & 8100, FireWire, for control center 2000611 $ 69.00 x x 3000260 Recorder - CD/DVD 7100 & 8100, 16x DVD (5170) 112167-001 $ 193.00 x x 3000212 Recorder - CD/DVD 7100N & 8100N, 16x DVD (760) 112180-001 $ 124.50 x x 3000515 Recorder - CD/DVD - Quick-release 7100 & 8100 (5170) Replacement 2000732 $ 176.00 x x 3000514 Recorder - CD/DVD - Quick-release 7100N & 8100N (5170), Replacement 2000770 $ 140.00 x x 3000517 Recorder - Blu-ray 7100N & 8100N Blu-ray (BDR202), replacement 2000770 $ 830.50 Producer II - Autostar II, Protégé II, Amigo II, and AutoPrinter II Autostar II Protégé II Amigo II AutoPrinter II Part Number Name Additional Information Doc # *MSRP x x x 3000331 Adhesive back bumper small, square bumper 2000183 $ 1.10 x x x x 501357-001 Carousel Autostar/Protégé: 110629-001 Amigo: 110654-001 Autoprinter: 110656-001 (User Guides) $ 62.91 x x x x 3000219 Carousel sensor 2000155 $ 5.20 x x x x 3000207 Gripper (picker) board assembly 2000246 $ 624.00 x x x x 3000319 PCI card, IEEE 1394/IDT FireWire, for control center 2000186 $ 38.00 x x x 210787-013 Recorder - CD/DVD 8x DVD (106/708) 112043-000 $ 209.00 x x x 210787-011 Recorder - CD 52x CD-R (Premium) 112043-000 $ 92.50 x x x 3000335 Recorder - CD/DVD (5170), 1394a nonquick-release (5170) 112043-000 $ 187.80 x 3000640 Recorder - CD/DVD - Quick-release Amigo II only replacement Quick-release (5170) 2000765 $ 199.50 Operator Level Parts Operator Level Parts 112156_S Rimage Corporation Confidential - Do Not Distribute. *All prices are in USD and are subject to change without notice. 1 Rimage Certified Replacement Parts List Professional / DiscLab Family Professional 5100N Part Number Name Additional Information Doc # *MSRP 2000551 Door N/A $ 271.00 3000245 Hard Drives Replaced as a set 2000509 $ 267.50 304929-102 Input bin 2000447 (User Guide) $ 4.20 3000621 Pivot Tray Part of collator 2000762 $ 1.08 3000252 Recorder 16x DVD (760) 2000515 $ 147.00 3000518 Recorder 16x DVD (5170) 2000515 $ 128.50 3000516 Recorder - Blu-ray Replacement (BDR202) or upgrade 2000515 $ 830.50 Professional 5300N Part Number Name Additional Information Doc # *MSRP 3000240 Bin full sensor 2000516 $ 8.00 3000241 Bin Present Sensor 2000516 $ 5.00 304592-001 Door N/A $ 240.50 3000245 Hard Drives Replaced as a set 2000509 $ 267.50 304929-102 Input bin 2000447 (User Guide) $ 4.20 3000621 Pivot Tray Part of collator 2000762 $ 1.08 3000252 Recorder 16x DVD (760) 2000515 $ 147.00 3000518 Recorder 16x DVD (5170) 2000515 $ 128.50 3000516 Recorder - Blu-ray Replacement (BDR202) or upgrade 2000515 $ 830.50 DL/DLN5200 Part Number Name Additional Information Doc # *MSRP 304842-001 Door Front panel N/A $ 52.50 304783-001 Input bin Disc input caddy 110768-000 (User Guide) $ 3.12 3000314 Operator Panel LCD display 2000281 $ 78.00 3000319 PCI card, IEEE 1394/IDT DL5200 FireWire, for control center 2000186 $ 38.10 3000621 Pivot tray Part of collator 2000762 $ 1.08 3000337 Recorder - CD/DVD 16x DVD (760) 2000122 $ 128.00 3000338 Recorder assembly 52X CD-R (Premium) 2000122 $ 127.00 3000513 Recorder - CD/DVD Recorder (5170) 2000122 $ 121.00 3000623 USB hub DL5200 2000775 $ 13.00 Endeavor/DiscLab Part Number Name Additional Information Doc # *MSRP 304783-001 Input bin Disc input caddy 110747-000 (User Guide) $ 3.12 626436-403 Operator Panel LCD display 2000281 $ 78.00 3000621 Pivot tray Part of collator 2000762 $ 1.08 501261-003 Recorder - CD/DVD 8x DVD (106/708) 2000122 $ 201.40 501210-052 Recorder - CD 52x CD-R (Premium) 2000122 $ 85.10 Operator Level Parts Operator Level Parts Operator Level Parts Operator Level Parts 112156_S Rimage Corporation Confidential - Do Not Distribute. *All prices are in USD and are subject to change without notice. 2

Copyright © 2007 Rimage Corporation 2000584_B Replace the Printer on a Rimage Autoloader OR USB Cable Printer Power Cord Printer Cable Printer Cable Printer Power Cord USB Cable If your Rimage autoloader has a printer cover, remove the cover. For packing instructions, refer to one of the following documents: From the back of the printer disconnect the following cables: Printer cable Printer power cord USB cable • • • 1 Access the printer. 4 Pack the printer for shipping. Before you begin: 1. Stop or pause all jobs. 2. Power off the control center (external or embedded). 3. Power off the Rimage autoloader. 4. Disconnect the power cord from the power outlet. Everest printer Prism printer Caution: Some cables in your system may be latched. Equipment damage may occur if cables are not disconnected appropriately. 2 Disconnect the cables. 3 Remove the printer from the autoloader. Lift the printer up and off the autoloader. Caution: Lift the Everest printer with care; it is very heavy. Pack the Rimage Everest II™ Printer (110891-001) Pack the Rimage Everest III™ Printer (110877-001) Pack the Rimage Prism™ Printer (112143-001) These documents are available at www.Rimage.com/Support.html. Navigate: Product Family > Support - Product > Documents tab. Refer to the label on the box of your replacement printer. 5 Unpack the replacement printer.  Note: The term “autoloader” is used throughout this document to refer to the following Rimage products: AutoPrinter II™, Endeavor/Disclab™, DLN5100™, DL5200™, DLN5200™, 5100N™, 5300N™, Autostar II™, Protégé II™, Amigo II™, Producer 7100™, Producer 8100™, Producer 7100N™, and Producer 8100N™. 2000584_B Copyright © 2007 Rimage Corporation USB Cable Printer Power Cord Printer Cable Printer Cable USB Cable Printer Power Cord Slots Printer Plate Place the printer on your Rimage autoloader so that the printer feet slide into the slots on the printer plate. 6 Place the printer on the Rimage autoloader. If your new printer is an Everest III, follow the prompts in the New Hardware Wizard to add the printer to your list of available printers. 10 Install the printer driver (Everest III only). OR At the back of the printer connect the following cables: Printer cable Printer power cord USB cable • • • Everest printer Prism printer 7 Connect the cables. Refer to the instructions in the user guide that was included with your Rimage autoloader. User guides are also available at www.Rimage. com/Support.html. Navigate: Product Family > Support - Product > Documents tab. Your Rimage autoloader is ready for use. 12 If necessary, align the printer to the Rimage autoloader. a. Connect the autoloader power cord to the power outlet. b. Press the autoloader power switch to power on the system. 8 Power on the Rimage autoloader. 9 If your printer was shipped to you with a Rimage software disc, install the software on the embedded or external control center.  Important! Be sure to uninstall any previous Rimage software before installing your new software. Install the Rimage software. Install the latest autoloader or AutoPrinter firmware. Firmware and instructions are available at Rimage.com/Support.html. Navigate: Product Family > Support - Product > Downloads tab.  Important! If you are replacing a Prism printer with an Everest III printer, refer to the Updating Printer Firmware using Gemini Utilities document (PN 2000759) included with your new printer. 11 Update the autoloader or AutoPrinter firmware.

Professional Family™ Operator 2000762_A © 2007, Rimage Corporation 1 Replace a Collator Pivot Tray on a Rimage Professional or DiscLab System Use this procedure to replace a collator pivot tray on a Rimage 5100N™, Rimage 5300N™, DL5200™, DLN5200™, and DiscLab™. Rimage approved parts must be used for this process. The product warranty may become void if parts not approved by Rimage are used; equipment or parts are tampered with, misused, neglected, or modified in any respect without the written consent of Rimage.  Notes: • The photos in this document are of any of the listed products. Your system may not look exactly like the system pictured. • The term “Rimage System” is used throughout this document to refer to the 5100N, 5300N, DL5200, DLN5200, and DiscLab. Before you begin 1. Stop or pause all jobs. 2. Power off the external or embedded control center. 3. Power off the Rimage System. 4. Disconnect the power cord from the power outlet. # Required tools: • None required Replace the collator pivot tray 1. While slightly bending the collator pivot tray, remove the tabs from the holes. 2. Insert one tab on the replacement collator pivot tray into the hole on the collator. - Important! The side with the ridge must face up. 3. While slightly bending the collator pivot tray, insert the second tab in the second hole on the collator. 4. Repeat steps 1 – 3 for any additional collator pivot trays. Collator Pivot Tray Holes Ridge Tab Tab Support information Europe When you contact Rimage Services, please provide: Contact Rimage Services Europe: www.rimage.com/support.html Email: [email protected] Tel: +49-(0) 6074-8521-0 • Unit serial number and software version. • Functional and technical description of the problem. • Exact error message received. US, Asia/Pacific, Mexico/Latin America Contact Rimage Services: www.rimage.com/support.html Email: http://www.rimage.com/support_form.cfm Tel: North America: 800-553-8312 Asia/Pacific, Mexico/ Latin America: 952-946-0004 Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes.

Enterprises around the world – including two-thirds of all Fortune 100 companies – rely on Rimage disc publishing systems to streamline workflow, reduce inventories and publish unique content on-demand for a wide range of applications. Now the renowned Rimage quality and performance preferred by the world’s leading companies is available in a compact all-in-one solution designed specifically for front office settings – the Rimage Professional Series. On-demand burning and printing of CD/DVD and Blu-ray Discs™ enable a wide variety of professional applications, including medical imaging, financial data archiving, video production, photo processing and much more. Rimage Professional Series solutions can be deployed in a number of front office scenarios, including: • Video editing house or post-production studio • K-12 school district or university • Mid-sized house of worship • Law enforcement setting • Audio or video content distributor • Corporate information technology (IT) department The Rimage Professional Series is ideal for one or more users to create discs with the convenience of an intelligent network appliance with professional print quality and hands-off operation. Designed for publishing hundreds of discs per day, with double the speed and throughput of competitive systems, the Rimage Professional Series provides unmatched performance and reliability for maximum uptime. Start publishing professional CDs, DVDs and Blu-ray Discs today with the Rimage Professional Series. The Rimage Professional ™ Series A High-Performance Solution for the Front Office Embedded control center Rimage Professional Series systems include a powerful integrated embedded computer, eliminating the need for an external host computer system and minimizes setup time. Hardware installation is as simple as plugging in a single Ethernet cable. Dependable Rimage hardware and robotics Equipped with a single recorder and input bin, the Professional 5100N offers higher reliability and performance than desktop products. The 5300N has all the features of the 5100N plus dual recorders and dual input bins to provide even better performance, enabling the use of two different media types at the same time without user intervention. Both systems deliver the industry’s highest throughput and lowest cost-per-disc in its class and feature time-tested Rimage robotic automation for years of trouble-free use. Small Footprint – Big Features The Rimage Professional 5300N and 5100N offer customers a step up from inefficient desktop disc burning systems and provides compact, user-friendly systems for front office applications that are designed to save you time and money. You can also replace costly third-party disc production with a proven turnkey in-house disc publishing solution. Furthermore, an extensive network of solution partners expands the versatility of Rimage technologies by integrating digital asset management, content delivery, archiving, web fulfillment and other information publishing processes for a fully integrated disc publishing solution. The Rimage Producer software suite provides exclusive applications and features that businesses need to kick- start a successful in-house disc publishing operation. The suite includes QuickDisc™ software for creating and submitting jobs, CD Designer™ to help users create custom labels and disc graphics and Rimage System Manager™ to monitor and control the Rimage hardware automatically, notifying users over the network of configuration, job status, consumable levels and more. Key software features include: Rimage Disc Spanning™ Rimage’s exclusive disc spanning feature lets users record large data sets over virtually any number of CD or DVD discs. Each disc is automatically ordered, numbered and written with a simple application to re-join files from any PC, no matter what software is locally available. Rimage Adaptive Streaming™ This patented technology automatically processes and optimally caches files to enhance performance, giving Rimage disc publishing systems the fastest first-disc-out speeds in the industry. Rimage Video Protect™ Rimage customers can trust Rimage Video Protect to provide a solid barrier against unauthorized duplication of video DVDs. The application is tightly integrated into the Rimage software suite, ensuring seamless execution and streamlined workflow. Rimage SDK and Rapid API™ As part of its software suite, Rimage also provides developers with a robust software development kit (SDK) and application programming interface (API), to simplify integration of workflow applications with Rimage systems. The Rimage Rapid API streamlines the integration process and turns days of development into just hours. WAT E R M A R K C A M E R A A S S E T M A N A G M E N T P R E - R E L E A S E D I S C Watermarking Sealed, Protective, Scratch-resistant Thermal Retransfer Layer Thermal, Printable Rimage Discs CMY high- resolution ribbon transfer (also available in Black) Thermal Retransfer Process Rimage’s Everest™ state-of-the-art thermal retransfer printing system delivers waterproof, scratchproof, photo-realistic images that are permanently printed and bonded directly to the surface of the disc. These full-color discs are the industry’s most durable printed discs and will not scratch, peel or fade over time. Compared to inkjet-based systems, the Everest printer is faster and has a lower cost per disc when printing full-color labels. Why do this? When you can do this? Exclusive Everest™ thermal direct-to-disc printing Rimage Producer™ Software – Limitless Possibilities

DiscLab™ Operator 2000509_B © 2007, Rimage Corporation 1 Replace the Hard Drives on a Rimage 5100 or Rimage 5300N Use this procedure to replace the hard drives as a set on a Rimage 5100N™ and Rimage 5300N™. The procedures in this document should be performed only by personnel trained and authorized by Rimage. The instructions and content are written for mechanical and electrical service work assuming the technician has such training and authorization. The product warranty may become void if equipment or parts are tampered with, misused, neglected, or modified in any respect without the written consent of Rimage or by technicians who are not authorized or certified by Rimage. - Important! The hard drives must be replaced as a set. Before you begin 1. Stop or pause all jobs. 2. Power off the embedded control center. 3. Power off the system. 4. Disconnect the power cord from the power outlet. # equired tools: R • Phillips or flathead screwdriver (5100N only) Remove the hard drives 1. At the left side of the 5100N, loosen the screws (Qty. 2) on the left side cover. OR At the rear of the 5300N, loosen the thumbscrew (Qty. 1) on the hard drive cover. 2. Remove the left side cover (5100N) or hard drive cover (5300N). 5100N Left Side Cover Hard Drive Cover 5300N 3. Remove the hard drives. a. Insert your thumb and finger into the tabs on the hard drive. b. Squeeze the tabs together. c. While squeezing the tabs, pull the hard drive out of the system. d. Repeat steps a – c for the second hard drive. Hard Drive 5100N 5300N Replace the Hard Drives on a Rimage 5100 or Rimage 5300N Install the hard drives 1. Hold a replacement hard drive so that the label on the top of the hard drive faces the front of the system (5100N) or the power supply (5300N - toward the right when looking at the unit from the rear). 2. Gently insert the hard drive all the way into hard drive bay 0. Tips: • Press on the hard drive, not on the tabs, to insert the hard drive. • The hard drive is installed when it snaps into place. 3. Hold the second replacement hard drive so that the label on the top of the hard drive faces the front of the system (5100N) or the power supply (5300N - toward the right when looking at the unit from the rear). 4. Gently insert the hard drive all the way into hard drive bay 1. 5. Position the left side panel (5100N) or the hard drive cover (5300N) on the unit. 6. Tighten the screws (Qty. 2, 5100N) or the thumb screw (Qty. 1, 5300N) to secure the cover. 7. Connect the power cord. 8. Run the recovery disc(s). Refer to the instructions included with your recovery disc(s). The system is ready for use. Support information Europe When you contact Rimage Services, please provide: Contact Rimage Services Europe: www.rimage.com/support.html Email: [email protected] Tel: +49-(0) 6074-8521-0 • Unit serial number and software version. • Functional and technical description of the problem. • Exact error message received. US, Asia/Pacific, Mexico/Latin America Rimage Corporation reserves the right to make improvements to the Contact Rimage Services: equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this www.rimage.com/support.html publication and to make changes from time to time in the content hereof Email: http://www.rimage.com/support_form.cfm without obligation of Rimage Corporation to notify any person or Tel: North America: 800-553-8312 organization of such revisions or changes. Asia/Pacific, Mexico/ Latin America: 952-946-0004 2000509_B © 2007, Rimage Corporation 2

1 2000447_E Rimage Professional 5100N and 5300N Maintain the Professional Use the information in this section to keep your Professional in optimal operating condition. , Warning! Always power off the autoloader and unplug the power cord before you access the embedded PC. Overview Regular preventative maintenance of your Professional can help to ensure error-free recordings and clean printed labels. Maintenance involves cleaning the system and aligning the Everest printer on top of the autoloader. � Note: The Everest printer has its own maintenance requirements. Refer to your Rimage Everest User Guide for information. Cautionary Information n Caution: To avoid damaging the Professional during maintenance: • Never use oils, silicone, or other lubricants on any part of the Professional. • Use only non-abrasive cleaners to wipe down the surfaces of your Professional. • Never use cleaners to clean the embedded PC. • Avoid pouring cleaners directly onto the Professional. Instead, apply the cleaner to the cloth first. • Observe precautions for electrostatic-sensitive devices whenever you access the embedded PC. English 2000447_E 2 Maintain the Professional Preventative Maintenance Schedule Use the following table as a guideline for how often to perform preventative maintenance tasks. � Note: Your system may require more frequent maintenance if used in a dusty area, such as a store or warehouse. Before you begin: 1. Power off the Professional. 2. Disconnect the power cord. - Important! Failure to follow the maintenance schedule outlined below may void your warranty. Tool Task Frequency Lint-free cloth Non-abrasive, all- purpose cleaner Wipe down all surfaces of the autoloader, including: • Sides and top • Input bins • Output trays • Output bin • Base (remove the input bin first) • Top surface on the lift arm Weekly Can of compressed air Remove dust and debris from the fans at the back of the autoloader. Monthly Vacuum Remove dust and debris from the openings at the back of the autoloader. Monthly Can of compressed air Remove the side panels and remove all dust from the embedded PC. Monthly Torx T25 driver Align the Everest printer. Refer to the Align the Printer section in the Rimage Professional User Guide. On installation and as needed English

USB Cable Printer Power Cord Printer Cable Keyboard* Mouse* Monitor* Power Switch Power Cord Network Cable Copyright © 2008 Rimage Corporation 2000504_B Replace the Rimage Professional Autoloader Before you begin: 1. Stop or pause all jobs. 2. Power off the embedded control center. 3. Power off the Professional. 4. Disconnect the power cord from the Professional. b. Remove the .printer from the Professional and set it aside. a. From the back of the printer disconnect the cables. Caution: Some cables in your system may be latched. Equipment damage may occur if cables are not disconnected appropriately. Caution: Lift the Everest printer with care. It is very heavy. *A monitor, keyboard, and mouse are required only if the system is not connected to a network. Remove the printer. Disconnect the cables. Exchange the hard drives in the two Professionals. (Optional) Unpack the replacement Professional. Use this procedure to set up your replacement autolaoder when you are completing a rapid exchange. The term ‘Professional’ is used throughout this document to refer to the Rimage 5100N and the Rimage 5300N. ✎ Note: Your system may not look exactly like the system pictured. a. Open the box. Refer to the instruction label on the outside of the box. b. Remove the contents from the box. Refer to the instruction label on the inside flap of the box. Note:   Perform this step only if you want to keep your original hard drives for use in the replacement Professional. a. Remove the hard drives from the Professional to be returned. Tip: Refer to Replace the Hard Drives on a Rimage 5100N or Rimage 5300N (2000509) shipped with your replacement Professional. This document is also available at www.Rimage.com/Support.html. Navigate: Professional Family > Support - Product > Documents tab. b. Remove the hard drives from the replacement Professional. c. Install the hard drives from the Professional to be returned into the replacement Professional. d. Install the hard drives from the replacement Professional into the Professional to be returned. 4 1 2 3 Tape Tape Foam Tape Tape Tape Tape Foam Copyright © 2008 Rimage Corporation 2000504_B Complete the steps in the Professional Setup & Installation (2000448) included with your product. This document is also available at www.Rimage.com/Support.html. Navigate: Professional Family > Support - Product > Documents tab.  Note: You are installing the same Everest printer that you removed from the Professional. Set up the replacement Professional. Prepare the Professional to be returned. Refer to the packing instructions included with your replacment Professional. The instructions are also available at www.rimage.com/support.html. Navigate: Professional Family > Support - Your Product > Documents. Pack the Professional to be returned. b. Inside the 5300N, install the the .foam (5300N only). c.. Inside the 5100N, use .tape to secure the input bin (5100N only). d. Use the. tape to secure the collator. a. Use .tape to secure the printer cords to the back of the autoloader. e. Place the .protective foam strip behind the front door. f.. Use .tape to secure the front door. 5100N 5300N 7 5 6

2000448_D Copyright © 2008 Rimage Corpo Rimage Professional™ 5100N and 5300N Setup and Installation Guide Continued on next pa Slots Printer Plate Prepare the Professional. d. Inside the Professional, remove the foam (5300N only). e. Remove the tape from input bin (5100N only). f. Remove the tape from the collator. g. Remove the tape holding the printer cords on the back of the autoloader. Important! Read the label before you remove it. - a. Remove the tape from the front door. b. Remove the Software Agreement label from the front door. Before you begin: This document is intended for people who are familiar with hardware setup, software installation, and Windows operating systems. If you do not understand the procedures in this document, ask your computer technician for help. The Rimage 5100N and 5300N are part of the Rimage Professional series of autoloaders. Through this document, the term ‘Professional’ is used to refer to both the Rimage 5100N and the Rimage 5300N.  Note: Your system may not look exactly like the system pictured. For information about how to connect the system to a network, refer to the Advanced Setup Guide (110721) provided with your autoloader. a. Press the side cover latches. b. Lower the side cover. Prepare the Everest printer. c. Inside the Professional, remove the protective foam strip. c. Open latches 1, 2, and 3 as indicated by the arrows. d. Remove the plastic packing pieces (2) from inside the printer. Set up your printer. Place the printer on the Professional so that the feet slide into the slots on the printer plate. ,Caution: Lift the Everest printer with care; it is very heavy. Important! Keep all packaging materials. - 1 2 3 Tape Tape Label Foam Tape Foam Tape Tape 5100N 5300N Tape Latch 1 Side Cover Latches Plastic Packing Pieces Latch 3 Latch 2 20004 Copyright © 2008 Rimage Corporation Important! Do not power on the Professional until you are instructed to do so. - a. Connect the power cord from the Professional to the printer. c. Connect the USB cable to the printer. b. Connect the printer cable to the printer. Learn more. For information about how to operate and maintain the Professional, refer to the Rimage 5100N and 5300N User Guide included with your product. For additional support and product information, go to www.rimage.com/ support.html. Confi gure the Professional and add clients. Test and verify. Run a 3-disc test job to verify that the system is operating correctly. • If the system is connected to a network, access is made through Microsoft Remote Desktop Connection running on a separate PC. See the Advanced Setup Guide (110721) for more information on accessing Remote Desktop Connection.  Note: If there is more than one Professional on the network, change the computer name. See the Advanced Setup Guide (110721) for more information. • If you connected a monitor, keyboard, and mouse, log into the Rimage Professional with the following username and password: Username: Administrator Password: password Activate your Rimage Software. You have 30 days to activate your Rimage software. Until your software is activated, you will be prompted to activate your software each time you use the Rimage software. When the activation dialog displays, select an option and follow the on-scree prompts to activate your software. Important! Rimage recommends that your Network Administrator use these instructions as a guide to complete the confi guration and software installatio - Align the printer. For instructions on how to align your printer, refer to the Rimage 5100N and 5300N User Guide included with your product. Connect the printer cables. Connect the Professional cables. a. Be sure that the main power switch at the back of the 5000N is in the Off position. b. Connect the power cord from the Professional to a power outlet. c. Connect the network cable to the embedded control center. d. Connect a monitor, mouse, and keyboard (optional). *A monitor, keyboard, and mouse are required only if the system is not connected to a network. Power on the Professional. a. Set the main power switch at the back of the Professional to the On position. b. Press the embedded control center power button on the front of the Professional to power on the system.  Note: Initialization may take up to 5 minutes. When the Professional completes the initialization, the operator panel displays [RIMAGE 5000N READY]. c. Allow the system to complete initialization. Install the printer Follow the prompts in the New Hardware Wizard to install the printer. 4 6 9 10 11 12 7 8 5 Keyboard* Mouse* Monitor* Main Power Switch Power Cord Network Cable Main Power Switch Embedded Control Center Power Button 2000448_D Copyright © 2008 Rimage Corpo Rimage Professional™ 5100N und 5300N Einrichtungs- und Installationsanleitung Vorbereiten des Professional d. Entfernen Sie im Professional den Schaumstoff (nur 5300N). e. Entfernen Sie das Klebeband aus dem Eingabefach (nur 5100N). f. Entfernen Sie das Klebeband von der Disc-Zuführung. g. Entfernen Sie das Klebeband, mit dem die Druckerkabel an der Rückseite der Roboter-Station befestigt sind. Wichtig: Lesen Sie den Hinweisauf- kleber, bevor Sie ihn entfernen. - a. Entfernen Sie das Klebeband von der vorderen Gehäusetür. b. Entfernen Sie den Softwarevereinbarungsaufkleber von der vorderen Gehäusetür. Voraussetzungen: Dieses Dokument richtet sich an Personen, die mit Hardware-Einrichtung, Software- Installation und Windows-Betriebssystemen vertraut sind. Wenn Sie die in diesem Dokument beschriebenen Verfahren nicht verstehen, wenden Sie sich an Ihren Computertechniker. Rimage 5100N und 5300N gehören zur Professional-Roboter-Stationsserie von Rimage. In diesem Dokument wird die Bezeichnung „Professional“ sowohl für Rimage 5100N als auch für Rimage 5300N verwendet.  Hinweis: Ihr System sieht möglicherweise etwas anders aus als das hier dargestellte System. Informationen zum Verbinden des Systems mit einem Netzwerk fi nden Sie im Advanced Setup Guide (Handbuch für erweiterte Installation) (110721) , der im Lieferumfang der Roboter-Station enthalten ist. a. Drücken Sie auf die Verriegelungen der Seitenabdeckung. b. Klappen Sie die Seitenabdeckung nach unten. Vorbereiten des Everest-Druckers c. Entfernen Sie im Professional den Schutz-Schaumstoffstreifen. c. Öffnen Sie die Verriegelungen 1, 2 und 3 (siehe Pfeile in der Abbildung). d. Entfernen Sie die Kunststoff- Transportsicherungen (2) im Drucker. Einrichten des Druckers Setzen Sie den Drucker so auf das Professional, dass sich die Füße in den Aussparungen der Druckerfi xierplatte befi nden. ,Vorsicht: Seien Sie beim Anheben des Everest- Druckers vorsichtig, er ist sehr schwer. Wichtig! Verwahren Sie das gesamte Verpackungsmaterial. - 1 2 3 Fortsetzung siehe nächste Se Verriegelungen der Seitenabdecku Klebeband Klebeband Grafi k Schaumstoff Klebeband Klebeband Schaumstoff Klebeband Klebeband 5100N 5300N Kunststoff-Transportsicherungen Verriegelung 1 Verriegelun Verriegelung 2 Aussparungen Druckerplatte 20004 Copyright © 2008 Rimage Corporation Wichtig: Schalten Sie das Professional erst ein, wenn Sie dazu aufgefordert werden. - a. Schließen Sie das Netzkabel vom Professional an den Drucker an. c. Schließen Sie das USB- Kabel an den Drucker an. b. Schließen Sie das Druckerkabel an den Drucker an. Weitere Informationen Informationen zu Betrieb und Wartung des Professional fi nden Sie im Rimage 5100N and 5300N User Guide (Benutzerhandbuch für 5100N und 5300N), der im Lieferumfang Ihres Produkts enthalten ist. Weitere Support- und Produktinformationen fi nden Sie unter www.rimage.com/support.html. Konfi gurieren des Professional und Hinzufügen von Clients Testen und Prüfen Führen Sie einen 3-Disc-Testauftrag aus, um den ordnungsgemäßen Betrieb des Systems zu überprüfen. • Wenn das System an ein Netzwerk angeschlossen ist, erfolgt der Zugriff über Microsoft Remote Desktop Connection, das auf einem separaten PC ausgefüh wird. Weitere Informationen zum Zugriff auf Remote Desktop Connection erhalten Sie im Advanced Setup Guide (Handbuch für erweiterte Installation) (110721).  Hinweis: Wenn sich mehrere Professional an einem Netzwerk befi nden, ändern Sie den Computernamen. Weitere Informationen hierzu erhalten S im Advanced Setup Guide (Handbuch für erweiterte Installation) (110721) • Wenn Sie einen Monitor, eine Tastatur und eine Maus angeschlossen haben, melden Sie sich beim Professional mit folgendem Benutzernamen und Kennw an: Benutzername: Administrator Kennwort: password Aktivieren der Rimage-Software Die Rimage-Software muss innerhalb von 30 Tagen aktiviert werden. Solange die Rimage-Software nicht aktiviert ist, werden Sie bei jedem Öffnen des Programms zur Aktivierung aufgefordert. Wenn das Aktivierungsdialogfeld angezeigt wird, wählen Sie eine Option aus und befolgen Sie die Bildschirmanweisungen zum Aktivieren der Software. Wichtig: Rimage empfi ehlt Ihrem Netzwerkadministrator die Verwendung diese Anweisungen zum Abschließen der Konfi guration und Installieren der Software - Ausrichten des Druckers Informationen zum Ausrichten des Druckers fi nden Sie im Rimage 5100N and 5300N User Guide (Benutzerhandbuch für 5100N und 5300N), der im Lieferumfang Ihres Produkts enthalten ist. Anschließen der Druckerkabel Anschließen der Professional-Kabel a. Stellen Sie sicher, dass sich der Netzschalter auf der Rückseite des Professional in der AUS-Position befi ndet. b. Verbinden Sie das Netzkabel vom Professional mit einer Steckdose. c. Schließen Sie das Netzwerkkabel an das integrierte Control Center an. d. Schließen Sie einen Monitor, eine Maus und eine Tastatur an (optional). *Monitor, Tastatur und Maus sind nur erforderlich, wenn das System an kein Netzwerk angeschlossen ist. Einschalten des Professional a. Stellen Sie den Netzschalter auf der Rückseite des Professional in die EIN-Position. b. Drücken Sie auf den Ein-/Ausschaltknopf des integrierten Control Centers auf der Vorderseite des Professional, um das System einzuschalten.  Hinweis: Die Initialisierung kann bis zu 5 Minuten dauern. Wenn das Professional die Initialisierung abgeschlossen hat, wird auf dem Bedienfeld [RIMAGE 5000N READY] angezeigt. c. Warten Sie, bis das System die Initialisierung abgeschlossen hat. Drucker installieren Folgen Sie den Anweisungen des Assistenten zum Installieren neuer Hardware. 4 6 9 10 11 12 7 8 5 Netzschalter Ein-/Ausschaltknopf des integrierten Control Centers Tastatur* Maus* Monitor* Netzschalter Netzkabel Netzwerkkabel

5000N Specifications 2000447_C 1 Rimage 5000N Specifications Note: For printer specifications, refer to your Everest Printer User Guide.  Standard System 5100N - Rimage Professional 5100N, Everest printer, Rimage installed software. 5300N - Rimage Professional 5300N, Everest printer, Rimage installed software. 5100N 5300N Number of Recorders 1 2 Software requirements The required software is installed on the embedded PC. Input bin capacity 5100N 5300N Disc per Bin 50 50 Number of Bins 1 input 2 input Output capacity 5100N - One 75-disc output bin. 5300N - Five single-disc output trays and one 100- disc output bin. Physical size 5100N 5300N Height 19.25 in 48.90 cm 29.25 in 74.29 cm Width 15.00 in 38.10 cm 15.00 in 38.10 cm Depth** 23.38 in 59.39 cm 23.38 in 59.39 cm Weight 45 lbs 20.41 kgs 90 lbs 41.0 kgs W/ Everest printer 89 lbs 40.37 kgs 134 lbs 60.91 kgs ** Leave an additional 3.5 inches (9 cm) for cabling. Supported operating systems The supported operating system is installed on the embedded PC. Only the installed operating system is supported on this product. Specifications continued on page   2000447_C 5000N Specifications Power 100 – 240 VAC, 60/50 Hz, 4.7 – 3.7 Amp, 500 watt maximum Temperature and humidity Operating Temperature Humidity Storage Temperature 60 to 80 F 15.5 to 26.7 C 40-80% non- condensing 5 to 95 F -15 to 35 C Networking Ability To submit orders from a networked PC, refer to your Rimage Advanced Setup Guide. Media requirements Refer to your Everest User Guide for the correct media requirements. Rimage Media Kits™ are designed for optimum recording and print performance. Ribbon requirements Refer to your Everest User Guide for the correct printer ribbons. Rimage Media Kits include the required print ribbons. Label design requirements Refer to your Everest User Guide for label design requirements. Specifications continued from page 

Maintain the Professional 2000447_C 1 Maintain the Professional Use the information in this section to keep your Professional in optimal operating condition. Warning! n n Always power off the autoloader and unplug the power cord before you access the embedded PC. Overview Regular preventative maintenance of your Professional can help to ensure error-free recordings and clean printed labels. Maintenance involves cleaning the system and aligning the Everest printer on top of the autoloader. Note:   The Everest printer has its own maintenance requirements. Refer to your Rimage Everest User Guide for information. Cautionary Information Caution: n n To avoid damaging the 5000N during maintenance: Never use oils, silicone, or other lubricants on any part of the • Professional. Use only non-abrasive cleaners to wipe down the surfaces of your • Professional. Never use solvents to clean the embedded PC. • Avoid pouring solvents directly onto the Professional. Instead, apply the • solvent to the cloth first. Observe precautions for electrostatic-sensitive devices whenever you • access the embedded PC. 2 2000447_C Maintain the Professional Preventative Maintenance Schedule Use the following table as a guideline for how often to perform preventative maintenance tasks. Note:   Your system may require more frequent maintenance if used in a dusty area, such as a store or warehouse. Before you begin: 1. Power off the Professional. 2. Disconnect the power cord. Tool Task Frequency Lint-free cloth Non-abrasive, all- purpose cleaner Wipe down the lead screw and pay close attention to: the area just above the bearing at • the base of the lead screw the area just above the lift arm • Weekly Lint-free cloth Non-abrasive, all- purpose cleaner Wipe down all surfaces of the autoloader, including: sides and top • Input bins • output trays • output bin • base (remove the input bin first) • top surface on the lift arm • Weekly Can of compressed air Remove dust and debris from the fans at the back of the autoloader. Monthly Vacuum Remove dust and debris from the openings at the back of the autoloader. Monthly Can of compressed air Remove the side panels and remove all dust from the embedded PC. Monthly Torx T25 driver Align the Everest printer. Refer to the Align the Printer instructions on page 23. On installation and as needed.

Rimage Professional 5100N™ and 5300N™ User Guide This manual provides the information needed to operate the 5100N and 5300N and identify the parts. To set up and install your 5100N/5300N , refer to the Setup and Installation Guide. Corporate Headquarters: Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA 800-553-8312 (toll free US) Service: +1 952-946-0004 (International) Fax: +1 952-944-6956 European Headquarters: Rimage Europe GmbH Albert-Einstein-Str. 26 63128 Dietzenbach Germany Tel: +49-(0) 6074-8521-0 Fax: +49-(0) 6074-8521-21 CD and DVD Recording Software Disclaimer This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own the copyright or have obtained permission to copy from the copyright owner. Unless you own the copyright or have permission to copy from the copyright owner, you may be violating copyright law and be subject to payment of damages and other remedies. If you are uncertain about your rights, you should contact your legal advisor. If you are neither in possession of the copyright nor have authorization from the owner of the copyright, unauthorized copying of CDs and DVDs violates national and international legislation and can result in severe penalties. Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes. This document may contain links to web sites that were current at the time of publication, but may have moved or become inactive since. This document may contain links to sites on the Internet that are owned and operated by third parties. Rimage Corporation is not responsible for the content of any such third-party site. ©2007, Rimage Corporation Rimage™ is a trademark of the Rimage Corporation. Rimage 5300N™ and Rimage 5100N™ are trademarks of the Rimage Corporation. Dell™ is registered trademark of Dell Computer Corporation. FireWire™ is a registered trademark of Apple Computer, Inc. All other trademarks and registered trademarks are the property of their respective owners. 2000447_C 2000447_C Contents Introduction.............................................................................................. 1 Important Information............................................................................. 2 Support Information............................................................................................2 Learn More Online..............................................................................................3 Technical Support...............................................................................................3 Safety and Compliance Information....................................................................4 Safety Precautions......................................................................................................... 4 Compliance Information................................................................................................. 5 Rimage 5000N Specifications.............................................................................6 Identify the Parts of the 5000N............................................................... 8 Front View...........................................................................................................8 Back View...........................................................................................................9 5100N............................................................................................................................. 9 5300N............................................................................................................................. 9 Parts Information..............................................................................................10 Operator Panel............................................................................................................. 10 Output Trays (5300N only)........................................................................................... 10 Output Bin.....................................................................................................................11 Beeper...........................................................................................................................11 Operator Button............................................................................................................ 12 Pivot Tray Button (5300N only).................................................................................... 12 Operate the 5000N................................................................................. 13 Power On the 5000N........................................................................................13 Power Off the 5000N........................................................................................13 Load Discs........................................................................................................14 Load Input Bin 1........................................................................................................... 14 Load Input Bin 2 (5300N only)...................................................................................... 14 Maintain the 5000N................................................................................ 16 Overview...........................................................................................................16 Cautionary Information.....................................................................................16 Preventative Maintenance Schedule................................................................17 Diagnostic Tests................................................................................................18 Access Diagnostic Test Mode...................................................................................... 18 Diagnostic Test 3 – Calibrate Diagnostic Test.............................................................. 19 Diagnostic Test 6 – Sensors Diagnostic Test................................................................ 20 Exit Diagnostic Test Mode............................................................................................ 22 Align the Printer................................................................................................23 Access the Jog Lift Diagnostic Test.............................................................................. 23 Test the Printer Alignment............................................................................................ 23 Check the Disc Alignment ........................................................................................... 24 Operate Gemini Utilities........................................................................ 26 Start Gemini Utilities.........................................................................................26 Change the Autoloader Display Name..............................................................27 Enable the Beeper............................................................................................27 Introduction 2000447_C  Introduction This manual provides the information needed to operate the Rimage 5100N and the 5300N and identify the parts. To set up and install your 5100N and the 5300N, refer to the Rimage 5100N and 5300N Setup and Installation Guide included with your product. The Rimage 5100N and 5300N are part of the Rimage 5000N series of autoloaders. Throughout this document the term ‘5000N’ is used to refer to both the Rimage 5100N and the Rimage 5300N. Any differences between the autoloaders will be shown. The 5100N is a robotic-controlled autoloader with one recorder, a two-line display panel, and an Everest™ printer. The 5100N records and prints discs and then places the completed discs in the output bin. The 5300N is a robotic-controlled autoloader with two recorders, five output trays, a two-line display panel, and an Everest™ printer. The 5300N records and prints discs and then places the completed discs in the output bin, or in one of the five output trays. The 5000N has an embedded control center (PC) and is a network-ready device that receives orders from other networked computers. You can also operate the 5000N by attaching a monitor, keyboard, and mouse.

5300N™ Operator 2000516_A © 2007, Rimage Corporation 1 Replace the Bin Present Sensor or the Bin Full Sensor on a Rimage 5300N Use this procedure to replace the bin present sensor or the bin full sensor on a Rimage 5300N™. The procedures in this document should be performed only by personnel trained and authorized by Rimage. The instructions and content are written for mechanical and electrical service work assuming the technician has such training and authorization. The product warranty may become void if equipment or parts are tampered with, misused, neglected, or modified in any respect without the written consent of Rimage or by technicians who are not authorized or certified by Rimage. Before you begin 1. Stop or pause all jobs. 2. Power off the embedded control center. 3. Power off the 5300N. 4. Disconnect the power cord. # Required tools: • ¼” nut driver • Torx T8 screwdriver • Torx T10 screwdriver Access the sensors 1. Open the front door. 2. Remove the nuts (Qty. 2) securing the sensor bracket. 3. Remove the sensor bracket and sensors. 4. Disconnect the sensor cables (Qty. 2) from the sensors. n Caution! Some cables in this system are latched. Equipment damage may occur if cables are not disconnected appropriately. Sensor Bracket and Sensors Sensor Cables Replace the Bin Present Sensor or the Bin Full Sensor on a Rimage 5300N 2 © 2007, Rimage Corporation 2000516_A Replace the bin present sensor 1. Remove the Torx T10 screw (Qty. 1) securing the bin present sensor to the bracket. 2. Remove the bin present sensor. 3. Position the replacement bin present sensor on the bracket. 4. From the top of the sensor, insert the Torx T10 screw (Qty. 1) to secure the sensor to the bracket. Bin Present Sensor Replace the bin full sensor 1. Remove the Torx T8 screw (Qty. 1) securing the bin full sensor to the bracket. 2. Remove the bin full sensor. 3. Position the replacement bin full sensor on the bracket.  Notes: Bin Full Sensor • The sensor is on the opposite side of the bracket as the bin present sensor. • The sensor is positioned so that the screw is inserted into the hole with the raised edge. 4. Insert the Torx T8 screw (Qty. 1) to secure the sensor to the bracket. Raised Edge and Screw Reassemble the 5300N 1. Connect the cables (Qty. 2) to the sensors. 2. Position the sensor bracket over the studs on the frame. 3. Secure the sensor bracket with the nuts (Qty. 2). 4. Connect the power cord. 5. Run diagnostic test 6 – Sensors diagnostic test. More information on diagnostic tests is available in your 5300N user guide. 5300N Learn more Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes. Support information US, Asia/Pacific, Mexico/Latin America Europe Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA Attn: Rimage Services Rimage Europe GmbH Albert-Einstein-Str. 26 63128 Dietzenbach Germany Contact Rimage Services: www.rimage.com/support.html Email: http://www.rimage.com/support_form.cfm Tel: North America: 800-553-8312 Asia/Pacific, Mexico/ Latin America: 952-946-0004 Fax: 952-946-6956 Contact Rimage Services Europe: www.rimage.com/support.html Email: [email protected] Tel: +49-(0) 6074-8521-0 Fax: +49-(0) 6074-8521-21 When you contact Rimage Services, please provide: • Unit serial number and software version. • Functional and technical description of the problem. • Exact error message received. Safety Information Rimage 5300N™ This information and the indications on the product allow proper and safe operation. The indication marks below help protect you and other persons from injury, and equipment from damage. - Important! Any equipment that has certain components using AC line voltage, or in some cases low DC voltages, such as power switches, power supplies, fuses, fans, non-stepper motors, must be replaced with Rimage–approved components to maintain the safety approval issued by UL. n warning is used to indicate situations that n n: Indicates that failure to observe this guideline could result in loss or damage to the equipment, product, software, or , please read these precautions and familiarize yourself with their meaning before using the equipment. n r beam used by the DVD-R recorder is a Class 2 laser and can be harmful to the eyes. Do not attempt to open the n Ca tors, eplaced with Rimage-approved components to maintain the safety approval issued by UL. rmation or to order a new power cord, contact Rimage Customer Service. ƒ This product is designed for an office environment. Warning! According to ANSI (American National Standards Institute) standards, a could result in bodily injury to personnel operating or maintaining the equipment. Cautio data. Safety precautions To ensure safety Warning! ƒ Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiant exposure. ƒ The lase recorder. An authorized technician should perform all service procedures. ution: ƒ All equipment with AC line voltage, or low DC voltages, such as switches, power supplies, fuses, fans, non-stepper mo must be r ƒ Use only the supplied AC power cord. For more info 2000516_A © 2007, Rimage Corporation 3

Rimage Professional™ 5100N and 5300N User Guide This manual provides the information needed to operate the Rimage Professional, identify the parts, and configure the printing preferences. To set up and install your Rimage Professional, refer to the Rimage Professional Setup and Installation Guide included with your product. Corporate Headquarters: Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA 800-553-8312 (toll free US) Service: +1 952-946-0004 (Asia/ Pacific, Mexico/Latin America) Fax: +1 952-944-6956 European Headquarters: Rimage Europe GmbH Albert-Einstein-Str. 26 63128 Dietzenbach Germany Tel: +49-(0) 6074-8521-0 Fax: +49-(0) 6074-8521-100 Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes. This document may contain links to web sites that were current at the time of publication, but may have moved or become inactive since. This document may contain links to sites on the Internet that are owned and operated by third parties. Rimage Corporation is not responsible for the content of any such third-party site. ©2009, Rimage Corporation Rimage® is a registered trademark of the Rimage Corporation. Rimage Professional™ and Rimage Everest™ are trademarks of the Rimage Corporation. Dell™ is a trademark of Dell Computer Corporation. FireWire™ is a trademark of Apple Computer, Inc. Windows® is a registered trademark of Microsoft Corporation. All other trademarks and registered trademarks are the property of their respective owners. 2000447_E English Contents Introduction.............................................................................................. 1 About this User Guide.........................................................................................1 About Your Product.............................................................................................2 Important Information............................................................................. 3 Support Information............................................................................................3 Learn More Online..............................................................................................4 Technical Support...............................................................................................4 Optical Disc Software Disclaimer........................................................................5 Safety and Compliance Information....................................................................5 Safety Precautions......................................................................................................... 5 Compliance Information................................................................................................. 6 Rimage Professional Specifications...................................................................7 Identify the Parts of the Professional.................................................... 9 Front View...........................................................................................................9 Back View.........................................................................................................10 5100N........................................................................................................................... 10 5300N........................................................................................................................... 10 Parts Information.............................................................................................. 11 Operator Panel..............................................................................................................11 Output Trays (5300N only)............................................................................................11 Output Bin.................................................................................................................... 12 Beeper.......................................................................................................................... 12 Operator Button............................................................................................................ 13 Pivot Tray Button (5300N only).................................................................................... 13 Operate the Professional...................................................................... 14 Power On the Professional...............................................................................14 Power Off the Professional...............................................................................14 Load Discs........................................................................................................15 Load Input Bin 1........................................................................................................... 15 Load Input Bin 2 (5300N only)...................................................................................... 15 Maintain the Professional..................................................................... 17 Overview...........................................................................................................17 Cautionary Information.....................................................................................17 Preventative Maintenance Schedule................................................................18 Diagnostic Tests................................................................................................19 Access and Select Diagnostic Tests............................................................................. 19 Diagnostic Test 3 – Calibrate Lift Home....................................................................... 20 Diagnostic Test 6 – Sensors......................................................................................... 21 Exit Diagnostic Test Mode............................................................................................ 23 Align the Printer................................................................................................24 Access the Jog Lift Diagnostic Test.............................................................................. 24 Test the Printer Alignment............................................................................................ 24 Check the Disc Alignment ........................................................................................... 25 Operate Gemini Utilities........................................................................ 27 Start Gemini Utilities.........................................................................................27 Enable the Beeper............................................................................................28 English 1 2000447_E Rimage Professional 5100N and 5300N User Guide Introduction This manual provides the information needed to operate and identify the parts of the Rimage Professional 5100N and the Rimage Professional 5300N. To set up and install your 5100N and the 5300N, refer to the Rimage Professional 5100N and 5300N Setup and Installation Guide included with your product. For information about the Everest printer, refer to the Everest User Guide that shipped with the printer. About this User Guide • While we try to maintain all versions of our manuals and documentations, please note that the English version found on our web site always contains the most up-to-date information. • Unless otherwise indicated, all Windows navigation statements in this document are Windows XP paths. Windows Vista, Windows 2000, and Windows Server 2003 paths may differ slightly. • These symbols are used throughout the manual to help clarify information:   Note: A Note provides supplemental information or information that may apply only in special cases. For example, memory limitations, equipment configurations, or details that apply to specific versions of a program would be included in a Note. Tip: A Tip provides techniques and procedures to help with your specific needs. A Tip suggests alternative methods that may not be obvious and helps you understand the benefits and capabilities of the product. - - Important! An Important note provides information essential to the completion of a task. You can disregard information in a Note or Tip and still complete a task, but do not disregard an Important note. n n Caution: A Caution indicates that failure to observe this guideline could result in loss or damage to the equipment, product, software, or data. , , Warning! A Warning indicates that failure to follow this guideline could result in bodily injury to personnel operating or maintaining the equip- ment. English