Santec E-Series Manuals

Installation Instruction Single Control Lavatory Set E-SERIES COLLECTIONS Please read the instructions completely before beginning the installation. Ebis Collection Model Number: 3780HY Metra Collection Model Number: 2480MD Flush both supply lines before installation, then shut off both supply lines. Minimum hole size for the spout and handle trim is 1-1/4” and maximum of 1-1/2” Remove fastening nut, metal washer and rubber washer from spout assembly. Insert the lift rod into the fixture. 1 Rev 06/2016 The measurements shown are for reference only. Products and specifications shown are subject to change without notice. www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681 SPOUT INSTALLATION 1/7 Bravo Collection Model Number: 6680BO Element Collection Model Number: 3880JS Model Number: 3881JS

E-SERIES SERIES SQUARE COLLECTIONS PAPER HOLDER MODEL: 2465SQ10 2465SQ75 KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE Important : Please register your product online at www.santecfaucet.com within 30 days of purchase. Santec reserves the right to request additional documents before servicing warranty requests. 0 1 0 2 Installation Instructions Place the post against the assigned wall location. Make sure that the holder is leveled. Mark the holder post position. 1. Using the Allen key provided, remove the holder post from the mounting post. Press the mounting post against marked post position on the wall and mark the screw hole positions. NOTE: MAKE SURE THE ALLEN SCREW HOLE ON THE MOUNTING POST IS FACING DOWN WHEN SECURING TO WALL. INSTALLING ON WOODEN SURFACE For wooden surface, the mounting post can be secured by screwing the screws directly into the wall. INSTALLING ONTO DRYWALL SURFACE Using a drill, pre-drill holes for the anchors. Insert the anchors into the wall. The mounting post can be secured by screwing the screws into the anchors. INSTALLING ONTO A SOLID SURFACE Measure the dimensions carefully. Using a drill, pre-drill the holes. Secure the mounting post by screwing the screws into the wall. 2. holder post holder post mark mounting post WALL 7 8" 61 2" 415 16" 17 16" 23 4"

E-SERIES SERIES SQUARE COLLECTIONS TOWEL RING MODEL: 2464SQ10 2464SQ75 KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE Important : Please register your product online at www.santecfaucet.com within 30 days of purchase. Santec reserves the right to request additional documents before servicing warranty requests. 0 1 0 2 Installation Instructions Place the trim parts against the assigned wall location. Make sure that the ring is leveled. Mark the ring post flange position and remove the trim. 1. Using the Allen key provided, remove the mounting post from the ring post. Press the mounting post against ring post position on the wall and mark the screw hole positions. NOTE: MAKE SURE THE ALLEN SCREW HOLE ON THE MOUNTING POST IS FACING DOWN WHEN SECURING TO WALL. 2. WALL INSTALLING ON WOODEN SURFACE For wooden surface, the mounting post can be secured by screwing the screws directly into the wall. INSTALLING ONTO DRYWALL SURFACE Using a drill, pre-drill holes for the anchors. Insert the anchors into the wall. The mounting post can be secured by screwing the screws into the anchors. INSTALLING ONTO A SOLID SURFACE Measure the dimensions carefully. Using a drill, pre-drill the holes. Secure the mounting post by screwing the screws into the wall. ring post mark mounting post 913 16" 23 4" 17 16" 7 8" 87 16"

E-SERIES SERIES SQUARE COLLECTIONS ROBE HOOK MODEL: 2466SQ10 2466SQ75 KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE Important : Please register your product online at www.santecfaucet.com within 30 days of purchase. Santec reserves the right to request additional documents before servicing warranty requests. 0 1 0 2 Installation Instructions Place the post against the assigned wall location. Make sure that the holder is leveled. Mark the holder post position. 1. Using the Allen key provided, remove the holder post from the mounting post. Press the mounting post against marked post position on the wall and mark the screw hole positions. NOTE: MAKE SURE THE ALLEN SCREW HOLE ON THE MOUNTING POST IS FACING DOWN WHEN SECURING TO WALL. INSTALLING ON WOODEN SURFACE For wooden surface, the mounting post can be secured by screwing the screws directly into the wall. INSTALLING ONTO DRYWALL SURFACE Using a drill, pre-drill holes for the anchors. Insert the anchors into the wall. The mounting post can be secured by screwing the screws into the anchors. INSTALLING ONTO A SOLID SURFACE Measure the dimensions carefully. Using a drill, pre-drill the holes. Secure the mounting post by screwing the screws into the wall. 2. holder post holder post mark mounting post WALL 7 8" 23 8" 27 16" 17 16"

E-SERIES SERIES SQUARE COLLECTIONS 24” TOWEL BAR MODEL: 2461SQ10 2461SQ75 KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE Important : Please register your product online at www.santecfaucet.com within 30 days of purchase. Santec reserves the right to request additional documents before servicing warranty requests. 0 1 0 2 Installation Instructions Place the trim parts against the assigned wall location. Make sure the bar is leveled and the bar post positions are correct. Mark with pencil the bar post flange positions and remove the trims. 1. Using the Allen key provided, remove the mounting posts from the bar posts. Press the mounting posts against the bar post flange positions on the wall and mark the screw hole positions. NOTE: MAKE SURE THE ALLEN SCREW HOLE ON THE MOUNTING POST IS FACING DOWN WHEN SECURING TO WALL. 2. WALL bar post INSTALLING ON WOODEN SURFACE For wooden surface, the mounting post can be secured by screwing the screws directly into the wall. INSTALLING ONTO DRYWALL SURFACE Using a drill, pre-drill holes for the anchors. Insert the anchors into the wall. The mounting post can be secured by screwing the screws into the anchors. INSTALLING ONTO A SOLID SURFACE Measure the dimensions carefully. Using a drill, pre-drill the holes. Secure the mounting post by screwing the screws into the wall. holder post mark mounting post 24" 11 2" 7 8" 23 8"

E-SERIES: EBIS COLLECTION WIDESPREAD LAVATORY WITH “HY” HANDLES MODEL: 3720HY10 3720HY75 KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE 0 1

E-SERIES: EBIS COLLECTION PRESSURE BALNCED WITH DIVERTER/TRIM ONLY WITH “HY” HANDLES MODEL: 3735HY10 3735HY75 KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE 0 1