Sealey CRM251 Manuals

3 pdf manual(s) Sealey CRM251 for free download (Document Types: Instructions)

Sealey CRM251 Instructions Thumbnail

Sealey CRM251 Instructions [PDF] (2 pages)

  • Identifier: id-2086204
  • Brand: Sealey
  • Device: Sealey CRM251 Cables and connectors
  • Type: Instructions, PDF
  • Key Aspects: Storage and Care Recommendations, Cleaning and Sanitization Methods, Operational Mode Explanations
  • UPD Date: 17.06.2026
  • Source File: 2201652.pdf
  • Pages: 2
  • Description: Complete operating guide for the Sealey CRM251.
Pages Preview:
  • Sealey CRM251 Instructions preview - page 2
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instructions for: Cable reel system Retractable 25mtr 1 x 230V Socket Model No: CRM251 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. 1. SAFETY INSTRUCTIONS IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE. 1.1. ELECTRICAL SAFETY  WARNING! It is the user’s responsibility to read, understand and comply with the following: You must check all electrical equipment and appliances to ensure they are safe before using. You must inspect power supply leads, plugs and all electrical connections for wear and damage. You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices. An RCCB (Residual Current Circuit Breaker) should be incorporated in the main distribution board. We also recommend that an RCD (Residual Current Device) is used with all electrical products. It is particularly important to use an RCD with portable products that are plugged into an electrical supply not protected by an RCCB. If in doubt consult a qualified electrician. You may obtain a Residual Current Device by contacting your Sealey dealer. You must also read and understand the following instructions concerning electrical safety: 1.1.1. The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a year. 1.1.2. The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician. 1.1.3. Ensure the insulation on all cables and the product itself is safe before connecting to the mains power supply. See 1.1.1. & 1.1.2. above and use a Portable Appliance Tester (PAT). 1.1.4. Ensure that cables are always protected against short circuit and overload. 1.1.5. Regularly inspect power supply, leads, plugs for wear and damage and all electrical connections to ensure that none are loose. 1.1.6. Important: Ensure that the product voltage matches the power supply to be used. 1.1.7. DO NOT pull power plugs from sockets by the power cable. 1.1.8. DO NOT use worn or damaged leads, plugs or connections. Immediately replace or have repaired by a qualified electrician. A U.K. 3 pin plug with ASTA/BS approval is fitted. In case of damage, remove and fit a new plug according to the following instructions (discard old plug safely). (UK only - see diagram at right). Ensure the unit is correctly earthed via a three-pin plug. a) Connect the green/yellow earth wire to the earth terminal ‘E’. b) Connect the brown live wire to live terminal ‘L’. c) Connect the blue neutral wire to the neutral terminal ‘N’. d) After wiring, check that there are no bare wires, that all wires have been correctly connected, that cable outer insulation extends beyond the cable restraint and that the restraint is tight. 1.2. GENERAL SAFETY  Familiarise yourself with the application and limitations of the reel, as well as the specific hazards.  WARNING! Isolate the reel from the electrical supply before connecting or disconnecting equipment, servicing or performing any maintenance.  Maintain the reel in good condition (use an authorised service agent).  Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty.  Locate and fix the reel in a suitable work area. Do not position in direct sunlight, or in areas of extreme temperature.  Keep extended cable away from heat, oil and sharp edges. Check cable for wear before each use and ensure all connections are secure.  Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.  Keep children and unauthorised persons away from the work area.  DO NOT allow the extended cable to trail through liquids.  DO NOT trail the extended cable where it is likely to be a hazard to others.  DO NOT allow vehicles or wheeled equipment to pass over the extended cable.  DO NOT use the reel for any purpose other than that for which it is designed.  DO NOT operate the reel when you are tired, under the influence of alcohol, drugs or intoxicating medication.  When not in use, switch off the electrical supply and retract cable into case. Store in a safe, dry location  WARNING! DO NOT dismantle the reel casing, or attempt to remove the screws on the sides. To do so may result in damage to the reel and/or personal injury and will invalidate the warranty. Internal maintenance, which will require the opening of the casing, must only be undertaken by an authorised service agent.  WARNING! Observe the wound and unwound capacities in the specifications below. 2. SPECIFICATIONS Durable composite housing operated by simple pull and release action. Features integral manual thermal trip switch to prevent overload and LED power indicator. Supplied with single socket outlet and BS approved plug. Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CRM251 Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V Cable Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 1.5mm² Cable Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mtr Thermal Trip: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes Capacity Wound: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000W Capacity Unwound: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3500W Recommended Fuse Rating: 13A Original Language Version CRM251 Issue: 1 - 12/07/12 © Jack Sealey Limited 2012
Sealey CRM251 Instructions Thumbnail

Sealey CRM251 Instructions [PDF] (2 pages)

  • Identifier: id-2300474
  • Brand: Sealey
  • Device: Sealey CRM251 Cables and connectors
  • Type: Instructions, PDF
  • Key Aspects: Hardware Setup Instructions, Glossary of Technical Terms, Advanced Configuration Methods
  • UPD Date: 25.07.2026
  • Source File: 1987150.pdf
  • Pages: 2
  • Description: Product usage guide for the Sealey CRM251.
Pages Preview:
  • Sealey CRM251 Instructions preview - page 2
Document Preview & Text Transcription (Main Page)
Click to expand and read text
INSTRUCTIONS FOR CABLE REEL SYSTEM RETRACTABLE 25mtr 1 X 230V SOCKET. MODEL NO: CRM251 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY 1.1. Electrical Safety � WARNING! It is the user’s responsibility to check the following: Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical products. You may obtain an RCD by contacting your local Sealey dealer. If used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance Test) tested. Electrical safety information, it is important that the following information is read and understood. 9 Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 9 regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure. 9 Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse - see fuse rating in these instructions. 8 DO NOT pull or carry the appliance by the power cable. 8 DO NOT pull the plug from the socket by the cable. 8 DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or replaced immediately by a qualified electrician. 9 This product is fitted with a BS1363/A 13 Amp 3 pin plug. If the cable or plug is damaged during use, switch off the electricity supply and remove from use. Ensure that repairs are carried out by a qualified electrician. Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician. a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’. b) Connect the BROWN live wire to the live terminal ‘L’. c) Connect the BLUE neutral wire to the neutral terminal ‘N’. Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. Sealey recommend that repairs are carried out by a qualified electrician. 1.2. General Safety Familiarise yourself with the application and limitations of the reel, as well as the specific hazards. � WARNING! Isolate the reel from the electrical supply before connecting or disconnecting equipment, servicing or performing any maintenance. 9 Maintain the reel in good condition (use an authorised service agent). 9 Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty. 9 Locate and fix the reel in a suitable work area. DO NOT position in direct sunlight, or in areas of extreme temperature. 9 Keep extended cable away from heat, oil and sharp edges. Check cable for wear before each use and ensure all connections are secure. 9 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes. 9 Keep children and unauthorised persons away from the work area. 8 DO NOT allow the extended cable to trail through liquids. 8 DO NOT trail the extended cable where it is likely to be a hazard to others. 8 DO NOT allow vehicles or wheeled equipment to pass over the extended cable. 8 DO NOT use the reel for any purpose other than that for which it is designed. 8 DO NOT operate the reel when you are tired, under the influence of alcohol, drugs or intoxicating medication. 9 When not in use, switch off the electrical supply and retract cable into case. Store in a safe, dry location � WARNING! DO NOT dismantle the reel casing, or attempt to remove the screws on the sides. To do so may result in damage to the reel and/or personal injury and will invalidate the warranty. Internal maintenance, which will require the opening of the casing, must only be undertaken by an authorised service agent. � WARNING! Observe the wound and unwound capacities in the specifications below. Recommended fuse rating 13 Amp CRM251 | Issue 2 20/07/17 Original Language Version © Jack Sealey Limited Refer to instructions Electrical shock hazard
Sealey CRM251 Instructions Thumbnail

Sealey CRM251 Instructions [PDF] (2 pages)

  • Identifier: id-2300475
  • Brand: Sealey
  • Device: Sealey CRM251 Cables and connectors
  • Type: Instructions, PDF
  • Key Aspects: Common Issue Diagnostic Flows, Hardware Verification Checklists, Advanced Configuration Methods
  • UPD Date: 21.07.2026
  • Source File: 1987149.pdf
  • Pages: 2
  • Description: Device technical manual for the Sealey CRM251.
Pages Preview:
  • Sealey CRM251 Instructions preview - page 2
Document Preview & Text Transcription (Main Page)
Click to expand and read text
INSTRUCTIONS FOR CABLE REEL SYSTEM RETRACTABLE 25mtr 1 X 230V SOCKET. MODEL NO: CRM251 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY 1.1. Electrical Safety � WARNING! It is the user’s responsibility to check the following: Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical products. You may obtain an RCD by contacting your local Sealey dealer. If used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance Test) tested. Electrical safety information, it is important that the following information is read and understood. 9 Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 9 regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure. 9 Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse - see fuse rating in these instructions. 8 DO NOT pull or carry the appliance by the power cable. 8 DO NOT pull the plug from the socket by the cable. 8 DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or replaced immediately by a qualified electrician. 9 This product is fitted with a BS1363/A 13 Amp 3 pin plug. If the cable or plug is damaged during use, switch off the electricity supply and remove from use. Ensure that repairs are carried out by a qualified electrician. Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician. a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’. b) Connect the BROWN live wire to the live terminal ‘L’. c) Connect the BLUE neutral wire to the neutral terminal ‘N’. Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. Sealey recommend that repairs are carried out by a qualified electrician. 1.2. General Safety Familiarise yourself with the application and limitations of the reel, as well as the specific hazards. � WARNING! Isolate the reel from the electrical supply before connecting or disconnecting equipment, servicing or performing any maintenance. 9 Maintain the reel in good condition (use an authorised service agent). 9 Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty. 9 Locate and fix the reel in a suitable work area. DO NOT position in direct sunlight, or in areas of extreme temperature. 9 Keep extended cable away from heat, oil and sharp edges. Check cable for wear before each use and ensure all connections are secure. 9 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes. 9 Keep children and unauthorised persons away from the work area. 8 DO NOT allow the extended cable to trail through liquids. 8 DO NOT trail the extended cable where it is likely to be a hazard to others. 8 DO NOT allow vehicles or wheeled equipment to pass over the extended cable. 8 DO NOT use the reel for any purpose other than that for which it is designed. 8 DO NOT operate the reel when you are tired, under the influence of alcohol, drugs or intoxicating medication. 9 When not in use, switch off the electrical supply and retract cable into case. Store in a safe, dry location � WARNING! DO NOT dismantle the reel casing, or attempt to remove the screws on the sides. To do so may result in damage to the reel and/or personal injury and will invalidate the warranty. Internal maintenance, which will require the opening of the casing, must only be undertaken by an authorised service agent. � WARNING! Observe the wound and unwound capacities in the specifications below. Recommended fuse rating 13 Amp CRM251 | Issue 2 20/07/17 Original Language Version © Jack Sealey Limited Refer to instructions Electrical shock hazard

Similar Manuals in the Cables and connectors Category

Device Model Type of Document Pages Size Views Downloads Updated All Manuals for Device
Erco Minirail 48V

PDF Manual (@2ZKCJT), Erco Minirail 48V Power Supply (01-05-2026)

3 789 135 01-05-2026 view all manuals
Conrad 97 25 14

Conrad 97 25 14 Guide (Operating instructions manual), @45VN1O

8 70 13 15-08-2026 view all manuals
EVBox Elvi

Elvi (Battery Charger ePDF Manual, #BAK6YG)

60 72 13 20-03-2026 view all manuals
ATEN VanCryst VE872

VanCryst VE872 Quick start manual - 82PN84

2 1033 217 05-04-2026 view all manuals
Kramer RTBUS-24

Kramer Enclosure Quick start manual (File: PDF, 14-04-2026)

2 1151 208 14-04-2026 view all manuals
Philips SWV2223W

#T2GJB7: SWV2223W Cables and connectors Specifications

2 0.46 Mb 78 15 24-07-2026 view all manuals