-
Thank you very much for purchasing our product.
1
-
Table of contents
2
-
2. Strage bag
9
-
Power cord list for Europe
11
-
Precautions For Use
13
-
Handling precautions (continued)
14
-
Names of parts(SR-3500)
16
-
Names of parts ( When stacker unit is installed)
17
-
Single sided, [double-sided]
19
-
4. Connect the power cord to the main device.
22
-
■Preparation(when stacker unit installed)
23
-
4. Connect the power cord to the power outlet.
24
-
■Turning power on
25
-
■Setting paper weight
28
-
Marks readable by this device are as follows.
29
-
Connecting to a computer
30
-
1. Operating mode
31
-
Connecting to a computer ■USB
32
-
Connecting to a computer ■RS-232C
33
-
Setting stop bit
36
-
DOWN switches to set the value.
37
-
Data reading settings
38
-
■Setting reading method
39
-
■Setting density balance
42
-
■Setting reading side
43
-
■Setting Paper hold(SR-3500)
45
-
Error detection settings
46
-
4. Use the
47
-
■Buzzer sound adjustment
49
-
Stacker go out direction
50
-
1. Character size setting
52
-
Printer settings ■SR-3500,SR-6500 mode
53
-
switch to save the setting value into memory.
54
-
Printer settings ■SR-600,SR-9000 mode
55
-
3. Character interval setting
57
-
Barcode settings (when barcode unit is installed)
59
-
Low power consumption settings
60
-
1. Press the
61
-
Displaying various information
62
-
■Displaying front side reading sensor settings
63
-
■Displaying back side reading sensor settings
64
-
■Displaying optional unit settings
65
-
■Displaying total count
66
-
■Displaying serial number
67
-
This section explains operating test procedures.
68
-
■Feed test 2
69
-
■Printer jet test
71
-
■Stacker unit (printer) preparation
73
-
■Printing position adjustment
76
-
8. Close the front door of the stacker unit.
78
-
■Clearing paper jams
79
-
■Stacker unit precautions for use
80
-
Back side reading unit
81
-
1. Printing after reading marks
83
-
■Printer unit preparation
84
-
6. Execute printer test ( See P.70).
86
-
■Printer unit precautions for use
87
-
Barcode unit / V • barcode unit / H
88
-
Barcode unit / H (horizontal feeding)
89
-
■Barcode readable area
90
-
2. Barcode unit / H (horizontal feeding)
91
-
■Barcode reading position adjustment
92
-
5. check reading using a diagnostic utility.
93
-
■Barcode unit precautions for use
94
-
Stacker unit (when stacker unit is installed)
97
-
5. Close the jam release lever.
99
-
Driving roller / 1
101
-
(Unit : mm)
102
-
SR-3500 mode , SR-600 mode
104
-
(only when the
105
-
Feed Test 1
106
-
Error displays and countermeasures
107
-
Line error occurred between
108
-
Line error occurred between the
109
-
A non-specified command code
110
-
Jam at printer printing
111
-
Interlock on the side of the
112
-
[Main body unit]
113
-
Column and Row
114
-
Timing control type
115
-
Direct under type
116
-
Mark to mark type
119
-
■Sheet creation reference
120
-
(13) Paper dimensions
122
-
[Direct under type card (0.25” IBM card size)]
123
-
[Timing control type sheet]
124
-
[Mark to mark type sheet]
125
-
[Mark to mark type card (0.25” IBM card size)]
126
