Sharp QT-CD161H Manuals

QT-CD161H OPERATION MANUAL MODEL YT PORTABLE CD STEREO SYSTEM NOTE FOR USERS IN THE U.K. SERVICE INFORMATION In the unlikely event of your equipment requiring repair, please contact the dealer or supplier from whom it was purchased. Where this is not possible, please contact the telephone number listed below. You will then be given details of how to obtain service. - 0345-125387 - Please note; all calls will be charged at local rate. Certain replacement parts and accessories may be ob- tained from our main parts distributor. WILLOW VALE ELECTRONICS LTD. In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of the date of purchase to the repairing company. Please keep your invoice or receipt, which is supplied at the time of purchase. The mains lead of this product is fitted with a non-rewire- able (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be in- serted elsewhere into a 13A socket outlet as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: G The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. G The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is con- nected to the earth terminal in your three pin plug. Before replacing the plug cover, make sure that: MANCHESTER 0161-682-1415 READING 01189-876444 Thank you for purchasing this SHARP product. For the best performance, read this manual care- fully. It will guide you in operating your SHARP product. G If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. G The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN. QT-CD161H(SUK) TINSE0026SJZZ