Sharp QT-CD161H Operation Manual

NOTE FOR USERS IN THE U.K. SERVICE INFORMATION In the unlikely event of your equipment requiring repair, please contact the dealer or supplier from whom it was purchased. Where this is not possible, please contact the telephone number listed below. You will then be given details of how to obtain service. - 0345-125387 - Please note; all calls will be charged at local rate. Certain replacement parts and accessories may be ob- tained from our main parts distributor. WILLOW VALE ELECTRONICS LTD. In the unlikely event of this equipment requiring repair during the guarantee period, you w ...

number indicate the colour of the product only. Operation and specifications are unaffected. G When the ON/STAND-BY switch is set at STAND-BY position, mains voltage is still pres- ent inside the unit. Warning: This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. G Recording and playback of any material may require consent, which SHARP is unable to give. Please refer particularly to the provisi ...

insecticides on the unit. G Do not expose the unit to moisture, to tempera- tures higher than 60˚C (140˚F) or to extreme low temperatures. G Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home compu- ters, facsimiles, etc.) which generates electrical noise. G Hold the AC power plug by the head when re- moving it from the AC socket, as pulling the lead can damage internal wires. G When cleaning the heads, pinch roller, etc, remove the AC power plug from the wall socket as the unit contains ...

1 2 3 4 5 6 7 8 9 10 11 16 17 18 13 14 15 25 26 27 28 29 30 31 32 33 12 NAMES OF CONTROLS AND INDICATORS 11. (TAPE) Record Button 12. (TAPE) Play Button 13. (TAPE) Rewind Button 14. (TAPE) Fast Forward Button 15. (TAPE) Stop/Eject Button 16. (TAPE) Pause Button 17. Cassette Compartment 18. CD Compartment 19. CD Eject Button 10. (CD) Pause Button 3 (TUNER) Band Selector Button 11. Preset Memory Button 12. (CD) Stop Button 3 (TUNER) Tuning Down Button 13. (CD) Play/Repeat Button 3 (TUNER) Tuning Up Button 14. (CD) Track Up/Cue Button 3 (TUNER) Preset Up Button 15. (CD) Track Down/Review Button 3 (TUNER) Preset Down Button 16. St ...

G To AC INPUT G AC 230 - 240 V, 50 Hz Connect the AC power lead to the AC power input socket, then connect the AC power lead plug to an AC socket. Notes: G If the unit will not be used for a long period of time, remove the AC power lead from the AC socket. G Connection of the AC power lead to the unit disconnects the batteries. G Never use a power lead other than the one supplied. Use of a power lead other than the one supplied may cause an electric shock or fire. I Battery power 1 Disconnect the AC power lead, and remove the battery compartment cover. 2 Insert 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar) for tu ...

I CD playback 1 Set the function switch to CD. 2 Press the CD EJECT button to open the CD compartment. 3 Place a compact disc on the spindle, label side up. G 8 cm (3") discs may be played without an adap- tor. 4 Close the CD compartment by firmly pushing the corner marked "PUSH CLOSE". Total num- ber of tracks Total playing time Playing time of the first track 5 Press the PLAY/REPEAT (0 R) button to start playback from track 1. To interrupt playback: Press the PAUSE BAND (6) button. To resume playback: Press the PLAY/REPEAT (0 R) button. To stop playback: Press the STOP (I) button. 6 Rotate the VOLUME control towards rig ...

An entire disc can be continuously repeated. To repeat all of the tracks on the disc: Press the PLAY/REPEAT (0 R) button twice during playback. To cancel repeat play: Press the PLAY/REPEAT (0 R) button again. I Cue and review 1 Load a disc and begin playback. 2 Hold down the CUE 2 (2 / 4) button for audible fast forward, and hold down the 3 REVIEW (3 / 5) button for audible fast reverse. 3 Normal playback will resume when the 3 RE- VIEW (3 / 5) or CUE 2 (2 / 4) button is released. Notes: G If the end of the disc is reached whilst cueing, the CD will pause. Press the 3 REVIEW (3 / 5) button for fast reverse or press ...

1 Set the function switch to TUNER. 2 Select the desired frequency band. (FM ST, FM or AM) G To receive an FM stereo transmission, press the BAND button so that the "ST" indicator on the display lights up. G The "j" indicator lights up when an FM broad- cast is in stereo. 3 Press the TUNING (X or W) button to tune into the desired station. G Holding it down for more than 0.5 seconds will cause the frequency to change rapidly until the button is released. G If the FM reception is poor, press the BAND button so that the "ST" indicator goes out. Although the reception changes to monaural, the sound becomes clearer. ...

make a preliminary test to ensure that the desired material is being properly recorded. G The ALC (Automatic Record Level Control) cir- cuit automatically controls the level of the input signal used for recording. G The VOLUME and X-BASS controls may be adjusted with no effect to the recorded signal. (Variable Sound Monitor) G Metal and CrO2 tapes cannot be used for recor- ding. I Recording from the built-in CD player 1 Set the function switch to CD. G Load the disc to be recorded. 2 Load the cassette into the cassette compart- ment. 3 Press the RECORD button. 4 Press the PLAY/REPEAT ( ...

prior notice. G General Power source: AC 230 - 240 V, 50 Hz DC 12 V ["D" size (UM/SUM-1, R20 or HP-2) battery × 8] DC 3 V ["AA" size (UM/SUM-3, R6 or HP-7) battery × 2 for tuner memory] Power consumption: 20 W Output power: MPO (Max.); 8.4 W (4.2 W + 4.2 W) (AC operation) RMS; 4.6 W (2.3 W + 2.3 W) (DC operation, 10 % T.H.D.) Speakers: 10 cm (4") full-range speaker x 2 Output terminals: Headphones; 16-50 ohms (recommended; 32 ohms) Dimensions: Width; 480 mm (18-15/16") Height; 153 mm (6-1/16") Depth; 254 mm (10") Weight: 3.2 kg (7. ...