SMA 8000TL Manuals

Operating Manual SUNNY TRIPOWER 5000TL/6000TL/7000TL/8000TL/9000TL/ 10000TL/12000TL STP5-12TL-20-BE-en-15 | Version 1.5 ENGLISH

STP8-17TL-BEN105020 | IMEN-STP10-17TL | Version 2.0 EN PV Inverter SUNNY TRIPOWER User Manual 8000TL / 10000TL / 12000TL / 15000TL / 17000TL Symbols on the Inverter Operation Display. An error has occurred. Please inform your installer immediately. Bluetooth®. Bluetooth communication active.* Symbols on the Type Label Beware of dangerous electrical voltage. The inverter operates at high voltages. All electrical work on the inverter must be carried out by qualified personnel only. Beware of hot surface. The inverter can become hot during operation. Avoid contact during operation. Observe enclosed documentation. The inverter must not be disposed of together with the household waste. Further disposal information can be found in the enclosed installation guide. CE mark. The inverter complies with the requirements of the applicable EC guidelines. RAL quality mark for solar products. The inverter complies with the requirements of the German Institute for Quality Assurance and Labeling. Certified safety. The inverter complies with the requirements of the Equipment and Product Safety Act in Europe. Australian mark of conformity Korean mark of conformity Direct Current (DC) Alternating Current (AC) The inverter is protected against penetration by dust particles and water jets from any angle. The inverter is transformerless. * The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of these marks by SMA Solar Technology AG is under license. Visual inspection Check the inverter and the cables for visible external damage. Contact your installer if you find any defects. Do not perform any repair work yourself. Maintenance and Cleaning Ask your installer to check for correct inverter operation at regular intervals. AC Abbreviation for "alternating current". Bluetooth Bluetooth is a radio technology that allows the inverter and other communication devices to communicate with each other. Bluetooth communication does not require visual contact between the devices. DC Abbreviation for "direct current". Electronic Solar Switch (ESS) The Electronic Solar Switch is part of the inverter's DC disconnection unit. The Electronic Solar Switch must be securely inserted into the bottom of the inverter and must only be removed by qualified personnel. Energy Energy is measured in Wh (watt hours), kWh (kilowatt hours) or MWh (megawatt hours). The energy is the power calculated over time. If, for example, your inverter operates at a constant output of 3,000 W for half an hour and then at a constant output of 2,000 W for another half hour, it has fed 2,500 Wh of energy into the grid within that hour. Power Power is measured in W (watts), kW (kilowatts) or MW (megawatts). Power is a momentary value. It displays the power your Sunny Boy is currently feeding into the grid. PV Abbreviation for photovoltaics. Visual inspection, maintenance and cleaning Glossary If you have technical problems, first contact your installer. The following information is required in order to provide you with the necessary assistance: • Inverter device type • Inverter serial number • Type and number of PV modules connected • Event number or display message of the inverter • Optional equipment (e.g. communication devices) SMA Solar Technology AG Sonnenallee 1 34266 Niestetal, Germany www.SMA.de SMA Serviceline Inverters: +49 561 9522 1499 Communication: +49 561 9522 2499 Fax: +49 561 9522 4699 E-Mail: [email protected] Contact Installer contact Explanation of Symbols

STP8-17TL-BA-BEN112030 | IMEN-STP10-17TL | Version 3.0 EN PV Inverter SUNNY TRIPOWER User Manual 8000TL/10000TL/12000TL/15000TL/17000TL Symbols on the Inverter Operation display. An error has occurred. Please inform your installer immediately. Bluetooth®. Bluetooth Communication active.* Symbols on the Type Label Beware of dangerous electrical voltage. The inverter operates at high voltages. Any work on the inverter must be carried out by qualified personnel only. Beware of hot surface. The inverter can become hot during operation. Avoid contact during operation. Observe enclosed documentation. The inverter must not be disposed of together with the household waste. Further disposal information can be found in the enclosed installation guide. CE mark. The inverter complies with the requirements of the applicable EC guidelines. RAL quality mark for solar products. The inverter complies with the requirements of the German Institute for Quality Assurance and Labeling. Device class label. The inverter is equipped with a wireless component that complies with the harmonized standards. Certified safety. The inverter complies with the requirements of the Europe Equipment and Product Safety Act. In compliance with Australian mark In compliance with Korean mark Direct Current (DC) Alternating current (AC) The inverter is protected against penetration by dust particles and water jets from any angle. The inverter is transformerless. * The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of these marks by SMA Solar Technology AG is under license. Visual inspection Check the inverter and cables for any visual signs of external damage. Contact your installer if you find any damage. Do not perform any repair work yourself. Maintenance and Cleaning Ask your installer to check for correct inverter operation at regular intervals. AC Abbreviation for "alternating current". Bluetooth Bluetooth is a radio technology that allows the inverter and other communication devices to communicate with each other. Bluetooth Communication does not require visual contact between the devices. DC Abbreviation for "direct current". Electronic Solar Switch (ESS) The Electronic Solar Switch is part of the inverter DC disconnection unit. Electronic Solar Switch must be securely inserted into the bottom of the inverter and must only be removed by qualified personnel. Energy Energy is measured in Wh (watt hours), kWh (kilowatt hours) or MWh (megawatt hours). The energy is the power calculated over time. If, for example, your inverter operates at a constant output of 3 000 W for half an hour and then at a constant output of 2 000 W for another half hour, it has fed 2 500 Wh of energy into the grid within that hour. Power Power is measured in W (watts), kW (kilowatts) or MW (megawatts). Power is a momentary value. It displays the power your Sunny Tripower is currently feeding into the grid. PV Abbreviation for photovoltaics. Explanation of Symbols Visual inspection, maintenance and cleaning Glossary If you have technical problems, contact your installer. The following information is required in order to provide you with the necessary assistance: • Inverter device type • Inverter serial number • Type and number of PV modules connected • Event number or display message on the inverter • Optional equipment (e.g. communication devices) SMA Solar Technology AG Sonnenallee 1 34266 Niestetal, Germany www.SMA.de SMA Serviceline Inverters: +49 561 9522 1499 Communication: +49 561 9522 2499 Fax: +49 561 9522 4699 E-Mail: [email protected] Contact Installer contact

SUNNY BOY STPTL-20-AST-RM-xx-10 | Version 1.0 Spare-Part Set "Power Assembly" for Sunny Tripower 5000TL / 6000TL / 7000TL / 8000TL / 9000TL / 10000TL / 12000TL NR-STP90-5-AST / NR-STP90-6-AST / NR-STP90-7-AST / NR- STP90-8-AST / NR-STP90-AST / NR-STP100-AST / NR-STP120-AST

SMC6-8TL-BEN101210 | IME-SMCTL_60_70_80 | Version 1.0 EN PV Inverter SUNNY MINI CENTRAL 6000TL / 7000TL / 8000TL User Manual Installer contact CoNTACT If you have technical problems, first contact your installer. The following information is required in order to provide you with the necessary assistance: • Inverter device type • Inverter serial number • Type and number of PV modules connected • Blink code or display message of the inverter • Optional equipment (e.g. communication devices) SMA Solar Technology AG Sonnenallee 1 34266 Niestetal, Germany www.SMA.de SMA Serviceline Inverters: +49 561 9522 1499 Communication: +49 561 9522 2499 Fax: +49 561 9522 4699 E-Mail: [email protected] Visual inspection Check the inverters and the cables for visible external damage. Contact your installer if you find any defects. Do not perform any repair work yourself. Maintenance and Cleaning Have your installer check for proper inverter operation at regular intervals. VISUAL INSpECTIoN, MAINTENANCE ANd CLEANING ES Symbols on the Inverter Operation display. Ground fault or varistor defective. Please inform your installer. An error has occurred. Please inform your installer immediately. Tap to switch on the display light and switch to the next message. Symbols on the Type Label Beware of dangerous electrical voltage. The inverter operates at high voltages. All electrical work on the inverter may be carried out by qualified personnel only. erfolgen. Beware of hot surface. The inverter can become hot during operation. Avoid contact during operation. Observe enclosed documentation. The inverter must not be disposed of with the household waste. Further disposal information can be found in the enclosed installation guide. CE mark. The inverter complies with the requirements of the applicable EC guidelines. RAL quality mark for solar products. The inverter complies with the requirements of the German Institute for Quality Assurance and Labeling. Direct Current (DC) Alternating current (AC) The inverter is protected against penetration by dust particles and water jets from any angle. The inverter is transformerless. AC Abbreviation for "alternating current". dC Abbreviation for "direct current". derating A controlled reduction in performance, usually dependent on component temperatures. Compared with the (also common) practice of completely shutting down the device, the effect on the external grid is smaller with derating. Electronic Solar Switch (ESS) The Electronic Solar Switch is part of the inverter's DC switch-disconnector. The Electronic Solar Switch must be securely inserted into the bottom of the inverter and may only be removed by qualified personnel. Mpp (Maximum power point) Operational point of the inverter, dependent on current / voltage of the PV generator. The actual position of the MPP changes constantly, depending on the level of solar irradiation and the cell temperature. pV Abbreviation for photovoltaics. SMA power Balancer The SMA Power Balancer is a serial feature of the Sunny Boy. The SMA Power Balancer prevents the formation of an unbalanced load > 5 kVA (in Italy > 6 kVA) during three-phase grid feed-in. To this effect, 3 Sunny Mini Centrals are each connected via a control line to a 3-phase feeding unit. Varistor The varistors protect the electronics in the inverter from atmospherically coupled energy peaks, such as those that can occur in the event of nearby lightning strikes. ExpLANATIoN of SYMBoLS GLoSSARY

SUNNY TRIPOWER 5000TL / 6000TL / 7000TL / 8000TL / 9000TL / 10000TL / 12000TL STP 5000TL-20 / STP 6000TL-20 / STP 7000TL-20 / STP 8000TL-20 / STP 9000TL-20 / STP 10000TL-20 / STP 12000TL-20 STP5-12TL-20-IS-xx-14 | 98-137000.02 | Version 1.4

SUNNY BOY STPTL-20-CON-RM-xx-10 | 119831-00.01 | Version 1.0 Spare-Part Set "AC/DC Terminal Assembly" for Sunny Tripower 5000TL / 6000TL / 7000TL / 8000TL / 9000TL / 10000TL / 12000TL NR3-STP90-CONB / NR-STP90-CONB / NR3-STP90-CON / NR-STP90-CON / NR-STP100-CONB / NR-STP100-CON / NR-STP120-CONB / NR- STP120-CON