ST AN3311 Manuals

December 2010 Doc ID 18209 Rev 1 1/58 AN3311 Application note In-home display for ZigBee® smartplug Introduction This application note describes the demonstration firmware running on the STM3210C- EVAL for the STM32F107VC to manage a smartplug network system. An embedded graphical user interface (GUI) based on the “multi-input embedded GUI library 2.0 for STM32F10xxx” described in the AN3128 application note, and working on an LCD TFT 320 x 240 display and 5-position joystick, allows the user to interact with the smartplug system made up of one coordinator and two smartplugs connected. Section 1 describes the document and library rules. Section 2 highlights the features of the ZigBee smartplug and explains its hardware interface with a device microcontroller (STM32). Section 3 describes briefly the “multi-input embedded GUI library”. Section 4 describes the relevant blocks of the STM3210C-EVAL demonstration board. Section 5 shows the demonstration firmware/board system setup. Section 6 describes, in detail, how the “in-home display” firmware is structured, its architecture and its exported APIs. Section 7 explains how to get started with the system, how to configure and use the IAR workspace, and contains an example application source code. Section 8 illustrates how the “in-home display” GUI application works. Section 9 illustrates the hardware schematics. www.st.com