NEC LCD52V White Paper

Introduction The majority of hardware connected to Windows-based PC systems does not require a large amount of user configuration after its initial installation. Display monitors, however, are the notable exception. Today’s displays offer users vast control over their configuration, but this is often through cryptic front-panel controls ...

end-user software applications can set up the best possible display modes for their screens without having to reboot the PC to a known state. And, lastly, poorly configured monitors can cause unnecessary user eyestrain. Overall, DDC/CI’s main advantage i ...

correction; Moiré cancellation and convergence can also be adjusted · Even metadata such as the serial number or the date of manufacture can be easily displayed. · In addition, the refresh rate, desktop resolution, operating time and the pow ...

· time that the monitor has spent in power-on and standby modes (in hours) · polarity of the videosync signal · video frequency · current power status · current video timing · current color mode · whether power-save has been activated · OSM lock status · diagnostic data · power-off timer settings Many practical uses result fro ...

signals to the central control when an LCD monitor is being operated at more than 60 Hz or with a non-native desktop resolution. In the case of a CRT monitor, NaViSet Administrator sends an alarm message when a frequency of less than 60 Hz is being e ...