Sub-Zero 601R Manuals

Dimensions in parentheses are in millimeters unless otherwise specified. B U I LT - I N R E F R I G E R A T I O N 18 A N T I - T I P B L O C K I N G K I T To prevent the unit from tipping forward and to provide a stable installation, the unit must be secured in place with an anti-tip blocking kit. If there is a solid soffit above the unit with clear- ance between the unit and the soffit of 1" (25) or less, you won‘t need to block the unit. But for installations with clearances of more than 1" (25), you must block the unit with the anti-tip blocking kit (wood block and hardware) provided with each Sub-Zero Built-In model. Refer to the Built-In Installation Instructions packed with the appliance, which provides step-by-step proce- dures for making sure the unit is installed properly. A D D I N G P A N E L S In your plan for panels, be sure you are working with the Sub-Zero panel design family called for in your design. If you have chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install door panels. Specifications on the following pages provide panel dimensions and installation considerations for framed and overlay door panels. Side panels can be used with the framed, overlay and stainless steel design applications. Refer to specifications on page 26. F R A M E D D O O R P A N E L S If you and your client have ordered a framed design model, you will be adding panels to give the unit the custom Sub-Zero look. The framed panel design option is available on all Built-In units except Models 648PRO and 648PROG. For exact door panel dimensions for Built-In framed models, refer to the Framed Panel Specifications on pages 20–21. Also refer to the full-scale illustrations at the end of this section for panel and handle considerations. The traditional framed models come with an elegant, smooth, full-length handle. Optional extended full-length handles that provide additional finger clearance for raised panels are available through your Sub-Zero dealer. If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the total thick- ness to 1/4" (6). If the panel is thicker than 1/4" (6), an edge must be routed around the panel to ensure a proper fit. Refer to illustrations 1 and 2. IMPORTANT NOTE: On all framed models, routing, recessing or optional extended handles may be required on raised panels for finger clear- ance under the handle. Refer to the full-scale illustrations at the end of this section. For glass door Models 601RG, 611G and 650G, the refrigerator door panel must include a cut- out to accommodate the window. Refer to the Framed Panel Specifications on pages 20–21. IMPORTANT NOTE: On glass door models, the glass portion of the door must be exposed and not covered by any part of the panel. For Models 685 and 695, the refrigerator door panel must include a cut-out to accommodate the glasswell and bezel. The thickness of the panel in this area can range from 1/4" (6) to a maximum of 11/8" (29). If the panel is thicker, provisions must be made to rout out a space to accommodate the decorative bezel surrounding the glasswell. PANELS THICKER THAN 1/4" (6) Trim reveal 1/4" (6) min Rout to 1/4" (6) thickness PANELS 1/4" (6) THICK OR LESS 1/4" (6) Panel Trim reveal 1/4" (6) min Illus. 2 Illus. 1 A C C E S S O R I E S Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com.

INSTALLATION INSTRUCTIONS

600 I N S T A L L A T I O N G U I D E 6 0 0 S E R I E S ®

USE 8< CARE INFORMATION

SERIES 600SERIES Use & Care Guide Use & Care Guide ®

D E S I G N G U I D E

B U I L T - I N R E F R I G E R A T I O N USE & CARE INFORMATION

BUILT-IN DESIGN GUIDE

INSTALLATION INSTRUCTIONS B U I L T - I N R E F R I G E R A T I O N