Tandberg Data StorageLoader 2U LTO Manuals

StorageLoader 2U LTO Quick Start Guide Accessories — These accessories are included with your library * LVD SCSI configuration only. Important: Both LTO-2 and LTO-3 tape drives require Ultra 160 rated SCSI cabling, and an Ultra 3 or LVD 160 Active SCSI terminator. The StorageLoader 2U LTO ships from the factory with these accessories. ** To prepare your own labels, refer to the Tandberg Data Bar Code Label Specification for LTO Cartridges available at: www.tandbergdata.com. Additional Items — You must have -or- obtain some or all the following items to complete the installation Host computer with adapter card installed You need a host computer with a host bus adapter card installed. Refer to the documentation that came with the computer and LVD SCSI or Fibre Channel (FC) adapter card. The StorageLoader 2U LTO is configured for LVD SCSI or Fibre Channel. Important: Both LTO-2 and LTO-3 tape drives are Ultra 160 SCSI devices and require a minimum Ultra 160 non-RAID SCSI host bus adapter card (LVD SCSI configuration only). Hybrid cable If your SCSI controller has a 68-pin VHDCI connector, you will need to obtain a VHDCI-to-HD SCSI cable. Tools You will need a #1 Phillips screwdriver. Fibre Channel cable If you have a Fibre Channel adapter card installed, you need to obtain a FC cable. Power cord (for use outside Europe) If you plan to use the library outside Europe, you must supply your own power cord (see the Product Manual at www.tandbergdata.com for information about an International 220 VAC power cord). Backup software You need a backup software application to manage your backup operations. Refer to the documentation that came with the backup software and make sure it supports the library. See www.tandbergdata.com for compatibility information. Data and Cleaning cartridges (available from Tandberg Data or your supplier) WARNING! The library weighs 44 lbs (20 kg). Two people are needed to move or lift the library. Most of the weight is toward the back of the library. WARNUNG! Die Library wiegt 20 kg. Es sind mindestens 2 Personen erforderlich, um die Library zu bewegen oder zu heben. Der hintere Teil der Library hat das Größte Gewicht. ¡PRECAUCIÓN! La biblioteca montada sobre bastidor pesa 20 kg. Se necesitan dos personas para mover o levantar la biblioteca. La parte trasera de la biblioteca es la de mayor peso. Page 1 of 8 Tape Ultrium 3 (slate blue) Ultrium 2 (purple) Ultrium 1 (black) LTO Ultrium Drive Read Write Read Write Read Write Cleaning Cartridge LTO-3 Yes Yes Yes Yes Yes No Yes LTO-2 No No Yes Yes Yes Yes Yes HD Connector VHDCI Connector Power cord Bar code labels** Multi-language packet and Warranty Rack-mount kit (fasteners and instructions included) Shipping lock Ethernet cable LVD SCSI 68-pin HD to HD cable and LVD terminator*