Tandberg Data StorageLoader 2U LTO Quick Start Manual

Quick Start Guide Accessories — These accessories are included with your library * LVD SCSI configuration only. Important: Both LTO-2 and LTO-3 tape drives require Ultra 160 rated SCSI cabling, and an Ultra 3 or LVD 160 Active SCSI terminator. The StorageLoader 2U LTO ships from the factory with these accessories. ** To prepare your ow ...

Quick Start Guide Step 1 — Before you begin 1 — Ensure that you have all the required items before you proceed (see Accessories and Additional Items on page 1). 2 — Locate an appropriate area for the unit that has adequate clearance for ventilation, minimal dust and debris, and an appropriate power source. The unit is designed for ...

Quick Start Guide Page 3 of 8 Step 4 — Powering on and Removing the Shipping Lock Shipping Lock 1 — Power on the library by pressing the power switch on the back of the unit (press the I). When you apply power with the shipping lock installed, the library displays a message and ejects both left magazines. 2 — Pull the left magazine ...

Quick Start Guide Page 4 of 8 Step 4 continued — Powering on and Removing the Shipping Lock TOP VIEWS FOR REFERENCE ONLY Important: Some views show the library with the top cover removed for clarity —DO NOT remove the top cover or you will void your warranty! 5 — Rotate the robot by pushing the lock handle toward the back of the li ...

Quick Start Guide Page 5 of 8 Step 5 — Adding bar code labels and loading cartridges 1 — Apply bar code labels to cartridges. 2 — Press the eject button to unlock the magazine (magazine releases and moves a short distance out of the library). This may take a few minutes. 3 — Pull the magazine straight out of the library (no side- ...

Quick Start Guide Left Magazine Eject Right Magazine Eject I/E Port Release I/E Port Home Screen Home Screen Menu and Buttons Page 6 of 8 Home Screen Buttons Function OK Accept the change Select Accept the choice Back Return to previous screen Exterior Buttons Function I/E Port Unlock I/E Port Magazine Unlock magazine Home Screen Menu Dr ...

Quick Start Guide Page 7 of 8 Troubleshooting Tips If the library did not power on as described • Is the power cord inserted correctly and is the power switch on (press the I on the back of the unit)? • Did you remove the shipping key? If the library displays an error on the front panel Refer to the Product Manual for a list of err ...

Quick Start Guide Page 8 of 8 IMPORTANT! Before moving or shipping the library, you must first “Park the Robot” and replace the shipping key or you will void your warranty. • From the library’s front panel, press the Maint / Library Maintenance / Park the Robot buttons. • After you receive the confirmation message (Park for Shi ...