Thomas & Betts Elastimold 274FT Manuals
1 pdf manual(s) Thomas & Betts Elastimold 274FT for free download (Document Types: Operating instructions)
Thomas & Betts Elastimold 274FT Operating instructions [PDF] (4 pages)
- Identifier: id-1469616
- Brand: Thomas & Betts
- Device: Elastimold 274FT Industrial Equipment
- Type: PDF
- Key Aspects: End-of-Life Handling and Disposal, Standard Operating Procedures, Hardware Verification Checklists
- UPD Date: 23.08.2026
- Source File: 1528824.pdf
- Pages: 4
- Description: Device instruction guide for the Thomas & Betts Elastimold 274FT.
Click to expand and read text
IS---0797 IS---274FT(1) January 2010 Page 1 of 4 Operating Instructions 274FT(1) Feed--Thru/Grounding Device CONTENTS: Feed--thru body complete with mounting hardware, Lubricant, Operating Instructions. The feed thru provides interconnected apparatus interfaces for Elastimold 25kV class (15.2kV phase--to--ground and 26.3kV phase--to--phase) loadbreak connections and can be used for the following functions: A. A junction point. B. A grounding point. To use the feed--thru as a junction point, follow steps 1 to 5 and 6A and 7A. To use the feed--thru as a grounding point, follow steps 1 to 5 and 6B to 9B. A yellow band provides indication of full elbow seating and also provides vents for improved switching performance. This product is identified by a yellow ID washer attached to the eyebolt. DANGER All apparatus must be de--energized during installation or removal of part(s) except for test point caps and indicators that can be installed and operated energized. After installation loadbreak products can be operated energized per operating instructions. All deadbreak connectors must be de--energized before operating. All apparatus must be installed and operated in accordance with individual user, local, and national work rules. These instructions do not attempt to provide for every possible contingency. Do not touch or move energized products. “Loadbreak connectors must be operated with a full insulated “hotstick” type live--line tool.” Consult the company’s safe work practices for the required live--line tool length. Excess distortion of the assembled product may result in its failure. Inspect parts for damage, rating and compatibility with mating parts. This product should be installed only by competent personnel trained in good safety practices involving high voltage electrical equipment. These instructions are not intended as a substitute for adequate training or experience in such safety practices. Failure to follow these instructions will result in damage to the product and serious or fatal injury. If this product is supplied with a protective shipping cover(s), remove this shipping cover(s) and replace with the appropriate HV insulated cap(s) or connector(s) before submerging or energizing the circuit. FOR MORE INFORMATION ON PARTS, INSTALLATION RATINGS AND COMPATIBILITY, CALL THE NEAREST ELASTIMOLD OFFICE. IMPORTANT 1. Check contents of package to ensure they are complete and undamaged. 2. Check all components to ensure proper fit with cable and/or mating products. 3. Read entire installation instructions before starting. 4. Have all required tools at hand and maintain cleanliness throughout the procedure. STEP 1 Grounding-- Insert ground lead into the grounding lug provided on the mounting hardware and tighten lug. Ground lead should be No. 14 copper wire or equivalent. Connect the opposite end of the lead to ground, leaving enough slack to operate with a hotstick. IS---0797 IS---274FT(1) January 2010 Printed in U.S.A. 8155 T&B Boulevard, Memphis, Tennessee 38125 (800) 888--0211 Fax: (800) 888--0690 Ground Lug No. 14 Copper Wire To Ground Yellow Seating Indicator and Vent Ring Yellow ID Washer
Elastimold 274FT: Related Instructions
IS---0359 IS---375/376LR March 2010 Page 1 of 4 Installation & Operating Instructions 375LR (without test point) 376LR (with test point) Loadbreak Elbow Connect Complete usage guide for the Thomas & Betts elastimold 375LR Cables and connectors. The document offers guidance on performance guidelines, technical specifications, installation steps, technical troubleshooting.
INSTALLATION INSTRUCTIONS 1. Strip the insulation from cable to the length shown in table on reverse side. Be careful not to nick cable strands which may later Product operation manual for the Thomas & Betts COPPER COLOR-KEYED LUGS Cables and connectors. This manual covers installation, operation, and installation support, firmware updates, user instructions.
Portable Outdoor Floodlight Installation Instructions For Outdoor use ONLY! K780 and K780BR IMPORTANT SAFEGUARDS: Please read and understand all instructions be Stepwise user guide for the Thomas & Betts Red Dot SiteLight K780 Flood Light. It describes maintenance tasks and operation, service instructions, maintenance, diagnostic information.
TA02966 E page 1 of 8 IMPORTANT: Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. User reference guide for the Thomas & Betts BPLT14BSCRI Crimp tool. It details operating modes and device features, warranty information, error handling.
TOP PLATE INSTALLATION INSTRUCTIONS FOR CONCEALED SERVICE FLOOR BOX Catalog Number: 665-AV2 IMPORTANT: Read all instructions before installing floor box, carpet Device maintenance guide for the Thomas & Betts 665-AV2 Fan. This guide provides information on product safety, usage procedures, basic operation, user settings.
Figure 1 NOTE: For convenience, before placing wire(s) in the connector, partially close the handles of the tool until indentor die touches the connector. IMP User support guide for the Thomas & Betts COMFORT CRIMP SHURE STAKE ERG4811 Power Tool. This manual explains usage procedures, component overview, product specifications, safety information.
Similar Manuals in the Industrial Equipment Category
ADCP-90-297 Issue 7 July 2006 1376806 Rev A NG3™ High-Density Fiber Distribution Frame System Termination, Termination/ Splice, and VAM Panels User Manual Instruction guidebook for the ADC NG3 Industrial Equipment. It explains maintenance and safety features, assembly reference, software installation, device features.
SINUMERIK SINUMERIK 840D sl/828D Job planning Programming Manual Valid for Control system SINUMERIK 840D sl / 840DE sl SINUMERIK 828D Software Version Full operation manual for the Siemens SINUMERIK 840D sl DC Drives. It explains maintenance and hardware components, product safety, menu navigation.
PowerFlex Active Front End – Frame 13 Catalog Number 20Y PowerFlex AFE/PowerFlex 700AFE (400V/480V and 600V/690V) Hardware Service Manual Original Instruction User and installation guide for the Rockwell Automation Allen-Bradley PowerFlex AFE Industrial Equipment. This manual offers stepwise instructions for interface navigation, maintenance, system parameters.
User Manual | Simpro MegaDumper® Original Instructions | English | v44.0 | March 2019 USER MANUAL S i m p r o M e g a D u m p e r ® Step-by-step user manual for the Simpro MegaDumper Lifting Systems. It covers technical troubleshooting, technical specifications, performance optimization, operating conditions.