-
Manual Issue 1.0
1
-
UltraSync ONE User Guide
2
-
Welcome to UltraSync ONE
3
-
Chapter 3 Quick Set Up
4
-
Chapter 6 BLINK Hub
5
-
UltraSync ONE for Synchronisation
10
-
Switch UltraSync ONE On and Off
11
-
To switch your UltraSync ONE off:
12
-
Display and Controls
13
-
Status Indicator LED
14
-
Up and Down
15
-
DIN 1.0/2.3 to BNC Cables
17
-
Charging your UltraSync ONE
18
-
Mounting your UltraSync ONE
19
-
55mm × 44mm × 17mm (width × height
20
-
Multi Channel Digital Transceiver
21
-
Master and Slaves
24
-
What if a Slave Cannot Find a Master?
26
-
Example:UltraSync ONE Out or Range of Master
27
-
Multiple Masters in the Same Network
28
-
EXT LTC Input
36
-
EXT LTC Input, Output to RF Slaves
37
-
EXT LTC Input, Output to Wired Devices
38
-
Free Running and Jamming
39
-
Jamming to an External Timecode Source
40
-
Output via SYNC
42
-
Preparation - Before you Set Up your UltraSync ONE
44
-
Getting Started - Master TX Mode
45
-
Getting Started - EXT LTC Input
46
-
Master to RF Slaves and Wired Devices
47
-
To set up your UltraSync ONE as a Master TX:
48
-
Master to Wired Device Only, No RF Slaves
50
-
Run UltraSync ONE as an RF Slave
52
-
How does an RF Slave Synchronise with a Master?
54
-
Set UltraSync ONE to use LTC as an Input
56
-
7. Choose the LTC Input mode:
57
-
Send Timecode from a Standalone UltraSync ONE
59
-
To do this, complete the following steps:
60
-
Jam UltraSync ONE to a Signal
61
-
Set the RF Country/Area
64
-
Set the Timecode Mode
65
-
UltraSync ONE receives its timecode
66
-
9. If you are prompted to choose TX On or TX Off:
67
-
Set the RF Channel
68
-
Example 2: Multiple RF networks in range
70
-
Example 3: Replacing a Master in an RF Network
71
-
Set the Timecode for the Master
72
-
Set the Frame Rate Per Second
73
-
Set the User Bits
74
-
5. Use the Up and Down buttons to choose from:
75
-
Set the SYNC Output
76
-
8. Press the Select button.
77
-
Set the LTC Level
78
-
Change the Status Indicator LED Brightness
79
-
Change the Screen Brightness
80
-
Change the Screen Saver Time
81
-
Flip the Display
82
-
Version Number and Serial Number
87
-
Power and Battery Status
88
-
SYNC Output Status
90
-
LTC Output Status
91
-
Remote Settings using BLINK Hub
94
-
Use of External Antenna(s)
97
-
Industry Canada Statements:
98
-
EC Declaration of Conformity
99
-
UltraSync ONE Slave not Connecting to Master
103
-
UltraSync ONE Battery not Charging
104
-
Restore Factory Settings
105
-
Battery Safety and Disposal
110
-
requirements for battery disposal and recycling.
111
-
Always On 81
113
-
External antenna 97
114
-
OLED 13, 20
115
-
SYNC output 20, 76
116
-
Unit 6, Elgar Business Centre, Hallow
118
