Toa N-8031SB Manuals

Project ________________________________________ City ________________________________ State __________ Bid Date __________ c Airport c Correctional c Educational c Parking Garage c Retirement Center c Security c Other SYSTEM COMPONENTS Model Description Quantity Price Total N-8000EX IP intercom exchange,16 station capacity, four speech links, 80 max.per system N-8010EX IP intercom exchange, 16 station capacity, one speech link, 80 max. per system N-8000MI IP Intercom multi-interface, 2 audio line inputs, 2 audio line outputs , 16 control I/O, PBX I/F, EXES 2000/6000 tie-line I/F (TI-600 also required for EXES) TWOWIRE STATIONS CONNECT TO N8000EX OR N8010EX N-8000MS Master station, LCD, handset, speed-dial N-8010MS Master station, handset, economy N-8011MS Master station, hands free N-8020MS Master station, industrial-grade, handset N-8031MS Master station, flush-mount, hands free, external switch input for footswitch speed-dial N-8050DS Door sub-station, logic output for door control, fits 3-gang electrical box Q-N-8050WP Door station, outdoor, logic output for door control, fits 3-gang electrical box N-8031SB PCB, Master station, N-8031MS, for custom station applications N-8050SB PCB, Door station, N-8050DS, for custom station applications IP STATIONS CONNECT DIRECTLY TO NETWORK N-8500MS IP Master station, LCD, handset, speed-dial, Power-over-Ethernet N-8540DS IP Door station, flush/surface-mount, contact output, Power-over-Ethernet Q-N-8540WP IP Door station, outdoor, flush/surface-mount, contact output, Power-over-Ethernet AD-1210P AC power supply for N-8500MS/N-8540DS (for non-PoE network switches) MOUNTING HARDWARE AND ACCESSORIES E-7000TB Terminal Board, 40-station capacity YC-150 Back-box, flush-mount for N-8050DS/N-8540DS YC-241 Back-box, flush-mount for N-8031MS YC-251 Back-box, surface-mount for N-8031MS YC-280 Wall mount bracket for N-8000MS, N-8010MS, N-8020MS YC-290 Wall mount bracket for N-8011MS YS-13A Back-box, surface-mount for N-8500MS/N-8540DS ESTIMATE WORKSHEET N-8000 IP Network Intercom Systems Dealer _________________________________________ Suggested Total $ ___________ City ________________________________ State ______ TOA provides this worksheet as a design aid. The bidding contractor is solely responsible for cost estimates and for meeting specified project requirements.

IP NETWORK INTERCOM SYSTEM DESCRIPTION FEATURES ● ● ● ● ● ● ● ● The N-8000 Series is a packet intercom system (IP network compatible intercom) employing packet audio technology* 1. By connecting IP intercom exchanges (which can connect up to 16 stations per exchange), Multi interface units and IP Stations to a network (LAN or WAN), an optimal system can be constructed for in-house or wide area information communications such as duplex conversations between stations, periodical broadcasts, and BGM broadcasts. A basic N-8000 Series system is comprised of an intercom exchange unit such as the N-8000EX IP Intercom Exchange. Stations are available in different configurations with different features: Master Stations: N-8000MS Multifunctional Master Station, N-8010MS Standard Master Station, N-8011MS Hands-Free Master Station, N-8020MS Industrial Use Master Station, N-8031MS Wall Mount Master Station and for network applications, N-8500MS IP Master Station. Door Stations: N-8050DS Door Station, N-8540DS IP Door Station Up to 80 exchanges, multi interface units and IP stations can be combined. When 80 exchanges are used, systems of up to 1,280 stations can be realized. The system's "echo cancellation"* 2 feature makes hands-free duplex conversation possible (conversations made without using a handset at both parties) between stations. In addition, the multi interface unit features a contact bridge function to be performed by way of contact input and output control. *1 Technology related to audio transmission over a network. *2 A circuit that prevents acoustic feedback or echo generated when the voice output from the station's internal speaker enters the microphone. Exchanges, Multi Interface units and IP Stations can be distributed over a data communications network. Can be connected to an existing local area network (LAN) or wide-area network (WAN). The system can also be easily connected to fiber-optic networks without restrictions on operating distance. Two types of exchanges are available: N-8000EX; 4 internal and 8 external speech links with PA paging output. N-8010EX; 1 internal and 2 external speech links without PA paging output. System configured employing IP stations make communications possible without having to use an exchange unit. (IP Door Stations alone cannot be configured into systems without incorporating a IP Master Station.) The dedicated software program enables centralized control with a personal computer. System maintenance (verifying operation log and Line supervision) can also be performed with a personal computer and Internet browser. Can be connected to the Exchange of the EXES-2000 or EXES-6000 Intercom System by a tie-line, or the PBX exchange via the E&M lead signaling interface. The Multi Interface unit can interlock with an electronic lock system or CCTV surveillance system by way of contact input/output control function. Master Stations IP Master Station IP Door Station Door Station IP Network Intercom Exchange Multi Interface Unit N-8000EX/N-8010EX N-8000MI N-8011MS N-8031MS N-8500MS N-8000MS N-8540DS N-8050DS N-8020MS N-8010MS RS-191 Board Unit N-8031SB N-8050SB

CN306 CN307 CN304 CN101 CN302 CN303 To CN303 To CN301 CN301 COM C 9 8 7 Push down. Cable Conductor diameter: ø 0.8 – 1.3 mm (AWG16 – 20), Solid or Stranded wire CN306 CN306 8 mm [Connections] 5.2. External Dial Switch Connection Connecting external switches such as footswitches permits them to perform the same operation as the dial keys "7," "8," "9," and "C". An electrical current of 1 mA flows through each contact. Note The cable length from the external switch should not exceed 3 m. 2-pin removable terminal plug (accessory, factory-attached to the CN101) CN101 1 2 Removable terminal plug (accessory) N-8031SB Insert into the CN101's pin header. Tighten 1 2 To N-8000EX/8010EX Exchange 16 lines N-8031SB [Connections] 5.1. Connection to the Exchange Connect the CN101 terminal to the Exchange's network connection terminal via the E-7000TB Terminal Board. For details, read the installation manual supplied with the Exchange. 5.5. Status Indicator (LED) Connection Use an LED with high brightness. Connect a keyboard of which circuit configuration is as shown in the figure. An electrical current of 1 mA flows through each contact. 5.3. Dial Key Connection Hands-free speaker (accessory) Hands-free microphone (accessory) Note For the CN304 connection, use the XHP-2 connector manufactured by J.S.T. Mfg. Co., Ltd. or equivalent. 10 1 CN307 CN302 RS-191 rear Ferrite clamp (accessory) Handset cable 1 2 Note Run the cables along the ferrite groove, and clamp them. 5.4. RS-191 Connection Connecting the RS-191 Option Handset to the N-8031SB permits handset conversation. Handset jumper (accessory, factory- attached to the CN302) Note For the CN307 connection, use the PHR-10 connector manufactured by J.S.T. Mfg. Co., Ltd. or equivalent. (Internal circuit) 1 kΩ CN304 Status indicator (LED) 2 1 Control IC TTL level output +5 V DC FUNCTION RESP. CALL HOLD REDIAL PTT C 0 TRANSFER 1 2 3 4 5 6 7 8 9 10 9 8 7 6 5 4 3 2 1 Cable Bared end: 7 mm Conductor diameter: ø 0.4 – 1.6 mm (AWG14 – 26), Solid or Stranded wire Mini-clamp connector (Supplied with the Exchange) Twisted pair cable Note Be sure to use the accessories. Socket Note Though the socket on the PC board is faced inside, you can insert the handset jumper into the socket from the side. INSTALLATION MANUAL MASTER STATION BOARD N-8031SB 1. GENERAL DESCRIPTION The N-8031SB is a printed circuit board unit for the N-8031MS Flush-Mount Hands-Free Master Station. You can make the master station suitable for applications using the N-8031SB in combination with the operation panel section to be prepared separately. 3. SPECIFICATIONS 2. DIMENSIONAL DIAGRAM Use the N-8000 software* to perform settings. Set up the same items as performed to the N-8031MS since the N-8031SB is handled as the N-8031MS on the software. Key and status indicator operations are exactly the same as those of the N-8031MS. For settings, functions, and operations, read the descriptions about the N-8031MS in the N-8000 Series instruction manual*. * Included in the CD supplied with the N-8000EX/8010EX Exchange. 4.1. Installation Precautions • To prevent a malfunction or breakdown due to static electricity, be sure to use a metal case or metal panel, and screw the board at the indicated hole, so that the board is electrically conducted to the case or panel. 4. MOUNTING TO A METAL CASE OR PANEL • Cover the whole board with a case when installing. 4.2. Speaker and Microphone Installation • To prevent acoustic feedback, attach the speaker and microphone closely to the panel and position them at least 16cm away from each other's center as shown below. Printed in Japan 133-06-273-90 20.6 Mounting hole 6-ø3.5 1.6 70 52 52 115 7 185 26 ø57 90 [Side] [Hands-free speaker] [Hands-free microphone] 2.1. N-8031SB 2.2. Accessory [Front (Component side)] Unit: mm CN306 CN307 CN304 CN101 CN302 CN303 CN301 8.5 ø9 195.5 57 N-8031SB N-8031SB Board fixing screw Metal case or metal panel Case or panel Microphone 16 cm or more Speaker • Speaker opening ratio should be 36% (Example: ø4 mm x 61 holes) as a guide. • Keep the board from coming in contact with the speaker to avoid short-circuit between them. • Make a microphone opening with the microphone rubber's inside diameter (ø4.5 mm), and position the microphone in the way that its center comes to the opening center. • Never install them as shown below. Doing so may cause the speaker sound to enter the microphone. Case or panel Microphone Speaker Case or panel Microphone Sound enters the microphone. Sound enters the microphone. Speaker 5. CONNECTIONS 48 V DC (supplied from the N-8000EX/8010EX IP Intercom Exchange) 1.8 W (rated), 2.4 W (max.) Non-polar one pair stranded wire system 2-wire 160 kbps echo canceller transmission system Under 0 dB* Hands-free conversation (Handset conversation can be established in conjunction with the RS-191.) 300 – 7,000 Hz Max. 1,500 m (ø 0.65 mm, Loop resistance 170 Ωor less) Speaker (accessory): 5.7 cm cone-type, 0.6 W, 8 Ω Microphone (accessory): Omni-directional electret condenser microphone Pin header (2 pins) Power Source Power Consumption Wiring Method Transmission System Signal Level Speech Method Audio Frequency Range Transmission Range Hands-Free Line Connection Terminal Solderless connector (2 pins, male), voltage: 5 V, maximum load current: 5 mA Solderless connector (10 pins, male), open voltage: 3.3 V DC, short-circuit current: 1 mA, screwless connector (5 pins) No-voltage make contact input, open voltage: 5 V DC, screwless connector (5 pins) 0°C to +40°C Under 90% RH (no condensation) 70 (w) x 185 (h) x 20.6 (d) mm 205 g (including accessories) Removable terminal plug (2 pins, preinstalled on the unit) ... 1, Handset jumper (8 pins, preinstalled on the unit) ... 1, Ferrite clamp ... 1, Hands-free speaker (with connection cord) ... 1, Hands-free microphone (with connection cord) ... 1 Status Indicator LED Connecting Terminal Dial Input External Dial Input Operating Temperature Operating Humidity Dimensions Weight Accessories * 0 dB = 1 V Note: The design and specifications are subject to change without notice for improvement.