Ublox C099-F9P Manuals

Setup 1. Download the u-center evaluation software and documentation from www.u-blox.com/u-center. 2. Connect the provided ANN-MB GNSS antenna to the ZED-RF connector. Ensure good signal reception. 3. Connect the board to a Windows PC via the USB port; this will power the board. The driver will install automatically from Windows Update when the board is connected the first time. 4. Start u-center and connect to the COM port identified as “C099 application board, ZED-F9P” using the Device Manager. Set the baudrate to 460800 baud. 5. u-center should display the received signals now. The TP LED will blink in a blue color. 6. To set up an RTK connection in u-center, select the menu item “Receiver” > “NTRIP client...” and enter the mount point settings you have received from your correction service provider. (See the other leaflet if included.) 7. In the Data View of u-center, the Fix Mode should change from “3D” to “3D/DGNSS” when RTCM corrections are received. The RTK LED will blink in a green color. 8. Eventually, the status will change to “3D/DGNSS/FIXED” and the RTK LED will show a steady green color. See the C099-F9P User Guide for further instructions. C099-F9P Quick Start Copyright © 2019, u-blox AG UBX-18052242 - R04 ZED-F9P module USB port ZED-RF connector ZED-F9P LEDs

C099-F9P Application board (rev. C), ODIN-W2 Mbed™ FW User guide Abstract The C099-F9P board enables customers to evaluate RTK operation with the ZED-F9P high precision GNSS receiver. The board provides short-range wireless connection via Bluetooth® or Wi-Fi for receiving correction data and logging via wireless connectivity. www.u-blox.com UBX-18063024 – R11