VAT 29 Series Manuals

Installation, Operating & Maintenance Instructions Series 29, DN 25 - 50 (I.D. 1" - 2") VAT Vakuumventile AG, CH-9469 Haag, Switzerland Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected] www.vatvalve.com 257676ED 2006-05-11 1/13 Angle & Inline Valve with soft-pump function with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): Angle valves: 29028-KA/H/E/11/21/31/41 29032-KA/H/E/11/21/31/41 29034-KA/H/E/11/21/31/41 Inline valves: 29128-KA/H/E/11/21/31/41 29132-KA/H/E/11/21/31/41 29134-KA/H/E/11/21/31/41 The fabrication number is indicated on each product as per the label below (or similar): made in Switzerland Fabrication No.: patented . . 29 . . . – . . . . – . . . . / . . . . A – . . . . . . Fabrication number Explanation of symbols: Read declaration carefully before you start any other action! Keep body parts and objects away from the valve opening! Attention! Hot surfaces; do not touch! Product is in conformity with EC guidelines, if applicable! Loaded springs and/or air cushions are potential hazards! Disconnect electrical power and compressed air lines. Do not touch parts under voltage! Wear gloves! Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General Safety Instructions» carefully before you start any other action!