Vertiv Avocent ACS8000 Manuals

Avocent® ACS800/8000 Advanced Console Server Installer/User Guide

590-1483-501A 1 Avocent® ACS8000 Advanced Console System Quick Installation Guide SECURITY WARNING! The ACS8000 Advanced Console System provides extensive access to its connected devices. As a result, care must be taken to avoid compromising your security policies. From the factory, this equipment is shipped with the following settings: • DHCP, SSHv1, SSHv2, HTTP and HTTPS are enabled. • The MODEM, USB and serial ports are disabled. • The Ethernet and CONSOLE ports are enabled. • Two default users with passwords: root/linux admin/avocent • Shell access for root and admin is enabled. Changing the default password and selecting a security profile immediately after initial setup is strongly recommended. Please consult the console system’s installer/user guide for more information. 1. Rack mounting the console system For rack mounting instructions, see the Avocent® ACS8000 Advanced Console System Rack Mounting Guide. 2. Connecting to your network The LAN ports on the left are for copper interface connections while the LAN ports on the right are for fiber interface connections. You may connect to either or both network ports for redundancy, however only one LAN1 and one LAN2 port may be used at the same time. If both LAN1 or LAN2 ports are connected, the fiber connection will have priority. For copper connections, connect a CAT 5e or CAT 6 cable from the 10/100/1000BaseT port to your network. For fiber connections, connect an appropriate SFP module to each end of a fiber optic cable. Insert one end into the fiber port on the console system and connect the other end to your network. 3. Connecting devices Using CAT 5e or CAT 6 cables and DB9 or DB25 console adaptors, connect the appropriate serial and power devices to the serial ports on the console system. NOTE: The first two ports are multi-protocol and may be used for RS485, RS422 or RS232 interface connections. The remaining ports use the RS232 interface. 7 6 9 4 5 2 8 3 48-port model shown

AVOCENT® ACS8000 CELLULAR ADVANCED CONSOLE SYSTEM Quick Installation Guide 590-1483-501D 1 1. Rack mounting the console system For rack mounting instructions, see the Avocent® ACS8000 Advanced Console System Rack Mounting Guide. 2. Connecting to your network The LAN ports on the left are for copper interface connections while the LAN ports on the right are for fiber interface connections. You may connect to either or both network ports for redundancy, however only one LAN1 and one LAN2 port may be used at the same time. If both LAN1 or LAN2 ports are connected, the fiber connection will have priority. For copper connections, connect a CAT 5e or CAT 6 cable from the 10/100/1000BaseT port to your network. For fiber connections, connect an appropriate SFP module to each end of a fiber optic cable. Insert one end into the fiber port on the console system and connect the other end to your network. 3. Connecting devices Using CAT 5e or CAT 6 cables and DB9 or DB25 console adaptors, connect the appropriate serial and power devices to the serial ports on the console system. NOTE: The first two ports are multi-protocol and may be used for RS485, RS422 or RS232 interface connections. The remaining ports use the RS232 interface. ACS8000 Advanced Console System with all options shown. Options vary depending on the model. No model has all options shown. SECURITY WARNING! The ACS8000 Advanced Console System provides extensive access to its connected devices. As a result, care must be taken to avoid compromising your security policies. From the factory, this equipment is shipped with the following settings: • DHCP, SSHv1, SSHv2, HTTP and HTTPS are enabled. • The MODEM, USB and serial ports are disabled. • The Ethernet and CONSOLE ports are enabled. • One default user admin. The first time you log in, you are prompted to create a password. • Root user is disabled. • Shell access for admin is enabled. Selecting a security profile immediately after initial setup is strongly recommended. Please consult the Avocent® ACS800/8000 Advanced Console System Installer/ User Guide for more information. 10 2 7 6 5 9 4 8 3 10

Avocent® ACS8000 Advanced Console System Quick Installation Guide 590-1483-501E 1 10 2 7 6 5 9 4 8 3 10 SECURITY WARNING! The Avocent® ACS8000 advanced console system provides extensive access to its connected devices. As a result, care must be taken to avoid compromising your security policies. From the factory, this equipment is shipped with the following settings: • DHCP, SSHv1, SSHv2, HTTP and HTTPS are enabled. • The MODEM, USB and serial ports are disabled. • The Ethernet and CONSOLE ports are enabled. • One default user admin. The first time you log in, you are prompted to create a password. • Root user is disabled. • Shell access for admin is enabled. Selecting a security profile immediately after initial setup is strongly recommended. Please consult the Avocent® ACS800/8000 Advanced Console System Installer/User Guide for more information. 1. Rack mounting the console system For rack mounting instructions, see the Avocent® ACS8000 Advanced Console System Rack Mounting Guide. 2. Connecting to your network The LAN ports on the left are for copper interface connections while the LAN ports on the right are for fiber interface connections. You may connect to either or both network ports for redundancy, however only one LAN1 and one LAN2 port may be used at the same time. If both LAN1 or LAN2 ports are connected, the fiber connection will have priority. For copper connections, connect a CAT 5e or CAT 6 cable from the 10/100/1000BaseT port to your network. For fiber connections, connect an appropriate SFP module to each end of a fiber optic cable. Insert one end into the fiber port on the console system and connect the other end to your network. 3. Connecting devices Using CAT 5e or CAT 6 cables and DB9 or DB25 console adaptors, connect the appropriate serial and power devices to the serial ports on the console system. NOTE: The first two ports are multi-protocol and may be used for RS485, RS422 or RS232 interface connections. The remaining ports use the RS232 interface. NOTE: Some models do not have SD card, modem, USB or sensor ports on the front of the console system. Avocent® ACS8000 advanced console system with all options shown. Options vary depending on the model. No model has all options shown.

Avocent® ACS800/8000 Advanced Console System USB Recovery Technical Note

Avocent® ACS800/8000 Advanced Console System Application Programming Interface (API) User Guide