Viega ManaBloc Manuals

Product Instructions PI-PF 589133 1017 (UL Rated Access Panel) (EN ES FR) 1 of 2 Viega LLC, 12303 Airport Way, Ste. 395 • Broomfield, CO 80021 • Ph: 800-976-9819 • Fax: 800-976-9817 This document subject to updates. For the most current Viega technical literature please visit www.viega.us. Viega ManaBloc® UL Rated Access Panel Installation The Viega ManaBloc uninsulated UL rated access panel is designed to fit between 16" on center framing or a similar sized opening in a masonry wall. The finished wall surface must be 1¼" thick in order for the inner frame to allow proper clearance of the supply and distribution tubing. A Assembly instructions: 1. Ensure rough opening is a sufficient size for the access panel to fit and the finished wall is a minimum of 1¼" thick. 2. With the panel in the open position, insert the frame into the opening vertically. 3. For stud installations, use 1" or longer # 8 wood screws to mount the frame to the studs. Use the mounting holes present in the inner frame. Make sure all tubing clears the frame edges before attaching the frame to the studs. Attach optional door spring (A). 4. Once the panel is latched closed you can open it with the included keys or knurled knobs. Key operation: Insert each key into the key slot and turn them clock wise to release the latches. Knob operation: Thread each knob into the key opening hand tight. Once tight, the knob can be turned a quarter turn clockwise to release the latches. Note: Make certain to leave both panel keys and/or knobs with the tenant or facility maintenance department. 1 3 4 2 Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar with Viega products and their installation. Installation by non-professionals may void Viega LLC’s warranty.

Product Instructions PI-PF 560658 1218 ManaBloc Valve Stem Replacement (EN ES FR) 1 of 2 Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us This document is subject to updates. For the most current Viega technical literature please visit www.viega.us. Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar with Viega products and their installation. Installation by non-professionals may void Viega LLC’s warranty. ManaBloc® ¼ Turn Valve Stem Replacement 1. Turn off main water supply and drain system to a point below valve needing replacement stem. Unscrew port connection nut from the port requiring the valve stem replacement as well as the ports directly above and below. Pull the fittings and tubing away from the ports. Be prepared for a small amount of water to drain from the lines. 2. Slide notched end of the removal tool behind the port. Align tool on the rib centered under the tie rod behind the port. 3. Pull removal tool firmly toward valve body. DO NOT use excessive force. When positioned properly the valve stem will pop out of the valve bore. 4. Pull valve stem out and discard. 5. Insert new stem into valve bore ensuring no debris is present on sealing surfaces. Press on stem until it snaps into place. NOTE: Valve stem MUST be installed in the "OFF" position: left side, arrow up; right side, arrow down. 6. Replace distribution lines and port nuts. HAND TIGHTEN ONLY. 7. Turn stem counter clockwise (quarter turn) to open position. Turn on water supply. 1 4 6 7 3 2 5

Viega LLC 585 Interlocken Blvd. Broomfield, CO 80021 Phone (800) 976-9819 www.viega.us Product Instructions EN Product Instructions Viega ManaBloc UL Rated Access Panel Installation This document is subject to updates. For the most current Viega technical literature please visit www.viega.us. ES Instrucciones del Producto Instalación de tablero de acceso Viega ManaBloc con clasificación UL Este documento está sujeto a actualizaciones. Para consultar la más reciente literatura técnica de Viega visitar www.viega.mx. FR Directives du Produit Installation du panneau d’accès homologué UL ManaBloc de Viega Ce document est soumis à des mises à jour. Pour consulter les manuels techniques Viega les plus récents, consultez notre site www.viega.ca. 4 Cuando el tablero quede cerrado con pestillos, puede abrirse con las llaves incluidas o con las perillas. Operación con llave: Insertar cada llave en la muesca de llave y girarlas en sentido horario para liberar los pestillos.Operación con perillas: Instalar cada perilla en las aberturas para llave y apretarlas con la mano. Cuando estén apretadas, las perillas pueden girarse un cuarto de vuelta en sentido horario para liberar los pestillos. Viega ManaBloc® UL Rated Access Panel Installation PI-PF 589133 1119 UL Rated MB Access Panel (EN ES FR) EN Viega ManaBloc UL Rated Access Panel Installation Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar with Viega products and their installation. Installation by non-professionals may void Viega LLC’s warranty. The Viega ManaBloc uninsulated UL rated access panel is designed to fit between 16" on center framing or a similar sized opening in a masonry wall. El tablero de acceso Viega ManaBloc sin aislamiento con clasificación UL está diseñado para encajar en bastidores entre postes separados 16" o en una abertura de tamaño similar en una pared de mampostería. Make certain to leave both panel keys and/or knobs with the tenant or facility maintenance department. Asegurarse de dejar ambas llaves o perillas de tablero en el departamento de mantenimiento de la instalación. 1 Ensure rough opening is a sufficient size for the access panel to fit and the finished wall is a minimum of 1¼" thick. 2 With the panel in the open position, insert the frame into the opening vertically. 3 For stud installations, use 1" or longer # 8 wood screws to mount the frame to the studs. Use the mounting holes present in the inner frame. Make sure all tubing clears the frame edges before attaching the frame to the studs. Attach optional door spring (A). 4 Once the panel is latched closed you can open it with the included keys or knurled knobs. Key operation: Insert each key into the key slot and turn them clock wise to release the latches. Knob operation: Thread each knob into the key opening hand tight. Once tight, the knob can be turned a quarter turn clockwise to release the latches. CAUTION! The finished wall surface must be 1¼" thick in order for the inner frame to allow proper clearance of the supply and distribution tubing. ADVERTENCIA! La superficie de la pared acabada debe tener un grosor de 1¼" para que el bastidor interior permita el espacio libre apropiado para la tubería de suministro y distribución. ES Instalación de tablero de acceso Viega ManaBloc con clasificación UL Los productos de Viega están diseñados para ser instalados por plomeros y mecánicos profesionales, capacitados y con licencia, que estén familiarizados con los productos Viega y su instalación. La instalación realizada por personal no profesional puede anular los términos y condiciones del producto de Viega LLC. 1 Asegurarse de que la abertura tenga el tamaño suficiente para que el tablero de acceso encaje y que la pared acabada tenga un grosor mínimo de 1¼". 2 Con el tablero en la posición abierta, insertar el bastidor verticalmente en la abertura. 3 Para instalaciones con vástagos, usar tornillos para madera #8 de 1" o más largos para montar el bastidor en los vástagos. Usar los agujeros de montaje existentes en el bastidor interior. Asegurarse de que todos los tubos queden separados de los bordes del bastidor antes de fijar el bastidor en los vástagos. Instalar el resorte de puerta opcional (A). A 1 3 2 4